• Transactions of the KSME C: Technology and Education
• /
• v.1 no.1
• /
• pp.129-138
• /
• 2013

Constant airflow should be kept in order to operate a constant-fired boiler of thermal power plants. Main Bearing Assembly Unit which rotates the ventilation fan does very important role to maintain constant airflow. However, the demand to the output of power is getting increased while the quality level of coal is getting worse than the initial level of design criteria. Especially cost wise operation considering increasing output and the difficulty to supply good quality coal drive increasing supply of low quality coal. As a result, the service life of Main Bearing Assembly is getting shorter till 2~3 years which is just a half of the life of original design. In this study, what causes to shorten the service life of Main Bearing Assembly Unit is analyzed through the reverse engineering and analysis and how to improve the service life more than two times to current situation is explained.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.3
• /
• pp.527-535
• /
• 2016

Statistical optimization algorithms have been variously developed to estimate the 3D shape and motion. However, statistical approaches are limited to analyze the sensitive effects of SfM(Shape from Motion) according to the camera's geometrical position or viewing angles and so on. This paper propose the quantitative estimation method about the uncertainties of an observation matrix by using camera imaging configuration factors predict the reconstruction ambiguities in SfM. This is a very efficient method to predict the final reconstruction performance of SfM algorithm. Moreover, the important point is that our method show how to derive the active guidelines in order to set the camera imaging configurations which can be expected to lead the reasonable reconstruction results. The experimental results verify the quantitative estimates of an observation matrix by using camera imaging configurations and confirm the effectiveness of our algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.6
• /
• pp.1323-1330
• /
• 2010

The amount of acoustic data gathered from the acoustic data gathering system is increased dramatically as the acoustic data gathering system become various and highly effective. It is needed to transmit this acoustic data to analysis environment for precise analysis. In this gathering/analysis system, it is also needed the stable transmitting as well as highly perfect security. But the existing system using the conveying method needs a lot of time. In case of using networks, the low speed networking vulnerable in the stable transmitting and the information security is impossible to materialize. In this paper, I would like to propose a transmitting and management system sending a massive gathering acoustic data in the unsecurity and low speed networking environment. The implemented system is to transmit the acoustic data safely in low speed networking environment and secure the acoustic data from various threats.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.1
• /
• pp.51-64
• /
• 2000

This paper presents a procedure of calculating a safety factor of the unsaturated slope suffering from the rainfall infiltration. The process of infiltration into a slope due to rainfall and its effect on the behavior of the soil slope are examined by using a two dimensional finite element flow-deformation coupled analysis. A factor of safety is calculated at various elapsed times after the commencement of rainfall as in the following procedure. First, stresses are estimated at each Gaussian point from the coupled finite element analysis. Then, the global stress smoothing method is applied to get a continuous stress field. Based on this stress field, a factor of safety is calculated for a specified slip surface by a stress integration scheme. Then, a search strategy is used to find out a critical slip surface which is associated with the minimum factor of safety. Some numerical examples are analyzed in order to study the effect of hydraulic conductivity on the slope stability during rain-induced infiltration. According to the results, local failure zone can be formed near the slope surface due to inhomogeneous distribution of hydraulic conductivity If the failure zone is once formed, then the region extends until a large amount of slide activates. Therefore the local failure can be neglected no longer in the stability analysis.

• Journal of Broadcast Engineering
• /
• v.13 no.6
• /
• pp.859-874
• /
• 2008

In this paper, we develop a fast view synthesis method that generates multiple intermediate views in real-time for the 3D display system when the camera geometry and depth map of reference views are given in advance. The proposed method achieves faster view synthesis than previous approaches in GPU by processing in parallel the entire computations required for the view synthesis. Specifically, we use $CUDA^{TM}$ (by NVIDIA) to control GPU device. For increasing the processing speed, we adapted all the processes for the view synthesis to single instruction multiple data (SIMD) structure that is a main feature of CUDA, maximized the use of the high-speed memories on GPU device, and optimized the implementation. As a result, we could synthesize 9 intermediate view images with the size of 720 by 480 pixels within 0.128 second.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.11
• /
• pp.67-73
• /
• 2010

In this paper, a new face detection method that is more accurate than the conventional methods is proposed. This method utilizes a hybrid of Hausdorff distance based on the geometric similarity between the two sets of points and the LBP distance based on the distribution of local micro texture of an image. The parameters for normalization and the optimal blending factor of the two different metrics were calculated from training sample images. Popularly used face database was used to show that the proposed method is more effective and robust to the variation of the pose, illumination, and back ground than the methods based on the Hausdorff distance or LBP distance. In the particular case, the average error distance between the detected and the true face location was reduced to 47.9% of the result of LBP method, and 22.8% of the result of Hausdorff method.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.11
• /
• pp.1012-1019
• /
• 2015

This paper shows the acceleration of iterative physical optics(IPO) for radar cross section(RCS) by using two techniques effectively. For the analysis of the multiple reflection in the cavity, IPO uses the near field method, unlike shooting and bouncing rays method which uses the geometric optics(GO). However, it is still far slower than physical optics(PO) and it is needed to accelerate the speed of IPO for practical purpose. In order to address this problem, graphic processing unit(GPU) can be applied to reduce calculation time and adaptive iterative physical optics-change rate(AIPO-CR) method is also applicable effectively to optimize iteration for acceleration of calculation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1923-1928
• /
• 2017

This paper is a study on error correction for three-dimensional shape reconstruction based on factorization method. The existing error correction method based on factorization has a limitation of correction because it is optimized globally. Thus in this paper, we propose our new method which can find and correct the only major error influence factor toward three-dimensional reconstructed shape instead of global approach. We define the error-influenced factor in two-dimensional re-projection deviation space and directly control the error components. In addition, it is possible to improve the error correcting performance by recursively applying the above process. This approach has an advantage under noise because it controls the major error components without depending on any geometric information. The performance evaluation of the proposed algorithm is verified by simulation with synthetic and real image sequence to demonstrate noise robustness.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.34 no.5
• /
• pp.553-561
• /
• 2010

A medium-scale helium loop that can simulate a VHTR (very-high-temperature reactor) is now under construction at the Korea Atomic Energy Research Institute. The heaters of the test helium loop electrically heat helium fluid up to $950^{\circ}C$ at pressures of 1 to 9 MPa. To optimize the design specifications of the experimental helium loop, the conjugate heat transfer in the high-temperature helium heater was analyzed by performing a CFD simulation. The analysis results indicate that the maximum temperature does not exceed the allowable limit. It is confirmed that the thermal characteristics of the loop with the given geometry satisfy the design requirements.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.330-331
• /
• 2011

희토류 이온이 첨가된 형광체는 조명, 정보 디스플레이, 태양 에너지 변환 소자에 응용 가능하기 때문에 상당한 주목을 받고 있다. 특히, 결정 입자의 형상과 크기는 산업체 응용에 있어서 중요한 변수 중의 하나이다. 구형의 형광체 입자는 형광층의 광학 및 기하학적 구조를 최적화 시킬 수 있고, 결정 입자의 크기는 양질의 코팅을 위해 필요한 결정 입자의 양에 영향을 미친다. 본 연구에서는, $YVO_4$ 모체 결정에 Eu 이온의 농도를 선택적으로 주입하여 발광 효율이 높은 적색 형광체를 합성하고자 한다. 형광체 분말 시료는 활성체인 Eu의 함량을 0.00, 0.05, 0.10, 0.15, 0.20 mol로 변화시키면서 고상 반응법을 사용하여 합성하였다. 볼밀링 작업을 수행한 후에, 60$^{\circ}C$에서 20시간 건조하였고, 잘게 갈아서 체로 걸러낸 다음에 세라믹 도가니에 넣고 전기로에서 서서히 온도를 승온시켜 500$^{\circ}C$에서 10시간 동안 하소를 실시한 후에 1,100$^{\circ}C$에서 5시간 동안 소결하였다. Eu 이온의 함량비를 변화시켜 합성한 $YVO_4$ : Eu 형광체 분말 시료의 발광 세기의 변화, 결정 구조와 표면 형상을 각각 PL과 PLE, XRD, FE-SEM 장치를 사용하여 측정한 결과들을 종합해 볼 때, Eu 이온의 비가 0.15 mol일때 발광 세기가 최대값을 나타냄을 알 수 있었으며, 더욱 Eu의 함량을 증가시키자 농도 억제 현상에 의하여 발광 세기는 급격히 감소함을 보였다. SEM으로 촬영한 결정 입자의 형상의 경우에, Eu 이온의 함량비가 증가함에 따라 결정 입자들이 더욱 조밀하게 구형에 가까운 형상을 나타냄을 관측할 수 있었다(Fig. 1). 형광체 분말의 형광 스펙트럼의 경우에, 619 nm에 주 피크를 갖는 적색 형광 스펙트럼들이 관측되었으며, Eu 이온의 함량비에 따라 형광 세기는 상당한 의존성을 나타내었다(Fig. 2). Eu 함량에 따른 결정입자의 크기, 형광 세기와 회절 피크의 반치폭 사이의 상관 관계를 제시하고자 한다.