• Progress in Superconductivity and Cryogenics
• /
• v.4 no.2
• /
• pp.68-72
• /
• 2002

This work investigates the transient cooling characteristics of an Infrared (IR) detector cryochamber, which has a critical effect on the cooling load. The current thermal modeling considers the conduction heat transfer through a cold well. the gaseous conduction due to outgassing. and the radiation heat transfer. The transient cooling Performance. i.e. the penetration depth and cooling load, is determined using a finite difference method. It is found that the penetration depth increases as the bore conductivity increases. Gaseous conduction and radiation hardly affect the penetration depth. The transient cooling load increases as the bore conductivity increases. The effects of gaseous conduction and radiation on transient heat transfer are weak at initial stages of cooling. However, their effects become significant as the cooling Process Proceeds.

• Journal of the Korean Chemical Society
• /
• v.18 no.4
• /
• pp.297-303
• /
• 1974

An investigation has been performed to find an effective separation method of steriols and tocopherols from the deodorized condensates of vegetable oils. Simple heating of the starting mixture isolated the oil layer from water, and the former was collected. It was then methyl esterified followed by a distillation for the removal of fatty acid. The ensuing step was to saponify the residue. The unsaponifiable matter was extracted by both methanol and concentrated. The sterol was crystallized by cooling such concentrated solution. To obtain tocopherol, the mother liquor was first dissolved in methanol. Cooling this solution to $-20^{\circ}C$ trapped fatty acid which was filtered out. The filtrate was then treated with ion exchange resin.

• Korean Journal of Poultry Science
• /
• v.41 no.3
• /
• pp.159-164
• /
• 2014

This study was conducted to investigate whether water chilling had effect on water retention, freshness or internal temperature of chicken carcasses during chilling or storage in two different chicken processing plants (designated as A and B). A total of 240 carcasses from chicken processing plants (n = 120 per chicken processing plant) was randomly sampled and evaluated the effect of water chilling on carcass characteristics (i.e., water retention, water loss or freshness during chilling or storage). Torrymeter value was used as an indicator of freshness in chicken carcasses. Water chilling did not affect carcass water retention between the processing plants. However, chicken carcasses processing in B plant exhibited significantly higher freshness (p<0.05) compared with those in A plant. This difference in freshness was mainly due to the longer transit time through the water chiller in A versus B plants. Water loss of carcasses during storage was not different between plants. It was found that carcass freshness can be affected by water chilling time as manifested in this study. Further study is warranted to see whether freshness or microbiological status of chicken carcasses may be affected depending on the chilling methods, i.e., air or water chilling.

• Journal of the Korean Data and Information Science Society
• /
• v.25 no.4
• /
• pp.705-714
• /
• 2014

This study aimed at identifying the effect of vapocoolant spray and EMLA (eutectic mixture of local anesthetics) cream upon DPT (diphtheria-pertussis-tetanus)vaccineassociated injection pain in infants. A nonequivalent control group pretest-posttest design was used. The subjects were 49 infants, 19 of them for control group, 15 of them for vapocoolant group, and 15 infants for EMLA group. Pulse and oxygen saturation as pain indicators were measured before and after DPT vaccination. FLACC was also measured after vaccination. The data were collected between October 2009 and June 2010 and analyzed using SPSS WIN 20.0. EMLA group had significant a little changes in pulse (F=43.37, p <.001) and oxygen saturation (F=9.86, p=.003) compared to the control and vapocoolant group. But there was no difference in FLACC pain score among three groups. This results showed that EMLA cream is an effective agent for reducing DPT vaccination-associated pain. Therefore, EMLA cream can be used to reduce pain at public health centers and clinical settings.

• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.333-336
• /
• 2007

A Strained Layer Multiquantum-Well (SL-MQW) distributed feedback laser at a wavelength of 1.31 um operating from $-40^{\circ}C$ to $85^{\circ}C$ without any cooling is grown by metal-organic chemical vapor deposition (MOCVD). Lasers with high slope efficiency are achieved through careful optimization of a SL-MQW active layer, especiallyoptimizing the amount of strain, the well thickness, the barrier thickness, the number of wells, and the active layer width. In this paper, we obtain the slope efficiencies of 0.38[mW/mA] and 0.26 [mW/mA] at $25^{\circ}C$ and $85^{\circ}C$, respectively. Threshold currents are 7.1[mA] and 19.8[mA] at $25^{\circ}C$ and $85^{\circ}C$, respectively.

• Applied Biological Chemistry
• /
• v.40 no.3
• /
• pp.220-224
• /
• 1997

As corn starches with different amylose content were heated at different temperature $(100^{\circ}C,\;121^{\circ}C)$ with starch / water ratio (1:3.5, 1:9) and heating-cooling treatment was repeated up to 4 times, the yield of RS(resistant starch) from heated corn starches was investigated by the enzymatic-gravimetric method and the ${\alpha}-amylase$ treatment. Compared to ${\alpha}-amylase$ method, enzymatic-gravimetric method was more effective to hydrolyze the amorphous region of heated corn starch. With increasing the amylose content and the number of heating-cooling treatment, the yield of RS increased, regardless of isolation method. Heated corn starches formed at $121^{\circ}C$ provided higher yield of RS than those formed at $100^{\circ}C$. Higher RS yield was also observed in the case of starch/water ratio (1:3.5) compared to the case of ratio (1:9).

• Korean Journal of Optics and Photonics
• /
• v.28 no.5
• /
• pp.241-249
• /
• 2017

This paper presents the design and evaluation of the optical system for an uncooled thermal-imaging camera. The operating wavelength range of this system is from $7.7{\mu}m$ to $12.8{\mu}m$. Through optimization, we have obtained a LWIR (Long Wave Infrared) optical system with a focal length of 5.44 mm, which consists of four aspheric surfaces and two diffractive surfaces. The f-number of the optical system is F/1.2, and its field of view is $90^{\circ}{\times}67.5^{\circ}$. The hybrid lens was used to balance the higher-order aberrations, and its diffraction properties were evaluated by scalar diffraction theory. We calculated the polychromatic integrated diffraction efficiency, and the MTF drop generated by background noise. We have evaluated the thermal compensation of a LWIR fixed optical system, which is optically passively athermalized to maintain MTF performance in the focal depth. In conclusion, these design results are useful for an uncooled thermal-imaging camera.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1995.10a
• /
• pp.146-151
• /
• 1995

원자력, 화력발전소 및 임해공업시설로부터 방출되는 냉각용 온수는 하천 또는 연안일대의 수계환경에 전반적인 수중온도의 상승과 가동 중단시 갑작스러운 수온 저하 등의 열균형 파괴를 가져온다. 따라서 여러가지 형태의 주위수에 영향을 받는 온배수의 이동 및 확산에 대한 정성, 정량적 예측을 위한 수치모델의 개발은 환경관리 및 생태계 보전 측면에서 매우 중요하다. (중략)

• Progress in Superconductivity and Cryogenics
• /
• v.4 no.1
• /
• pp.66-72
• /
• 2002

This paper describes numerical modeling for thermal characteristic of vapor-cooled current leads under pulse operation. The transient thermal analysis considers the temperature difference between a helium gas (low and a copper lead and temperature dependent properties of helium gas, copper and stainless steel. This numerical modeling was compensated and validated by an experiment with commercially available 100 A vapor-cooled current leads. A proper overloading factor was suggested for the current leads under pulse operation through this modeling, which can significantly reduce heat input to a cryostat.

• Journal of Welding and Joining
• /
• v.20 no.5
• /
• pp.52-54
• /
• 2002

저온균열은, 대한용접학회에서 발간한 '용접.접합용어사전'에 의하면, '용접 후 용접부의 온도가 대체로 $200^{\circ}C$ 이하의 저온에서 발생하는 균열을 총칭한다. 경우에 따라서는 실온까지 냉각한 후 일정한 기간이 경과한 후에 발생하기도 하며, 이러한 균열을 지연균열(delayed cracking)이라고 한다'로 되어 있다. 이들 저온균열의 발생에는 주로 구속응력과 경화조직 및 확산성수소가 영향을 미치고 있으며, 그 종류는 위에서 언급한 지연균열 외에 라멜라 테어링, 변형균열, 칭균열형 저온균열 등이 있다. 본 기술강좌에서는 용접부의 저온균열에 대하여 지연균열과 그 외의 저온균열로 나누어 2회에 걸쳐 소개하기로 한다.하기로 한다.