• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.117-123
• /
• 2021

In this study, the composite was prepared by mixing SiOx, soft carbon, and carbon black and the electrochemical properties of lithium ion battery were investigated. The content of SiOx added to improve the capacity of the soft carbon anode material was varied to 0, 6, 8, 10, 20 wt%, and carbon black was added as a structural stabilizer for reducing the volume expansion of SiOx. The physical properties of prepared CB/SiOx/C composite were investigated through XRD, SEM, EDS and powder resistance analysis. In addition, the electrochemical properties of prepared composite were observed through the charge/discharge capacity, rate and impedance analysis of the lithium ion battery. The prepared CB/SiOx/C composite had an inner cavity capable of mitigating the volume expansion of SiOx by adding carbon black. The formed internal cavity showed a low initial efficiency when the SiOx content was less than 8 wt%, and low cycle stability when the content of SiOx was less than 20 wt%. The CB/SiOx/C composite containing 10 wt% of SiOx showed an initial discharge capacity of 537 mAh/g, a capacity retention rate of 88%, and a rate of 79 at 2C/0.1C. SiOx was added to improve the capacity of the soft carbon anode material, and carbon black was added as a structural stabilizer to buffer the volume change of SiOx. In order to use the CB/SiOx/C composite as a high-efficiency anode material, the mechanism of the optimal SiOx and the use of carbon black as a structural stabilizer was discussed.

• Korean journal of food and cookery science
• /
• v.11 no.1
• /
• pp.69-76
• /
• 1995

This study was concentrated on the subject of chou formation and physicochemical characteristics on medium flour mixed with 0, 25, 50, 75, 100% of rice flour in order to clarify the possibility to substitute rice flour for wheat flour on chou preparation. The water holding capacity, swelling power, and maximum viscosity were higher in rice flour than those in medium flour but the initial pasting temperature was equal to 65$^{\circ}C$ in the two flour groups. The ratio of setback during cooling became 0.94 in the rice flour and 1.14 in the medium flour. So, the rice flour showed a slow tendency during gel formation as compared with the medium flour. The volumes of the rice choux were ranged from 80.0% to 89.0% according to the mixing ratio of medium flour as compared with that of the chou of wheat flour. But, the choux formation were increased as much as 108.8% out the paste added gelation of glutinous substance and 124.4% at the paste added Span20 of emulsifier compared to the non-addition treatment. The paste of rice flour added gelatin and Span20 showed better dispersion of components, especially, the small granules of lipid were fairly or plentifully dispersed in the paste added Span20 due to emulsifying activity. In sensory evaluation, the chou of l00% rice flour was inferior to that of medium flour on cavity-forming but the choux of wheat flour mixed with 25%, 50%, and 75% of rice flour were equal or superior to that of medium flour on all characteristics tested such as appearance, surface color, cavity-forming, chewiness, and taste. There were no significant differences on the cavity-forming expansion and taste between choux of rice flour and wheat flour Therefore, the results of this study made conclusion that rice flour would be substituted for wheat flour on the chou preparation.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.1
• /
• pp.88-99
• /
• 2009

This study was conducted to formulate management guidelines for Natural monumental old trees in Korea through survey of tree vigor and analysis of growing environments. A total of 20 old trees designated as natural monuments in Seoul, Incheon, and Gyeonggi Province were surveyed. The biological characteristics were surveyed with 4 items of species, ages and height of trees. The surrounding environments were surveyed with 2 items of location types and surroundings. The root conditions were surveyed with 2 items of denudation and molding depth. The health conditions were surveyed with 5 items of withering rate, cavity size, bark breakaway rate, damages by blight and insects, and growing tips. The soil conditions were surveyed with 6 items of PH, organic contents, valid phosphoric acid, transposal cations(K, Ca) and soil compaction. On the basis of outcomes of these research items, mutual relations among locations, growings and soil conditions of old trees were analyzed by carring out cross tabulation, correlation, and simple and multiple regression. Management guidelines were presented searching the factors effecting on the health of the monumental old trees. On the biological characteristics, the old trees designated as natural monuments were Pinus bungeana(4 trees), Juniperus chinensis(3 trees), Ginkgo biloba(3 trees), Poncirus trifoliata(2 trees). Actinidia arguta, Wisteria floribunda, Thuja orientalis, Quercus mongolica, Sophora japonica, Fraxinus rhynchophylla, Zelkova serrata, and Pinus densiflora. The tree height ranged from 4.2 to 39.2m, and root collar rounds ranged from 1.01 to 15.2m. On the surrounding environments, The location types ; Gardens(4), historical sites(5), residental sections(3) open agricultural fields(3), mountain hills(3), and near ocean beaches(1) and stream site(1). The surroundings ; 75% denudation of roots, molded more than 10cm except 4 trees(25%). On the health conditions, 1)Withering rate ; Ginkgo biloba(20%) in Yongmoon temple, (5%) in Saki-ri, kanwha-gun, and others had no withering rate. 2) Cavity size ; all subject had $5{\sim}100cm^3$ of cavity. 3) Bark breakaway rate ; Pinus bungeana in Soosong-dong, in the shrine of Confucius, in Samchung-dong, especially high rate of cavity(5~50%) in Seoul area and in Saki-ri, Kangwha-gun were high 45% brakeaway rate. 4) Damages by blight and insects was slight due to managements. 5Growing tips ; In cases of Juniperus chinensis in Changdeok palace and SunnogDang, seoul, growing tips were 1/2, presumably cause by air pollution, and in cases of Fraxinus rhynchophylla in Paju city and Pinus densiflora in BacksaDorip-ri, Icheon city, growing tips were fine, presumably because there were no moldings. On the Soil conditions, Soil pH ranged from 5.2 to 8.3, organic matter contents from 12% to 56%, phosphorus contents from 104 to 618ppm, soil compaction ranged from 7 to 28mm( among them, Denudation was severe with 21~28mm soil compactions in cases of Pinus bungeana in Soosong -dong, Thuja orientalis in Samchung -dong, Ginkgo biloba in the shrine of Confucius and in Yongmoon temple.) Results of cross tabulation, correlation, and regression analysis showed that molding depth was the most serious factor to deteriorate the tree vigor and cambium conductivity. In addition, soil acidity, organic matter contents, disease and insect damages and cambial detachment were also related to the tree vigor. Additional research of these relationships will be needed to conduct more detailed studies. Based on the relationships between the tree vigor and growing environments, it is considered that old trees should be managed to give them more growing spaces and less abuses. Also, molded soils should be removed and further soil-molding around the tree collar should be prohibited. For the construction of systematic management and removal of harmful factors, appropriative management according to spices, persistent monitering of damaged cases and construction of management system through the accumulation of data on the relationships of soil conditions are required.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.1
• /
• pp.122-142
• /
• 2009

This study explored all domestic and international theories for maintenance and health enhancement of an old and big tree, and carried out the anatomical survey of the operation part of the tree toward he current status of domestic surgery and the perception survey of an expert group, and drew out following conclusion through the process of suggesting its reform plan. First, as a result of analyzing the correlation of the 67 subject trees with their ages, growth status. surroundings, it revealed that they were closely related to positional characteristic, damage size, whereas were little related to materials by fillers. Second, the size of the affected part was the most frequent at the bough sheared part under $0.09m^2$, and the hollow size by position(part) was the biggest at 'root + stem' starting from the behind of the main root and stem As a result of analyzing the correlation, the same result was elicited at the group with low correlation. Third, the problem was serious in charging the fillers (especially urethane) in the big hollow or exposed root produced at the behind of the root and stem part, or surface-processing it. The benefit by charging the hollow part was analyzed as not so much. Fourth, the surface-processing of fillers currently used (artificial bark) is mainly 'epoxy+woven fabric+cork', but it is not flexible, so it has brought forth problems of frequent cracks and cracked surface at the joint part with the treetextured part. Fifth, the correlation with the external status of the operated part was very high with the closeness, surface condition, formation of adhesive tissue and internal survey result. Sixth, the most influential thing on flushing by the wrong management of an old and big tree was banking, and a wrong pruning was the source of the ground part damage. In pruning a small bough can easily recover itself from its damage as its formation of adhesive tissue when it is cut by a standard method. Seventh, the parameters affecting the times of related business handling of an old and big tree are 'the need of the conscious reform of the manager and related business'. Eighth, a reform plan in an institutional aspect can include the arrangement of the law and organization of the old and big tree management and preservation at an institutional aspect. This study for preparing a reform plan through the status survey of the designated old and big tree, has a limit inducing a reform plan based on the status survey through individual research, and a weak point suggesting grounds by any statistical data. This can be complemented by subsequent studies.

• Geophysics and Geophysical Exploration
• /
• v.11 no.4
• /
• pp.302-309
• /
• 2008

ERT imaging, especially 3-D method, is a very powerful means to obtain a very high resolution image of the subsurface for geotechnical or hydrogeological problems. In this paper, we introduce two examples of successful case histories, where the imaging targets were three-dimensional. First example is the case of 3-D fracture imaging for hydrogeologic application. In this example, the borehole deviation was a critical problem in the ERT imaging and we could obtain real 3-D attitude of fracture system by including the borehole deviation in the inversion. In the second case, we did field experiment to image the empty tunnel with the size of $2m{\times}2m$ and the target was very clearly imaged in 3-D space. In these examples, we could show that 3-D ERT imaging is a very powerful tool for the 3-D subsurface imaging and the method can provide enhanced imaging capabilities especially for the 3-D targets such as fractures and cavities or tunnel.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.3
• /
• pp.223-233
• /
• 2016

Design of a vegetation type sound barrier was presented as a noise barrier on the boundary of neighborhood facilities including schools, and apartments. The suggested noise barrier is made of unit blocks that are to be formed by stacking over the wall structure containing the plant and soils in the blocks. The advantage of the vegetation noise barrier is to acquire not only sound absorptive effects of plants and soils, but also sound diffusive effect caused by the irregular surface of the barrier which could eventually mitigate the noise. First, the optimum size of the units to obtain the highest noise reduction was investigated using 1/10 scaled model experiment, and sound attenuation experiments were carried out using a 1/2 mock-up model which is 2 m high and 5 m long. Total 1,137 unit blocks were made of synthetic woods with the size of $10{\times}10{\times}9cm$. These unit blocks were installed on the both side of the 1/2 mock-up steel framed noise barrier. As a result, it was revealed that the block typed vegetation noise barrier has 7 dB higher insertion loss in comparison with the general plane noise barrier. Also, it was found that the appropriate size of unit blocks is $20{\times}20cm$ which has large effect of sound insertion loss.

• Land and Housing Review
• /
• v.6 no.2
• /
• pp.101-106
• /
• 2015

In order to minimize regional disparities between the North and the South, it is very important to reduce shortages of food and energy in North Korea in the short and mid-term. In the long term, it is important to reduce not only regional disparities between two Koreas but also regional disparities in North Korea. It is important to consider national policies of the North, the South and other countries in Northeast Asia in the process of building regional development policies for North Korea because the future of regional development in North Korea depends on policies of stakeholder in Northeast Asia. This study suggest some policy directions for regional development in North Korea. At first, building new industries, such as hi-tech industries and MICE, is important for regional development potentials in North Korea. Also, we should take some special development strategies according to regional potentials in North Korea. For example, Nampo region should be specialized through hi-tech industries. Wonsan region should be specialized through MICE. Finally, this study suggests some policy issues to the South Korean government. Financial support from South Korean government about inter-Korean economic cooperation should have priorities on the regions where have potentials of hi-tech industries and MICE. Also, we should implement inter-Korean economic cooperation policies under consideration about spatial aspects.

• The Journal of the Korean life insurance medical association
• /
• v.25
• /
• pp.49-62
• /
• 2006

생명공학의 시대로 일컬어 지고 있는 오늘날, 재생의학 분야에서는 난치성 질환 치료를 목적으로 활발한 연구가 진행되고 있다. 특히, 줄기세포를 이용한 세포 대체치료 관련 연구는 최근 국내 황우석 박사의 체세포 핵이식 배아세포주 확립에 이르기 까지 괄목할 만한 발전을 보여 주고 있다. 이와 관련해 생명보험산업에 적잖은 파장이 예상되며, 생명보험사 내부적으로 기존에 판매된 상품의 사차손 관리와 함께 급속도로 발전하는 줄기세포 연구에 직접적으로 대응하는 상품개발, 언더라이팅, 지급 심사 등 보험사 내외에서의 전방위적인 변화가 필요하다는 문제 제기가 있다. 줄기세포란 조직 분화 과정에서 볼 수 있는 세포이며 근육 뼈 뇌 피부 등 신체의 어떤 기관으로도 전환할 수 있는 만능세포로서, 간 폐 심장 등 구체적 장기를 형성하기 이전에 분화를 멈출 배아 단계의 세포를 말한다. 한편, 성체줄기세포는 조직이나 기관의 분화된 세포들 사이에서 발견되는 미분화 세포로써, 자기 스스로 증식할 수 있으며, 조직이나 기관의 특수한 기능을 가지고 있는 세포로 분화할 수 있는 능력을 가진 신체줄기세포를 말한다. 배아줄기세포와 생체줄기세포를 통한 장기이식 등 난치병 정복은 윤리적, 사회적으로 많은 논란이 예상되며, 기술적으로도 해결해야 할 문제점들이 산적해 있기 때문에 아직은 요원한 것이 사실이다. 현재 유럽 대부분의 나라와 미국에서는 인간 배아의 복제가 금지되어 있으며, 일본 정부는 연구용 배아 복제를 제한적으로 허용하고 있다. 하지만, 우리 나라의 경우 2005년 1월에 '생명윤리 및 안전에 관한 법'이 발효되었지만 정부는 관련 부작용에 대한 깊은 고찰 없이 전폭적인 지원들 약속하고 있는 실정이다. 줄기세포 연구의 발달로 인해 인류가 난치병 치료의 첫 장을 열었다고 하더라도 그 영향이 당장 보험사에 미친다고 할 수는 없다. 왜냐하면 앞으로 이러한 신기술이 실제 의료행위에 적용되기 위해서는 여러 단계의 안정화 작업과 임상시험이 필요한데 이러한 작업이 기술적으로 어렵고 그 시간도 만만치 않게 걸리기 때문이다. 또한, 보험사의 보장은 크게 사망/수술/입원/암/기타보장으로 구별할 수 있는데, 줄기세포 연구의 발달과 관련이 있는 보장이 제한되어 있어 보험사에 미치는 영향이 당장 우려할 만한 수준이라 할 수 없다. 하지만 만약 치료용 줄기세포 배양으로 인한 장기 기관의 이식이나 손상세포의 대체 등과 같은 의학신기술의 예상 외로 급격하게 발전한다면 보험사의 Risk 관리에 상당한 저해요인으로 작용할 것으로 판단된다. 특히 진단 입원 수술로 대표되는 생존보장에 대한 사차 Risk 및 사차손의 급증이나 역선택 증가는 보험사의 경영수지 악화를 유발하여 보험산업 전반에 위험으로 작용할 수도 있다. 따라서, 장기적인 안목으로 업계 공동의 대응이 필요하고, 각 사에서도 상품개발, 언더라이팅, 지급심사 간의 긴밀한 협조가 요구된다. 생명보험산업의 Risk 관리는 기존의 시장환경에 영향을 받는 비차, 이차중심에서 보험회사가 어느 정도 관리를 통해 적정규모를 유지할 수 있는 사차로 그 중심축이 이동하고 있다. 보험산업이 계속 활력을 갖고 성장하기 위해서는 체계적인 Risk나 관리가 핵심일 것이며, 보험사의 사차 Risk의 중요성이 더욱 커져 가고 있는 현실에서 거시적으로 의학신기술 발달 등 위험요인에 대해 미리 분석하고 이에 대한 대비책 마련이 필요할 것으로 판단된다.

• The Journal of the Korea Contents Association
• /
• v.16 no.11
• /
• pp.116-127
• /
• 2016

The instructional consulting has emerged as an important teaching development program in university. So, this research aims to analyze the instructional consultation system in centers for teaching and learning in four-year-course universities and deduce implications from it. To this end, focusing on instruction consulting program types, status, and example cases for promotion, homepages were reviewed and phone interview was conducted from July to August, 2015. The results were as follows. First, 9 types of instruction consulting system in universities were found. Second, the status of offering the programs and implementing them did not correspond to each other. Third, universities were mainly using in-school consultants. Fourth, universities had various ways of using the results and reward systems. Lastly, as for the example cases, through various consulting programs, consultant pools, use of results and reward system, and connection with other programs, it was found that instruction consulting system was operated organically. The implications that the research result offers are as follows. First, there should be accurate diagnosis of instructors and customized consulting systems based on needs. Second, there should be supports inside schools and cooperation between external organizations that can help raise consulting teams of various backgrounds. Third, the instructional consulting should be made through joint considerations and reflections of instructors. Fourth, universities should provide systematical support for instructional consultation and have higher awareness about it.

• Resources Recycling
• /
• v.9 no.1
• /
• pp.36-43
• /
• 2000

This study was carried out for treatment and reuse of inorganic sludge from Fenton process at B dyeing wastewater treatment plant. The parameters for pilot-scale treatment system were derived from the results of this study. It was found that $COD_{cl}$ of the treated effluent became lower than 100 mg/l approximately on the optimal reaction condition. 2nd sludge which was generated after redissolving sludge was analyzed, and it showed that reduction ratio of ash in 2nd sludge and total dry sludge weight in comparison with current sludge were 85% and 65%. Also Fe salt in sludge was redissolved about 90~95% of initial Fe by weight. It was estimated almost ￦350,000,000 for sludge reuse process. It was estimated saving of about ￦1,300,000 per day (￦420,000,000 per year) in operating cost based on 30,000 $m^3$/d treatment, which these were about ￦430,000 per day in chemical, ￦1,100,000 per day in sludge transportation and ￦200,000 per day in equipment maintenance. Payback period with interest charge for investment cost was estimated about 10.5 months. Also, net present value (NPV) was ￦792,000,000 and internal rat of return (IRR) was about 110%.