• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.64-73
• /
• 2010

This research collected some multi-image information of Nakdong River Estuary Eulsukdo area in last 30 years, which are used as the basis information in running the qualitative analysis of the topography relief's deformation. First, to obtain the data, this research carried out a field survey and GCP measurement, then classified and collected the image information by analog and digital image. The acquired images which have passed a high-precise scan process and geometric correction is manufactured by Ortho Mosaic image, then divided them into 9 sections time period classification before we run a qualitative analysis. In late of 1980's there are many changes of environmental topography deformation of the Eulsukdo area which caused by large scale building constructions, appeared to be known through this research. And then in late of 1990's, we organized the wild cultivated lands, started the wetland restoration of the artificial ecology, in 2000's we are able to know the existence of topograph relief change which caused by big scale of bridge construction. Hereafter, in this quick process of the environmental and topographical change of this area caused by the 4 major rivers restoration project, the analysis results of this experiment are expected to be something applicable as important basic data.

• The korean journal of orthodontics
• /
• v.3 no.1
• /
• pp.7-13
• /
• 1972

Many geometric curves are presented as representative form of normal dental arches by many authors; circle, ellipse, parabola or catenary curve. Among them those except circle seems difficult to be adopted as a guide in ideal arch form construction and practically many orthodontists chose circle as a standard. Author preferred circle of Bonwill's theory in study of anterior teeth alignment of Korean adults. Eighty three dental models which possess proper occlusion and good arch form were selected and copies of their occlusal surfaces obtained by Ricopy machine. The use of Ricopy machine made it possible to draw arch form exactly. Mesiodistal widths of six anterior teeth were measured and they were added to combined mesiodistal width of six anterior teeth. Circle, that include the points of two cuspal tips of canines and one incisal edge of central incisor were drawn. Distances of lateral incisors that are deviated from arc of this circle were measured and classified into four grades by degree and three groups by kind of teeth deviated. By counting the number of samples involved degree of fit of the circle to arch contour of Korean adult was described. Then, size of radius of circle, intercanine width and intermolar width were measured and evaluated their ratios to combined mesiodistal width of six anterior teeth. In normal occlusion of Korean adult anterior teeth seems to be arranged on an arc of circle the radius of which is similar to combined mesiodistal width of six anterior teeth. Intercanine width and intermolar width have rather constant ratios to combined width of six anterior teeth.

• The korean journal of orthodontics
• /
• v.36 no.2 s.115
• /
• pp.153-160
• /
• 2006

For orthodontic treatment of growing patients and those which involve long treatment times, knowledge of growth and development are essential. Data from the general growth observation chart being used at present does not reflect the growth transition of modern times. This is because these data are out of date. The present study, therefore, aims to introduce the process of producing a growth curve and growth rate curve based on data which represents a more accurate description of the present situation. The data used were from the 5th nationwide surrey, SIZE KOREA 2004 study, carried out by the Technology and Standards Policy Division, Department of Technology and Standards Planning, Ministry of Commerce. Processing and rearranging produced data with variations divided into the three quartiles and the 1st, 5th, 95th and 99th percentiles were included to produce a growth observation chart according to sex, height and weight differences. In the same way, a growth rate curve based on the geometric mean value was produced. The resulting growth charts can be used as an index for growth and development, and used for better communication between the orthodontist, patients and parents.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.19-31
• /
• 2007

When estimating the benefits from an investment project in the transportation sector, errors caused by many factors may exist. This study focuses on user equilibrium traffic assignment methods and stopping criteria. According to previous studies, when using a user equilibrium assignment model, the benefits of travel time savings can be effected by the relative gap value. As the stopping criteria decreases, the time needed for traffic assignment increases, so that lowering the criteria cannot be the best solution. Therefore, an effort is necessary to reduce this change rate and thus improve reliability. This paper considers three methods: reducing the links subject to benefit calculation, extracting sub-area O/D tables and networks, and applying the mean value of successive traffic assignment results. The results of the analysis show that the method using the mean value of five results is more proper than the other methods. Using the sub-area analysis method, if the study area is small the benefits of a project might be over- or under-estimated. This paper used a nationwide O/D table and network at peak time as a case study. The resulting patterns can differ according to basic data to be used in analysis. So further analysis using the data from metropolitan areas are needed.

• Journal of the Mineralogical Society of Korea
• /
• v.15 no.3
• /
• pp.195-204
• /
• 2002

Mineralogy and the exposed surface area are two of the most important factors controlling dissolution and weathering rates of soils. The mixture of inorganic and organic materials of various size distributions and structures that constitute soils makes the calculation of weathering rates difficult. The surface area of soil minerals plays an important role in most of programs for calculating the weathering rates and critical loads. The Brunauer-Emmett-Teller (BET) measurement is recommended for the measurement of specific surface area. However, BET values measured without organic matter removal are in fact those far all the N2-adsorbed surface areas, including the surfaces covered and aggregated with organisms. Surfaces occupied by organisms are assumed to be more reactive to weathering by organic activities. Therefore, the BET surface area difference before and after organic removal depicts the area occupied by organisms. The present study shows that the BET values after organic matter removal using $H_2$O$_2$ are larger than those without removal by 1.68~4.87 $m^2$/g. This implies that BET measurement without organic removal excludes the reactive area occupied by organisms and that the area occupied by organisms in soils is much larger than expected. It is suggested that specific surface area measurement for calculating weathering rates of mineral soils should be made before and after organic matter removal. The results of a column experiment are presented to demonstrate the potential retarding influence that this organic matter may have on mineral dissolution and weathering.

• Journal of Navigation and Port Research
• /
• v.32 no.8
• /
• pp.637-643
• /
• 2008

When planning outfall system, the first target cif design is to maximize initial dilution of discharge effluent. To achieve the target effectively, the characteristics of mixing phenomenon between ambient and discharged water should be analyzed. Especially the analysis at the Near-Field-Region(NFR) as initial dilution zone should be preceded. Usually, the initial behavior of effluent through outfall system is rising toward the surface due to mixing with ambient water for heat discharge and sinking toward the bottom due to the difference of density for brine discharge. After mixed with eddies accompanied by the ambient water, the plumes are showing the same density and internal current pattern by advection and diffusion. Until recently, lots of studies are being carried out for the optimum design of outfall system. but it is difficult to find any studies of heat and brine discharge at the same time. Therefore, this study is hoped to provide some basic data for optimum design of outfall system.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.3
• /
• pp.1-15
• /
• 1999

This study was carried out to find out the way to build a comprehensive wetland ecosystem database using the technique of remote sensing and geographic information system. A Landsat TM image taken in May 17, 1997 was used for the primary source for the image analysis. Field surveys were conducted March to September of 1998 to help image analysis and examine the results. An actual wetland vegetation map was created based on the field survey. A Landsat TM image was analyzed by unsupervised and supervised classification methods and finally categorized into such 5 classes as Phragmites australis community, mixed community, sand beach, Scirpus trigueter community and non-vegetation intertidal area. Wetland basemap was developed for the overall accuracy assesment in wetland mapping. Vegetation index map of wetland vegetation was developed using NDVI(normalized difference vegetation index). The map of wetland productivity was developed based on the productivity of Phragmites australis and the relationship to the proximity of adjacent water bodies. The map of potential vegetation succession map was also developed based on the experience and knowledge of the field biologists. Considering these results, it is possible to use the remote sensing and GIS techniques for producing wetland ecosystem database. This study indicated that these techniques are very effective for the development of the national wetland inventory in Korea.

• Journal of Korean Society for Geospatial Information Science
• /
• v.11 no.3 s.26
• /
• pp.23-34
• /
• 2003

Currently, the efficiency of GPS has been increased in the various precise survey like as the control survey and the navigation etc. Also, it is widely used in the deformation analysis of the structure, the measurement of the marine tides, the measurement of the river level and the topographic monitoring of seabed or riverbed by combined the measurement equipment for depth. In this study, we intend to increase in efficiency of the topographic monitoring of seabed or riverbed by combined with DGPS, RTK GPS and echo sounder. For this study, we defined the error correction of the echo sounder with the experiment of water tank which is considered the characteristic of estuary riverbed and then we developed the s/w for 3-dimensional monitoring of estuary riverbed and applied the s/w to field test and improved the various problems. On analyzing topography of estuary riverbed by combined GPS with echo sounder, the draught error which is yielded to change of length from the water surface by the movement of survey vessel to the end of the transducer was eliminated by geometrical rearrangement and we defined the correction formula $z=BM+SAH-DBR_{(i)}-DRT-ED$. The sounding error about the echo sounder and characteristic of estuary riverbed was found by understanding the relation of average diameter ind residual error and we defined correction formula, $Y=0.00474{\ast}ln(X)-0.0045$ by the regression analysis. and then we verified applicability of correction formula.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.4
• /
• pp.253-262
• /
• 2006

In this paper, collision analysis is carried out between two FRP fishing boats. A computer simulation with finite element method is used to accomplish this objective. At first, a detailed geometric model of the boat is constructed using 3-D CAD program. The formation of a finite element from a geometric data of the boats is carried out using HYPERMESH that is the commercial software for mesh generation and post processing. Twelve collision configurations are established by combining two kinds of contact angle($90^{\circ},\;135^{\circ}$) and three different speed(5, 10, 15knot) for small and large boats. Collision analysis is accomplished using DYNA3D. Stress distribution and deformation shape are investigated for each collision condition. In general, $90^{\circ}$ collision angle generate larger stress than $135^{\circ}$ case and the collision for two moving boats showed larger maximum stress than the case that one is moving and the other is stationary. When analysis is carried out until 150ms contact parts of two boats are broken for 10 and 15knot collision speed, in which maximum stress is larger than ultimate strength of the material.

• Journal of Korean Society for Geospatial Information Science
• /
• v.24 no.3
• /
• pp.49-58
• /
• 2016

Applications of drone in various fields have been increasing in recent years. Drone has great potential for forest management. Therefore this paper is using drone for forest damage areas. Forest damage areas is divided into caused by anthropogenic and occurs naturally, the possibility of disasters, such as slope sliding, slope failures and landslides, sediment runoff exists. Therefore, this research was to utilize the drone photogrammetry to perform the damage analysis of forest damage areas. Geometrical treatment processing results in Drone Photogrammetry, the plane position error RMSE was ${\pm}0.034m$, the elevation error RMSE was ${\pm}0.017m$. The plane position error of orthophoto RMSE was ${\pm}0.083m$, the elevation error of digital elevation model RMSE was ${\pm}0.085m$. In addition, It was possible to current state analysis of damage in forest damage areas of airborne LiDAR data of before forest damage and drone photogrammetry data of after forest damage. and application of drone photogrammetry for production base data for restoration and design in forest damage areas.