• 한국해양학회지
• /
• v.29 no.4
• /
• pp.392-401
• /
• 1994

We examined the temporal characteristics of the oceanic eddy diffusion at 5 coastal regions of Korea by measuring the separation distances of multiple drifters released simultaneously at the same by the GPS and Decca transponder system. The observed variance of separation distance, for the time scales from minutes to hours, is proportional to t/SUP m/ with scaling exponent m between 1.2 and 2.0. The observed Lagrangian trajectories of drifters show fractal characteristics instead of random walk or Brown motion. As an effort toward a development of a realistic model of the oceanic eddy diffusion, we simulated the Lagrangian trajectories of drifters by fractional Brown motion (FBM) model. The observed variances of drifter separations can be generated by the FBM process provided the Hurst exponent is the same as the observed one. We further showed that the observed power law in the variance of drifter separations cannot be simulated with an ordinary Brown motion or random walk process.

• Journal of agriculture & life science
• /
• v.46 no.1
• /
• pp.91-103
• /
• 2012

The aim of this study was to develop a rapid and cheap bioassay of four lignans (schisandrin, schisandrin C, the gomisin A and gomisin N) isolated from Schizandra chinensis Baill on seed germination and seedling growth of the radish. Its structure was determined by analysis of MS and NMR spectroscopic data. Radish seeds immersed for 1 hr in the solutions of $10^{-5}M$, $10^{-6}M$ and $10^{-7}M$ of schisandrin, schisandrin C, gomisin A, and gomisin N, seed germination was observed with in 60 hr after all of the treatments. Also, the seeds were germinated faster compared to untreated controls. At early germination stage, 48 hr after the treatment of the lignans, the suppression of germination was observed from all treatments; the suppression due to schisandrin and gomisin A was the highest at the concentration of $10^{-6}M$. The level of suppression increased as the concentration increased in the treatment of schisandrin C and gomisin N. Percent germination of seed after 184 hr was increased 90% at all treatments. For the effects of lignan treatment on seedling growth in radish, the growth of hypocotyl was promoted by gomisin A and gomisin N at all concentrations. Root elongation was significantly promoted by schisandrin and gomisin N at $10^{-5}M$ and $10^{-6}M$, respectively. Fresh and dry weights of the seedlings were high at a low concentration of $10^{-7}M$, but significantly reduced by schisandrin C at a high concentration of $10^{-5}M$. The results of the germination activity and seedling growth of the lignans from S. chinensis suggest their potential use as natural growth regulators.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.12
• /
• pp.837-842
• /
• 2014

A computer program is developed for the prediction of NO generation by the addition of water moisture and water electrolysis gas in LNG-fired turbulent reacting flow. This study is the first part to deal with the moisture effect on NO generation. In this study, parametric investigation has been made in order to see the reduction of thermal NO as a function of amount of moisture content in a LNG-fired flame together with the swirl and radiation effect. First of all, calculation results show that the flame separation together with the NO concentration separation are observed by the typical flow separation due to strong swirl flow. With a fixed amount of air, the increased amount of water moisture from 0 to 10% by 2% interval shows the decrease of NO concentration and flame temperature at exit are from $973^{\circ}C$ and 139 ppm to $852^{\circ}C$ and 71 ppm. The radiation effects on the generation on NO appears more dominant than swirl strength over the range employed in this study. However, for the strong swirl flow employed in this study, the flow separation cause the relatively high NO concentration observed near exit after peak concentration in the front side of the combustor.

• Journal of computational fluids engineering
• /
• v.4 no.2
• /
• pp.57-66
• /
• 1999

Numerical Analysis has been done for the supersonic off-design jet flow due to the pressure difference between the jet and the ambient fluid. The difference of pressure generates an oblique shock or an expansion wave at the nozzle exit. The waves reflect repeatedly on the center axis and the sonic surface in the shear layer. The pressure difference is resolved across these reflected waves. In this paper, the axi-symmetric Navier-Stokes equation has been used with the κ-ε turbulence model. The second order TVD scheme with flux limiters, based on the flux vector split with the smooth eigenvalue split, has been used to capture internal shocks and other discontinuities. Numerical calculations have been done to analyze the off-design jet flow due to the pressure difference. The variation of pressure along the flow axis is compared with an experimental result and other numerical result. The characteristics of the interaction between the shock cell and the turbulence mixing layer have been analyzed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.13 no.2
• /
• pp.109-121
• /
• 2001

This paper describes results of an experimental study to examine the effect of a submerged horizontal breakwater to sea water exchange. Flow measurements were taken by using a PIV(Particie Image Velocimetry) system, and mean currents and wave ellipses extracted through the harmonic analysis are presented. As results, the rates of circulating flow were closely connected with the volume flux of incident waves and the counter-rotating vortex pair was observed at the onshore side of a plate. The dye study showed that incoming sea water and polluted water body mixed up significantly due to turbulent motions induced by a jet-like flow.

• 한국해양학회지
• /
• v.24 no.1
• /
• pp.29-38
• /
• 1989

It has been believed that the circulation in the Japan Sea involves separation of current from the Korean coast and formation of a cold cyclonic gyre in the north. To explain this, a simple quasi-geostrophic linear model is considered. The model is basically of an inflow-outflow system. The local forcings, wind and air-sea heat exchange together with damping (both mechanical and thermal), are imposed upon. The results show that only the buoyancy damping due to perturbations from local thermal adjustment can cause the separation and the gyre. Various types of circulation patterns are possible depending on the intensity of the thermal forcing.

• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.201-213
• /
• 2017

Water is removed from crude oil containing water by using oil separator. This study aims to develop a three-dimensional (3D) Eulerian computational fluid dynamics (CFD) model to predict the separation efficiency of air-water-oil separator. In the incompressible, isothermal and unsteady-state CFD model, air is defined as continuous phase, and water and oil are given as dispersed phase. The momentum equation includes the drag force, lift force and resistance force of porous media. The standard k-${\varepsilon}$ model is used for turbulence flow. The exit pressures of water and oil play an important role in determining the liquid level of the oil separator. The exit pressures were identified to be 6.3 kPa and 5.1 kPa for water and oil, respectively, to keep a liquid level of 25 cm at a normal operating condition. The time evolution of volume fractions of air, water and oil was investigated. The settling velocities of water and oil along the longitudinal separator distance were analyzed, when the oil separator reached a steady-state. The oil separation efficiency obtained from the CFD model was 99.85%, which agreed well with experimental data. The relatively simple CFD model can be used for the modification of oil separator structure and finding optimal operating conditions.

• Fire Science and Engineering
• /
• v.29 no.5
• /
• pp.42-50
• /
• 2015

Three simulation approaches for turbulence were applied for the computation of propane dispersion in a simplified real-scale urban area with one building:, Large Eddy Simulation (LES), Detached Eddy Simulation (DES), and Unsteady Reynolds Averaged Navier-Stokes (RANS). The computations were performed using FLUENT 14, and the grid system was made with ICEM-CFD. The propane distribution depended on the prediction performance of the three simulation approaches for the eddy structure around the building. LES and DES showed relatively similar results for the eddy structure and propane distribution, while the RANS prediction of the propane distribution was unrealistic. RANS was found to be inappropriate for computation of the gas dispersion process due to poor prediction performance for the unsteady turbulence. Considering the computational results and cost, DES is believed to be the optimal choice for computation of the gas dispersion in a real-scale space.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.2
• /
• pp.91-107
• /
• 1992

A numerical formulation is developed to solve the linear three-dimensional hydrodynamic equations which describes wind induced flows in a homogeneous shelf sea. The hydmdynamic equations are at the outset separated into two systems. namely, an equation containing the gradient of sea surface elevation and the mean flow (external mode) and an equation describing the deviation from the mean flow (internal mode). The Galerkin method is then applied to the internal mode equation. The eigenvalues are determined from the eigenvalue problem involving the vertical eddy viscosity subject to a homogeneous boundary condition at the surface and a sheared boundary condition at the sea bed. The model is tested in a one-dimensional channel with uniform depth under a steady, uniform wind. The analytical velocity profile by Cooper and Pearce (1977) using a constant vertical eddy viscosity in channels of infinite and finite length is chosen as a benchmark solution. The model is also tested in a homogeneous, rectangular basin with constant depth under a steady, uniform wind field (the Heaps' Basin of the North Sea scale).

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.4
• /
• pp.67-74
• /
• 1999

Problems created by supersonic jet impinging on solid objects or ground arise in a variety of situations. For example multi-stage rocket separation, deep-space docking, V/STOL aircraft, jet-engine exhaust, gas-turbine blade, terrestrial rocket launch, and so on. These impinging jet flows generally contain a complex structures. (mixed subsonic and supersonic regions, interacting shocks and expansion waves, regions of turbulent shear layer) This paper describes experimental works on the phenomena (surface pressure distribution, flow visualization) when underexpanded supersonic jets impinge on the perpendicular, inclined plate using a supersonic cold-(low system. The used supersonic nozzle is convergent-divergent type, exit Mach number 2, The maximum on the plate when it was inclined was much larger than perpendicular plate, owing to high pressure recoveries through multiple shocks. Surface pressure distribution as to underexpanded ratio showed similar patterns together.