Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

A Study of Tool Planning for FRT-PLR-L/R Stamping Process by using Forming Analysis

성형해석을 이용한 프론트 필라의 성형 공법 개발에 관한 연구

  • 정동원 (제주대학교 기계에너지시스템공학부) ;
  • 고대림 (울산대학교 대학원 기계자동차공학부)
  • Published : 2008.10.01
Download PDF
⟨ Previous Next ⟩

Abstract

Sheet metal forming is one of the most useful and important method in manufacturing of the autobody panels because of the excellent production rate. The objectives of sheet metal forming processes are getting a desired geometrical shape of products with good quality, low cost and reasonable lead time. In this paper, we examined the validity of finite element method analysis on the automobile FRT-PLR-L/R stamping process by using the lancing engineering method. Lancing is a press operation in which a single-line cut or slit is made on part way across the strip stock, without removing any metal. As a result, it has shown that the proper lancing engineering method could prevent fracturing by improving sheet metal flow.

Keywords

References

  1. Ko, H. H., Jung, D. W., Ahn, H. G., Lee, C. H., Ahn, B. L. and Moon, W. S., 2006, "A Study of Tool Planning for Forming Analysis in REF SILL OTR-R/L Auto-Body Panel Stamping Process," Journal of the KSPE, Vol. 23, No. 3, pp. 118-124
  2. Jung, H. S. and Lee, S. S., 2002, "Automatic Design Supporting System for Automobile Stamping Tool," Journal of the KSPE, Vol. 19, No. 8, pp. 194-202
  3. Shim, H. B., Jang, S. D. and Park, J. K., 2004, "A Study on the Generation of Initial Shape for the Initiation of Optimal Blank Design Sequence," Transactions of Materials Processing, Vol. 13, No. 1, pp. 90-101 https://doi.org/10.5228/KSPP.2004.13.1.090
  4. Shim, H. B., Lee, S. H., Park, J. K. and Kim, H. U., 2003, "Development of Stamping Process Optimization System: Integration of Optimal Blank Design and Optimal Nesting," Proceedings of 2003 Spring Conference on the Korean Society for Technology of Plasticity, pp. 283-287
  5. Chung, W. J., Park, C. D., Song, Y. J. and Oh, S. W., 2006, "Trimming Line Design using Incremental Development Method and Finite Element Inverse Method," Transactions of Materials Processing, Vol. 15, No. 6, pp. 445-452 https://doi.org/10.5228/KSPP.2006.15.6.445
  6. Song, Y. J., Hahn, Y. H, Park, C. D. and Chung, W. J., 2006, "Trimming Line Design of Auto-body Panel with Complex Shape Using Finite Element Inverse Method," Transactions of Materials Processing, Vol. 15, No. 6, pp. 459-466 https://doi.org/10.5228/KSPP.2006.15.6.459
  7. Hibbit, H.D., Marcal, P.V., and Rice, J.R., 1970, "Finite element formulation for problems of large strain and large displacements," Int. J. Solids Struct., Vol. 6, pp. 1069-1089 https://doi.org/10.1016/0020-7683(70)90048-X
  8. Son, H. S. and Kim, Y. S., 2001, "Strain Path Dependence of Forming Limits Predicted by Barlat and Lian's Non-Quadratic Anisotropic Yield Criterion for Sheet Materials," KSME int. J., Vol. 15, No. 2, pp. 210-216
  9. Autoform user's manual.

Cited by

  1. A Study on Forming of Silencer Case Using Virtual Tryout Method vol.34, pp.9, 2010, https://doi.org/10.3795/KSME-A.2010.34.9.1167
  2. A Development of Lancing Engineering Method for Lamp-CAN Stamping Process by Using Forming Analysis vol.337, pp.1662-8985, 2011, https://doi.org/10.4028/www.scientific.net/AMR.337.443