• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.57-62
• /
• 1992

박판 성형 공정에서는 복잡한 실제 차체판넬을 금형설계단계에서 빠르고 효율적으로 해석하기 위해 평면 변형 문제로 취급할 수 있는 많은 국부 단면들에 대해 단면 해석방법이 쓰이고 있다. 최근에 박박이론 및 굽힘 에너지가 보강된 박막 요소에 근거한 내연적 강소성 유한 요소 해석이 많이 연구되어 왔다. 본 연구에서는 박판 성형 공정의 단면 해석을 위해 외연적 강소성 유한 요소법을 사용하였고, 접촉처리는 직접적 시행착오법을 사용하였다. 또한 본 연구의 적합성을 보이기 위해 평면 변형을 가정한 실린더형 펀치 스트레칭과 트렁크 리드 대칭 단면을 해석하였다.

• 한국정밀공학회지
• /
• 제19권9호
• /
• pp.74-81
• /
• 2002

Recently tube hydroforming has been widely applied to the automotive industries due to its several advantages over conventional methods. In this paper, attention is paid to comparison of an implicit and an explicit finite element method widely used for numerical simulation of a hydroforming process. For an explicit FEM, a huge amount of computational time is required because of the very small time increment to solve a quasi-static problem. Hence, when an explicit FEM is used fDr a hydroforming process, it is general to convert the real problem to a virtual problem with a different processing time and mass density by appropriate scaling factor. However it is difficult to figure out how large the scaling should be adopted enough to ignore the dynamic effects and maintain the desired accuracy. In this paper, the comparison of the results obtained from both methods focus on the accuracy of the predicted geometrical shape and the stress with various scaling factors which are applied to analyze hydroforming process of an automobile lower arm.

• 한국정밀공학회지
• /
• 제22권3호
• /
• pp.78-85
• /
• 2005

The static implicit finite element method is applied effectively to analyze total roof panel stamping processes, which include the forming stage. complicated and abnormal Large size roof panel was analyzed by using commercial program called AutoForm. Analysis results examining possibility and validity of the AutoForm software and the factor study are presented. Further, the simulated results for the total roof panel stamping processes are shown and discussed. Its application is being increased especially in the automotive industrial area for the cost reduction, weight saving, and improvement of strength.

• 한국기계가공학회지
• /
• 제4권1호
• /
• pp.30-36
• /
• 2005

The static implicit finite element method is applied effectively to analyze total tray panel stamping processes, which include the forming stage. Complicated and abnormal large size tray panel was analyzed by using commercial program called AutoForm. Analysis results examining possibility and validity of the AutoForm software and the factor study are presented. Further, the simulated results for the total tray panel stamping processes are shown and discussed. Its application is being increased especially in the automotive industrial area for the cost reduction, weight saving, and improvement of strength.

• 대한기계학회논문집A
• /
• 제29권1호
• /
• pp.145-155
• /
• 2005

In this study, a finite element method program code which can be accomodate boundary conditions on the complex surfaces has been developed to simulate polymer extruder processes. The analysis method includes the fractional 4-step method for efficient computation time and compact usage of memory storage to solve the velocities and the pressure values from the Navier-Stokes equation. By using the developed program which was verified with simple Poiseuille flow mixture phenomena in single-and twin-screw extruder are analyzed. It is concluded that the proposed method resulte Poiseuille Poiseuille d in fair agreement with the exact solution of simple flow and the back flow near the entrance happens in single-screw model. It is identified that the location and values of maximum pressure in the twin screw extruder model. It is expected that the Velocity field found can be used to predict the degree of mixture in the extruder barrel.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.398-401
• /
• 2005

The characteristic of sheet metal process is the few loss of material during process, the short processing time and the excellent price and strength. Such press-forming process are the used machine ability and the characteristic, used material, the accuracy of the part which becomes processing and side condition of a process are considered and the designed. The purpose of this study is apply efficiently sheet metal forming processing by 3D formation-analyzed program simulations in the site. By a study, forming process was simulation to drawing and trimming and cam process using static-implicit method software. By making apply this to an industrial site the productivity improvement and cost reduction etc. effect able was predicted.

• Composites Research
• /
• 제26권6호
• /
• pp.363-372
• /
• 2013

RTM (Resin Transfer Molding) 공정을 수치해석하기 위해 Level set 방법과 결합된 확장 유한 요소 법을 적용하였다. 유동 전면 부에서 비연속적인 구배를 가지는 압력을 계산하기 위해 확장 유한 요소 법을 이용하여 계산의 정밀성을 높였다. 확장 유한 요소 법에 이용되는 확장 형상 함수는 Level set 값을 이용하여 정의하였다. 이 확장 형상 함수는 요소를 통과하는 수지 유동 전면부의 위치를 반영할 수 있다. 게다가 Level set 법이 금형 충전 동안 수지 유동 전면부의 위치를 계산할 때 적용되었다. 수지 유동 전면부의 위치를 계산하는 미분방정식은 내연적 특성 Galerkin 유한 요소 법을 적용하여 풀었다. 선형 시스템 계산에서는 IPSAP의 다중 프론트 솔버를 이용한다. 본 연구에서 계산한 해석 값은 이론 값과 비교하여 검증하였다. 계산 효율을 높이기 위해 확장 유한 요소 법과 Level set 방법의 국소화 기법이 제안되었다. 이 기법은 계산 영역을 수지 유동 전면 부 근처의 영역으로 축소한다. 그러므로 전체 계산 양은 최소화될 수 있었다. 이 기법의 계산 효율은 채널 유동 모델을 이용하여 평가된다. 본 연구의 해석 능력을 보여주기 위해 몇 가지 적용 예제를 계산하였다. 첫 번째 예제를 이용해서 복잡하게 흘러가는 수지 전면부의 갈라짐과 합쳐지는 현상 해석하였다. 그리고 금형 내부의 Race-tracking 효과와 기공 생성 현상을 확인하기 위해 복잡한 모양의 구조물을 시뮬레이션 하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.122-125
• /
• 2005

The AutoForm previously used the membrane element and it accomplished sheet metal forming analysis. The membrane analysis has been widely applied to various sheet metal forming processes because of its saving time effectiveness. However, it's well known that the membrane analysis can not provides correct information for the processes which considerable bending effects. From this time research it tried to compare the formation analysis result which uses the shell element which is applied newly in the AutoForm and actual products. The shell element is compromise method between continuum analysis and membrane analysis. The Finite element method by using shell element is the most economical numerical method. From analysis results, FEA by using shell element can estimate accurately the problems happened in actual auto-body panel.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.783-788
• /
• 2000

Hydroforming is a method for forming circular tubes. If this technology is to be applied economically, it is essential to have knowledge of the avoidance of failure cases as well as of the behavior of the tube in the tool under the compressive stress and forces that are exerted by the machine. A finite element simulation for manufacturing of lower arm from straight tubes, using the hydroforming method, was performed to investigate the effects of varying process parameters. Explicit method is used to simulate hydroforming in many cases, but that is not included flow rule. And then it needs simulation for implicit method. It was simulated by two methods, implicit and explicit, to compare the result of the hydroforming.

• 대한기계학회논문집A
• /
• 제32권10호
• /
• pp.890-896
• /
• 2008

Sheet metal forming is one of the most useful and important method in manufacturing of the autobody panels because of the excellent production rate. The objectives of sheet metal forming processes are getting a desired geometrical shape of products with good quality, low cost and reasonable lead time. In this paper, we examined the validity of finite element method analysis on the automobile FRT-PLR-L/R stamping process by using the lancing engineering method. Lancing is a press operation in which a single-line cut or slit is made on part way across the strip stock, without removing any metal. As a result, it has shown that the proper lancing engineering method could prevent fracturing by improving sheet metal flow.