• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.10 no.4
• /
• pp.27-37
• /
• 2015

Start up a company is critical to the regional economy and job creation and so get support from government and other organizations, but there are still exist of high rate of failure and CEO's stressful fear of failure. New firms are of utmost importance for the vitality of national economic driving forces but for those failed firms, they caused social and economic problems directly and indirectly, and brought frustration to the founders. The many education and research programs about entrepreneurship and venture creation were undertaken by the country and organizations, but the education and research about the vigilance of failed to start up company were almost ignored. If the attention can be put into the research about failed companies and the research can make the founders and pre-CEOs aware the failure of establishing a company, that would be very valuable as scenarios to see the company risks. This case study shows the finding the reasons which caused the failure of small venture companies and it's implications in the filed of establishing companies. The technology based venture company which had run 10 years in Daedeok's IT field was selected as the research object. The results show that the important factors such as entrepreneur characteristics(lack of communication and management knowledge), business management(lack of business expertise) and technology(loss of unique feature of product and lack of product extension) were the root cause of failures.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2008.03a
• /
• pp.51-68
• /
• 2008

When the train enters into a tunnel a high speed, pressure waves are generated inside the tunnel. The pressure waves at propagate in a form of compression wave toward the tunnel exit and a fraction of the compression waves that arrives at the exit of the tunnel are discharged to outside of the tunnel and the remainder is reflected into the tunnel as expansion waves. The compression waves emitted from the tunnel does not radiate in a specific direction but in all directions. If the amplitude of the compression wave is great, it causes noise and vibration, and it is called "Micro-Pressure Wave." "Micro-Pressure Wave" must be considered as a decision for the optimum tunnel cross-section as the amplitude of the compression wave depends on train speed, tunnel length, area of tunnel and train. Therefore, this paper introduces the case study of Micro-Pressure Wave characteristics for determination of tunnel cross section in Honam high speed railway, the pressure inside the tunnel and the micro-pressure waves at tunnel exit were measured at Hwashin 5 tunnel in Kyungbu HSR line. At the same time. a test of train operation model was performed and then the measurement results and test results were compared to verify that the various parameters used as input conditions for the numerical simulations, which were appropriate. Also a model test was performed, in order to analysis of the Micro-Pressure Wave Mitigation Performance by Type of Hood at Entrance Portal.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.100-107
• /
• 2007

People have spent lots of time inside building about 90% of these day. Industry has been developed rapidly after I960. Construction materials had changed from natural materials to chemical materials and confidentiality of building has been more higher than before by policy of saving energy. These have caused sick-building syndrome (SBS) for us. So people want environmental construction materials for their house. We designed a environmental loess (yellow soil) finishing material which was composed of loess, water, water-soluble resin, hardener and filler. The purposes of this study were that making an environmental loess finishing material with optimum ratio, evaluating the usability of loess finishing material for wall. Furthermore it was suitable for wall to evaluate mechanical properties that are impact test, cracking test, abrasion test and de-bonding test, environmental properties that were emission of VOCs, formaldehyde and far infrared radiation.

• Journal of Life Science
• /
• v.23 no.4
• /
• pp.479-486
• /
• 2013

The DNA-binding protein from starved cells (DPS), originally identified as a DNA binding protein in Escherichia coli, is known to play an important role in DNA protection. The aim of this study was to evaluate the functional roles of DPS in E. coli against various kinds of external stresses by comparing the properties of wild-type E. coli cells and dps knockout mutant E. coli (${\Delta}dps$) cells. Under various stress conditions, we measured the cell growth of the wild-type E. coli and the dps knockout mutant E. coli (${\Delta}dps$) cells using a UV spectrophotometer. The growth rate of the cells was compared to investigate the functional roles of the DPS protein in E. coli. In comparison to the properties of the wild-type E. coli cells, the dps knockout mutant E. coli (${\Delta}dps$) cells showed highly sensitive phenotypes under various stress conditions, such as heat shock, acidic pH, nutrient deficiency, and different concentrations of reactive oxygen species (ROS), suggesting that DPS plays key roles in E. coli in combating diverse external stresses. The DPS DNA-binding protein in E. coli plays crucial roles in bacterial cell growth and in the protection of the cells from environmental stresses by tightly binding and preserving their DNA molecules.

• Journal of Sensor Science and Technology
• /
• v.5 no.5
• /
• pp.21-29
• /
• 1996

A piezoresistive silicon acceleration sensor with 8 beams, utilized by an unique silicon micromachining technique using porous silicon etching method which was fabricated on the selectively diffused (111)-oriented $n/n^{+}/n$ silicon subtrates. The width, length, and thickness of the beam was $100\;{\mu}m$, $500\;{\mu}m$, and $7\;{\mu}m$, respectively, and the diameter of the mass paddle (the region suspended by the eight beams) was 1.4 mm. The seismic mass on the mass paddle was formed about 2 mg so as to measure accelerations of the range of 50g for automotive applications. For the formation of the mass, the solder mass was loaded on the mass paddle by dispensing Pb/Sn/Ag solder paste. After the solder paste is deposited, Heat treatment was carried out on the 3-zone reflow equipment. The decay time of the output signal to impulse excitation of the fabricated sensor was observed for approximately 30 ms. The sensitivity measured through summing circuit was 2.9 mV/g and the nonlinearity of the sensor was less than 2% of the full scale output. The output deviation of each bridge was ${\pm}4%$. The cross-axis sensitivity was within 4% and the resonant frequency was found to be 2.15 KHz from the FEM simulation results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.565-575
• /
• 2009

In recent years, there have been numerous explosion-related accidents due to military and terrorist activities. Such incidents caused not only damages to structures but also human casualties, especially in urban areas. To protect structures and save human lives against explosion accidents, better understanding of the explosion effect on structures is needed. In an explosion, the blast load is applied to concrete structures as an impulsive load of extremely short duration with very high pressure and heat. Generally, concrete is known to have a relatively high blast resistance compared to other construction materials. However, normal strength concrete structures require higher strength to improve their resistance against impact and blast loads. Therefore, a new material with high-energy absorption capacity and high resistance to damage is needed for blast resistance design. Recently, Ultra High Strength Concrete(UHSC) and Reactive Powder Concrete(RPC) have been actively developed to significantly improve concrete strength. UHSC and RPC, can improve concrete strength, reduce member size and weight, and improve workability. High strength concrete are used to improve earthquake resistance and increase height and bridge span. Also, UHSC and RPC, can be implemented for blast resistance design of infrastructure susceptible to terror or impact such as 9.11 terror attack. Therefore, in this study, the blast tests are performed to investigate the behavior of UHSC and RPC slabs under blast loading. Blast wave characteristics including incident and reflected pressures as well as maximum and residual displacements and strains in steel and concrete surface are measured. Also, blast damages and failure modes were recorded for each specimen. From these tests, UHSC and RPC have shown to better blast explosions resistance compare to normal strength concrete.

• The Korean Nurse
• /
• v.20 no.4 s.112
• /
• pp.39-49
• /
• 1981

기존 간호 영역 내 간호는 질적으로, 양적으로 급격히 팽창 확대되어 가고 있다. 많은 나라에서 건강관리체계가 부적절하게 분배되어 있으며 따라서 많은 사람들이 적절한 건강관리를 제공받지 못하고 있어 수준 높은 양질의 건강관리를 전체적으로 확대시키는 것이 시급하다. 혹 건강관리의 혜택을 받는다고 해도 이들 역시 보다 더 양질의 인간적인 간호를 요하고 있는 실정이다. 간호는 또한 간호영역 자체 내에서도 급격히 확대되어가고 있다. 예를들면, 미국같은 선진국가의 건강간호사(Nurse practitioner)는 간호전문직의 새로운 직종으로 건강관리체계에서 독자적인 실무자로 그 두각을 나타내고 있다. 의사의 심한 부족난으로 고심하는 발전도상에 있는 나라들에서는 간호원들에게 전통적인 간호기능 뿐 아니라 건강관리체계에서 보다 많은 역할을 수행하도록 기대하며 일선지방의 건강센터(Health center) 직종에 많은 간호원을 투입하고 있다. 가령 우리 한국정부에서 최근에 시도한 무의촌지역에서 졸업간호원들이 건강관리를 제공할 수 있도록 한 법적 조치는 이러한 구체적인 예라고 할 수 있다. 기존 간호영역내외의 이런 급격한 변화는 Melvin Toffler가 말한 대로 ''미래의 충격''을 초래하게 되었다. 따라서 이러한 역동적인 변화는 간호전문직에 대하여 몇가지 질문을 던져준다. 첫째, 미래사회에서 간호영역의 특성은 무엇인가? 둘째, 이러한 새로운 영역에서 요구되는 간호원을 길러내기 위해 간호교육자는 어떤 역할을 수행해야 하는가? 셋째 내일의 간호원을 양성하는 간호교육자를 준비시키기 위한 실질적이면서도 현실적인 전략은 무엇인가 등이다. 1. 미래사회에서 간호영역의 특성은 무엇인가? 미래의 간호원은 다음에 열거하는 여러가지 요인으로 인하여 지금까지의 것과는 판이한 환경에서 일하게 될 것이다. 1) 건강관리를 제공하는 과정에서 컴퓨터화되고 자동화된 기계 및 기구 등 새로운 기술을 많이 사용할 것이다. 2) 1차건강관리가 대부분 간호원에 의해 제공될 것이다. 3) 내일의 건강관리는 소비자 주축의 것이 될 것이다. 4) 간호영역내에 많은 새로운 전문분야들이 생길 것이다. 5) 미래의 건강관리체계는 사회적인 변화와 이의 요구에 더 민감한 반응을 하게 될 것이다. 6) 건강관리체계의 강조점이 의료진료에서 건강관리로 바뀔 것이다. 7) 건강관리체계에서의 간호원의 역할은 의료적인 진단과 치료계획의 기능에서 크게 탈피하여 병원내외에서 보다 더 독특한 실무형태로 발전될 것이다. 이러한 변화와 더불어 미래 간호영역에서 보다 효과적인 간호를 수행하기 위해 미래 간호원들은 지금까지의 간호원보다 더 광범위하고 깊은 교육과 훈련을 받아야 한다. 보다 발전된 기술환경에서 전인적인 접근을 하기위해 신체과학이나 의학뿐 아니라 행동과학 $\cdot$ 경영과학 등에 이르기까지 다양한 훈련을 받아야 할 필요가 있다. 또한 행동양상면에서 전문직인 답게 보다 진취적이고 표현적이며 자동적이고 응용과학적인 역할을 수행하도록 훈련을 받아야 한다. 그리하여 간호원은 효과적인 의사결정자$\cdot$문제해결자$\cdot$능숙한 실무자일 뿐 아니라 소비자의 건강요구를 예리하게 관찰하고 이 요구에 효과적인 존재를 발전시켜 나가는 연구자가 되어야 한다. 2. 미래의 간호교육자는 어떤 역할을 수행해야 하는가? 간호교육은 전문직으로서의 실무를 제공하기 위한 기초석이다. 이는 간호교육자야말로 미래사회에서 국민의 건강요구를 충족시키기는 능력있는 간호원을 공급하는 일에 전무해야 함을 시사해준다. 그러면 이러한 일을 달성하기 위해 간호교육자는 무엇을 해야 하는가? 우선 간호교육자는 두가지 측면에서 이 일을 수정해야 된다고 본다. 그 하나는 간호교육기관에서의 측면이고 다른 하나는 간호교육자 개인적인 측면엣서이다. 우선 간호교육기관에서 간호교육자는 1) 미래사회에서 요구되는 간호원을 교육시키기 위한 프로그램을 제공해야 한다. 2) 효과적인 교과과정의 발전과 수정보완을 계속적으로 진행시켜야 한다. 3) 잘된 교과과정에 따라 적절한 훈련을 철저히 시켜야 한다. 4) 간호교육자 자신이 미래의 예측된 현상을 오늘의 교육과정에 포함시킬 수 있는 자신감과 창의력을 가지고 모델이 되어야 한다. 5) 연구 및 학생들의 학습에 영향을 미치는 중요한 의사결정에 학생들을 참여시키도록 해야한다. 간호교육자 개인적인 측면에서는 교육자 자신들이 능력있고 신빙성있으며 간호의 이론$\cdot$실무$\cdot$연구면에 걸친 권위와 자동성$\cdot$독창성, 그리고 인간을 진정으로 이해하려는 자질을 갖추도록 계속 노력해야 한다. 3. 미래의 간호원을 양성하는 능력있는 간호교육자를 준비시키기 위한 실질적이면서도 현실적인 전략은 무엇인가? 내일의 도전을 충족시킬 수 있는 능력있는 간호교육자를 준비시키기 위한 실질적이고 현실적인 전략을 논함에 있어 우리나라의 실정을 참조하겠다. 전문직 간호교육자를 준비하는데 세가지 방법을 통해 할 수 있다고 생각한다. 첫째는 간호원 훈련수준을 전문직 실무를 수행할 수 있는 단계로 면허를 높이는 것이고, 둘째는 훈련수준을 더 향상시키기 위하여 학사 및 석사간호교육과정을 발전시키고 확대하는 것이며, 셋째는 현존하는 간호교육 프로그램의 질을 높이는 것이다. 첫째와 둘째방법은 정부의 관할이 직접 개입되는 방법이기 때문에 여기서는 생략하고 현존하는 교과과정을 발전시키고 그 질을 향상시키는 것에 대해서만 언급하고자 한다. 미래의 여러가지 도전에 부응할 수 있는 교육자를 준비시키는 교육과정의 발전을 두가지 면에서 추진시킬 수 있다고 본다. 첫째는 국제간의 교류를 통하여 idea 및 경험을 나눔으로서 교육과정의 질을 높일 수 있다. 서로 다른 나라의 간호교육자들이 정기적으로 모여 생각과 경험을 교환하고 연구하므로서 보다 체계적이고 효과적인 발전체인(chain)이 형성되는 것이다. ICN같은 국제적인 조직에 의해 이러한 모임을 시도하는 것인 가치있는 기회라고 생각한다. 국가간 또는 국제적인 간호교육자 훈련을 위한 교육과정의 교환은 한 나라안에서 그 idea를 확산시키는데 효과적인 영향을 미칠 수 있다. 충분한 간호교육전문가를 갖춘 간호교육기관이 새로운 교육과정을 개발하여 그렇지 못한 기관과의 연차적인 conference를 가지므로 확산시킬 수도 있으며 이런 방법은 경제적인 면에서도 효과적일 뿐만 아니라 그 나라 그 문화상황에 적합한 교과과정 개발에도 효과적일 수 있다. 간호교육자를 준비시키는 둘째전략은 현존간호교육자들이 간호이론과 실무$\cdot$연구를 통합하고 발전시키는데 있어서 당면하는 여러가지 요인-전인적인 간호에 적절한 과목을 이수하지 못하고 임상실무경험의 부족등-을 보충하는 방법이다. 이런 실제적인 문제를 잠정적으로 해결하기 위하여 1) 몇몇 대학에서 방학중에 계속교육 프로그램을 개발하여 현직 간호교육자들에게 필요하고 적절한 과목을 이수하도록 한다. 따라서 임상실무교육도 이때 실시할 수 있다. 2) 대학원과정 간호교육프로그램의 입학자의 자격에 2$\~$3년의 실무경험을 포함시키도록 한다. 결론적으로 교수와 학생간의 진정한 동반자관계는 자격을 구비한 능력있는 교수의 실천적인 모델을 통하여서 가능하게 이루어 질수 있다고 믿는 바이다.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.1-29
• /
• 2013

Surrealism with the excavation of unconsciousness, seeking for the infinity etc. has established views on aesthetics that conflict traditional western rationalism. The main concern of surrealism is problem of identity and difference. They attempted their own mysterious concept such as 'the marvelous', 'convulsive beauty', 'object chance' etc. These unique views on aesthetics was expressed as various style of art. It is the d$\acute{e}$paysemant that exists one of the typical style in surrealism. D$\acute{e}$paysemant means that objects are taken from be originally place. Therefore, The real world's objects is to leave and change environment from real space as use, ability, meaning of origin. or it is the technique to create surreal illusion that combined to a strange place where relates to extraneous attribute of objects. Namely, objects are newly arranged in expression space. Reconstitutive objects by positioning object over the time and space have given us the marvelous and psychological shock and get unfamiliar meaning and feeling over. This paper is tried to look at the way to use the d$\acute{e}$paysemant which applicated in the media, Especially, focusing on animation. Unlike the other media, animation has its unique artistic characters. First, One of the media characteristics of the animation is creativity images of the hand drawn animation by shooting of frame by frame. The animation image which is created through arrangement obtain life force by unique motility. Works of Norman McLaren and Harry Smith are very interesting that the structural characteristics of the d$\acute{e}$paysemant. It consists with abstract forms and various moving images to let audience the feel characteristics of film. We can experience from these cases, numerous illusion fantasy like change over from creature to inanimate object, space and time, creation and extinction, repetition and metamorphosis etc. One of the main apparat is the emphasis of d$\acute{e}$paysemant in space of frame. In conclusion, d$\acute{e}$paysemant is one of the most characteristic expression technique of surrealism while having inevitable linkage with animation.

• Journal of the Korean Vacuum Society
• /
• v.20 no.3
• /
• pp.233-241
• /
• 2011

Currently, solar module is using the two methods such as a glass-filled method or a super-straight method. The common point of these methods is to use glass structure on the front of solar module. However, the reflectance of the solar module is high depending on the height of the incident sunlight due to the flat surface of the module front glass. Purposed to solve these problems, AG (anti-glare) structures were formed on the glass surface. Next is fabrication methods of AG structure. First, uneven structure made by micro blaster equipment was dipped in Hydro-fluidic acid (HF) acid. HF acid process was carried out to remove particles and to make high transmittance. The reflectance and transmittance of the anti-glare glass was compared to those of the bare glass. The reflectance of anti-glare glass decreased approximately 1% compared with bare glass. The transmittance of anti-glare glass was similar to bare glass. According to the sample angle, the difference of the reflectance between bare glass and the anti-glare glass was about 19%. Isc and efficiency value of anti-glare glass on bare solar cell appeared about 3.01 mA and 0.228% difference compared with bare glass. Anti-glare glass on textured solar cell appeared about 9.46 mA and 0.741% difference compared with bare glass. As a result, the role of anti-glare in the substrate is to reduces the loss of sunlight reflected from the surface. In this study, therefore, AG structure on the solar cell was used to improve the efficiency of solar cell.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.8 no.2
• /
• pp.232-241
• /
• 1997

The psychological problems following the experiences of school-violence could be more important than the physical problems. Victims could suffer from fear, depression, anger, lowered self-esteem, suicidal thought, and personality changes. To study the risk factors for school violence and the psychiatric problems after the experiences to school-violence provide us important informations to prevent and solve the problems of school violence. We examined clinical characteristics and psychosocial backgrounds of 13 adolescents who visited the psychiatric clinic after exposures to school violence from September, 1996 to May, 1997. The clinical data included intensity, motivations, durations, and methods of violence, psychiatric symptoms following exposure, findings of psychological test, and treatment course. The socioeconomic data included developmental characteristics of subjects, family characteristics, school life, and peer relationships. Of the 13 adolescents who experienced exposure to violence, 8 have experienced chronic psychiatric disturbances, 5 experienced transient psychiatric symptoms such as anxiety, depression, suicidal attempt who eventually returned to home and school life. Of the 8 adolescents who experienced chronic psychiatric disturbances, 4 experienced PTSD and depression lasting 3-6 months more, otherwise 4 showed converted features, such as aggressive behavioral disorder or perpetrator by strong compensatory effects after psychological shock. The subjects who have experienced chronic psychiatric disturbance have clinical characteristics such as physical or emotional abuse, physical illness or handicap, defects of ego functionings, and lack of family support. In summary, victims by school-violence manifested serious psychiatric disturbances, and they had clinically significant risk factors and some of them became perpetrators of school-violence.