• Journal of Korean Elementary Science Education
• /
• v.30 no.2
• /
• pp.129-140
• /
• 2011

As one of the casting plans to improve the scientific inquiry ability of the students, the aims of this study are to develop and apply a basic inquiry program for the inquiry subject of Seogwipo fossil formation, and analyze the basis inquiry ability of the students to show in the inquiry activity process actually. The results obtained in 5th grade 48 elementary school students of Seogwipo-city are as follows; Students executed observing activity using an appropriate senses such as senses of vision and touch, and showed the tendency which tries to observe the form overall rather than the partial form of the fossil formation. But the ability to utilize appropriately for predicting and inferring with the facts which could depend on observing activity was low. And we found out that the misconceptions influence on inquiry activity. Therefore, to help understanding deeper for the students' basic inquiry element, it is thought that a study of the various educational guidance ways is necessary to this. The teachers also have to study the various ways to induce the scientific conception through the application of proper teaching-learning for correction of misconceptions because misconceptions have an influence on inquiry activity together. If various inquiry programs considering the regional-specific characteristics are developed to cause students' interest, students would come to participate in inquiry activity aggressively a little more.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.4
• /
• pp.579-588
• /
• 1997

The heat transfer and flow measurements from a convex curved surface to a circular impinging jet have been made. The flow at the nozzle exit has a fully developed velocity profile. The jet Reynolds number (Re) ranges from 11,000 to 50,000, the dimensionless nozzle-to-surface distance (L/d) from 2 to 10, and the dimensionless surface curvature (d/D) from 0.034 to 0.089. The results show that the stagnation point Nusselt number (N $u_{st}$ ) increases with increasing value of d/D. The maximum Nusselt number at the stagnation point occurs at L/d .ident. 6 to 8 for all Re's and d/D's tested. For larger L/d, N $u_{st}$ dependency on Re is stronger due to an increase of turbulence in the approaching jet as a result of the more active exchange of momentum with a surrounding air. The local Nusselt number decreases monotonically from its maximum value at the stagnation point. However, for L/d=2 and Re=23,000, and for L/d.leq.4 and Re=50,000, the stream wise Nusselt number distributions exhibit secondary maxima at r/d .ident. 2.2. The formation of the secondary maxima is attributed to an increase in the turbulence level resulting from the transition from a laminar to a turbulent boundary layer.ndary layer.

• Journal of Korean Society for Geospatial Information Science
• /
• v.21 no.2
• /
• pp.117-123
• /
• 2013

This study focuses on the determination of optimal photographing angle and overlapping ratio for automatic image stitching system using a non-metric camera module with motorized head. Photographing overlap was calculated considering the angle of view on different kinds of lenses and moving angle of motorized head per each option, and optimal photographing angle and overlapping ratio could be determined through the experimental result using the operating time, data volume and performance of image stitching. Through this experiment, we could find that it was effective to take a picture with $36^{\circ}$ of interval(33.82% of overlap) in vertical direction and $24^{\circ}$ or $30^{\circ}$ of interval(36.51% or 20.63% of overlap) in horizontal direction using 35mm lens for automatic image stitching system.

• Korean Journal of Human Ecology
• /
• v.18 no.6
• /
• pp.1315-1321
• /
• 2009

The chemical composition of natural powder dye $Pinux^{TM}$ manufactured from Pinus radiata bark and dyeability of dyed silk fabrics with $Pinux^{TM}$ were examined. It is made up of the optimum dyeing condition of silk fabric according to the dyeing concentration, dyeing time, and dyeing temperature. Also, we examined the colorfastness and antibiosis of dyed silk fabrics to washing, rubbing, perspiration and light. For the analysis of the chemical composition of $Pinux^{TM}$, the total contents of phenolic compound, proanthocyanidin(PA) and anti-oxidative activities of the dye were analyzed. As a result, it was found that the main components of the $Pinux^{TM}$ manufactured from Pinus radiata bark is proanthocyanidin, mostly a flavonoid containing a procyanidin structure, and it consists of approximately 63% phenol. As a result of examining the dyeability of silk fabrics with $Pinux^{TM}$, it showed that the dyeability was best under the conditions of the concentration of dye $1{\sim}1.5%$(wt/v%), dyeing time of 90 minutes, and dyeing temperature at $90^{\circ}C$. It was found that the colorfastness of dyed silk fabrics, colorfastness to washing, perspiration for acidic and rubbing were as good as grade 4 or 4-5. However, the colorfastness to light was low at grade 1, the same as the results of other natural dyed fabrics. As a result of the antibiosis measurement for the $Pinux^{TM}$-dyed silk fabrics, it showed high antibacterial properties to Staphylococcus sureus at 99.6%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.445.2-445.2
• /
• 2014

표면 조직화의 목적은 태양전지 표면에서의 입사되는 빛의 반사율을 감소 시키고, 웨이퍼 내에서 빛의 통과 길이를 길게 하며, 흡수되는 빛의 양을 증가시키는 것이다. 본 연구에서는 여러 가지 표면 조직화 공정 기술을 이용하여 표면 형상에 따른 광 변환 효율에 대해 연구하였으며, 셀을 제작하여 전기적 특성과 광학적 특성의 상관관계를 분석하였다. KOH를 이용한 표면 조직화, 산 증기를 이용한 표면 조직화, 반응성 이온 식각을 이용한 표면 조직화, 금속 촉매 반응을 이용한 표면 조직화 공정 기술을 이용하여 표면 조직화 공정을 진행하였다. 셀 제작 결과, 반사도 결과와는 상반되는 결과를 얻을 수 있었다. 표면 조직화 형상에 따른 셀 효율의 변화는 도핑 프로파일과 표면 재결합 속도의 변화 때문이라 생각되며 더 명확한 분석을 위해 양자 효율을 측정하여 분석을 시도하였다. 표면 조직화 공정 기술별 도핑 프로파일을 보면 KOH를 이용한 표면 조직화 공정을 제외한 나머지 표면 조직화 공정들의 도핑 프로파일은 불균일하게 형성되어 있는 것을 확인 할 수 있다. 양자 효율 측정 결과 단파장 대역에서 낮은 응답특성을 가지는 것을 확인 할 수 있었다. 그 이유는 낮은 반사도를 가지는 표면 조직화 공정의 경우 나노사이즈의 구조를 갖기 때문에 균일한 도핑 프로파일을 얻지 못해 전자, 정공의 분리가 제대로 이루어지지 못하였고 표면 재결합 속도증가의 원인으로 단락전류와 개방전압이 낮아져 효율이 떨어진 것으로 판단된다. 결과적으로 낮은 반사율을 갖는 표면 조직화 공정도 중요하지만 표면 조직화 공정 기술에 따른 균일한 도핑 프로파일을 갖는 공정을 개발한다면 단파장 응답도가 향상되어 단락전류밀도와 개방전압 상승효과를 얻을 수 있을 것이라 판단된다.

• Korean Journal of Materials Research
• /
• v.27 no.2
• /
• pp.100-106
• /
• 2017

Nanosized and aggregated $Y_2O_3:Eu$ Red phosphors were prepared by template method from metal salt impregnated into crystalline cellulose. The particle size and photoluminescent property of $Y_2O_3:Eu$ red phosphors were controlled by variation of the calcination temperature and time. Dispersed nanosol was also obtained from the aggregated $Y_2O_3:Eu$ Red phosphor under bead mill wet process. The dispersion property of the $Y_2O_3:Eu$ nanosol was optimized by controlling the bead size, bead content ratio and milling time. The median particle size ($D_{50}$) of $Y_2O_3:Eu$ nanosol was found to be around 100 nm, and to be below 90 nm after centrifuging. In spite of the low photoluminescent properties of $Y_2O_3:Eu$ nanosol, it was observed that the photoluminescent property recovered after re-calcination. The dispersion and photoluminescent properties of $Y_2O_3:Eu$ nanosol were investigated using a particle size analyzer, FE-SEM, and a fluorescence spectrometer.

• Korean Journal of Materials Research
• /
• v.27 no.10
• /
• pp.534-543
• /
• 2017

$Gd_2O_3:Eu^{3+}$ red phosphors were prepared by template method from crystalline cellulose impregnated by metal salt. The crystallite size and photoluminescence(PL) property of $Gd_2O_3:Eu^{3+}$ red phosphors were controlled by varying the calcination temperature and $Eu^{3+}$ mol ratio. The nano dispersion of $Gd_2O_3:Eu^{3+}$ was also conducted with a bead mill wet process. Dependent on the time of bead milling, $Gd_2O_3:Eu^{3+}$ nanosol of around 100 nm (median particle size : $D_{50}$) was produced. As the bead milling process proceeded, the luminescent efficiency decreased due to the low crystallinity of the $Gd_2O_3:Eu^{3+}$ nanoparticles. In spite of the low PL property of $Gd_2O_3:Eu^{3+}$ nanosol, it was observed that the photoluminescent property was recovered after re-calcination. In addition, in the dispersed nanosol treated at $85^{\circ}C$, a self assembly phenomenon between particles appeared, and the particles changed from spherical to rod-shaped. These results indicate that particle growth occurs due to mutual assembly of $Gd(OH)_3$ particles, which is the hydration of $Gd_2O_3$ particles, in aqueous solvent at $85^{\circ}C$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.10
• /
• pp.4543-4549
• /
• 2011

In this study, software products developed in the course of testing, software managers in the process of testing software test and test tools for effective learning effects perspective has been studied using the NHPP software. The Burr distribution applied to distribution was based on finite failure NHPP. Software error detection techniques known in advance, but influencing factors for considering the errors found automatically and learning factors, by prior experience, to find precisely the error factor setting up the testing manager are presented comparing the problem. As a result, the learning factor is greater than automatic error that is generally efficient model could be confirmed. This paper, a numerical example of applying using time between failures and parameter estimation using maximum likelihood estimation method, after the efficiency of the data through trend analysis model selection were efficient using the mean square error and $R^2$.

• The Korean Journal of Physiology
• /
• v.3 no.2
• /
• pp.1-7
• /
• 1969

Physiological analysis of swimming in 13 (age:16.3 years, freestyle swimming) and 15 (age:17.2 years, breast stroke swimming) high school boys through oxygen uptake and oxygen debt measurements were performed. The following results were obtained. 1. In freestyle swimming oxygen debt was greater and mechanical efficiency was lower in subjects with less speed. In beginner efficiency was only 1.35%, whereas, in a more skilled subject it ranged to 4.28%. The mean efficiency was 2.59%. 2. In freestyle swimming the speed-oxygen debt curve was convex to the speed axis and the curve shifted to the right the more the speed was greater. 3. Maximal oxygen uptake in breast stroke swimming was 2.51 l/min or 41.8 ml/kin/kg and was 79.3% of treadmill running. Maximal pulmonary ventilation in breast stroke swimming was 73.1 l/min and was 87% of treadmill running. Maximal ventilation equivalent was 2.89 liters. 4. In subjects with greater speed of breast stroke swimming maximal oxygen uptake and mechanical efficiency of swimming were greater. The mechanical efficiency of breast stroke swimming averaged 1.08% $(range:0.51{\sim}1.70%)$. The coefficient of correlation between speed and efficiency was r=.87.

• Journal of Powder Materials
• /
• v.24 no.6
• /
• pp.457-463
• /
• 2017

Nanosized $Gd_2O_3:Eu^{3+}$ red phosphor is prepared using a template method from metal salt impregnated into a crystalline cellulose and is dispersed using a bead mill wet process. The driving force of the surface coating between $Gd_2O_3:Eu^{3+}$ and mica is induced by the Coulomb force. The red phosphor nanosol is effectively coated on mica flakes by the electrostatic interaction between positively charged $Gd_2O_3:Eu^{3+}$ and negatively charged mica above pH 6. To prepare $Gd_2O_3:Eu^{3+}$-coated mica ($Gd_2O_3:Eu/mica$), the coating conditions are optimized, including the stirring temperature, pH, calcination temperature, and coating amount (wt%) of $Gd_2O_3:Eu^{3+}$. In spite of the low luminescence of the $Gd_2O_3:Eu/mica$, the luminescent property is recovered after calcination above $600^{\circ}C$ and is enhanced by increasing the $Gd_2O_3:Eu^{3+}$ coating amount. The $Gd_2O_3:Eu/mica$ is characterized using X-ray diffraction, field emission scanning electron microscopy, zeta potential measurements, and fluorescence spectrometer analysis.