• Title/Summary/Keyword: 기준 면적

Search Result 1,513, Processing Time 0.033 seconds

A Comparative Study on Heating Energy Consumption for Apartment Based on the Annually Strengthened Criteria of Insulation (공동주택 연도별 단열기준 강화에 따른 에너지소요량 비교 연구)

  • Kim, Dae-Won;Chung, Kwang-Seop;Kim, Young-Il;Kim, Sung-Min
    • Journal of Energy Engineering
    • /
    • v.22 no.2
    • /
    • pp.83-89
    • /
    • 2013
  • Energy consumption is closely related to our lives. As Korea has four seasons, heating and cooling system is considered as essential facilities for the residential buildings. Accordingly, the government has continuously strengthened the design criteria to improve energy for new and existing building to save energy. The most important factor in the energy efficiency analysis for apartment is the heat transmission coefficient, and the value is significantly different as the heating energy amount is greatly different according to the window area ratio versus facade area ratio. Therefore, it is time to conduct continuous set-up for goal to enhance efficiency and restriction on window area ratio versus facade area ratio.

Estimation of irrigation water need with climate change in Jeju Island (인위적·자연적 요인에 따른 제주도 농업용수 과부족 전망)

  • Kim, Chul-Gyum;Kim, Nam-Won
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2018.05a
    • /
    • pp.363-363
    • /
    • 2018
  • 본 연구에서는 제주도 지역을 대상으로 현재의 용수공급 보장량을 기준으로 미래 인위적 자연적 요인에 따른 수요량의 변화를 고려하여 농업용수 과부족을 분석하였다. 인위적인 요인으로서 작물재배면적의 변화를 고려하였으며, 자연적인 요인으로서는 기후변화 영향을 고려하였다. 제주도의 유출특성과 지질특성, 물이용 특성 등을 고려하여 유역 물수지 기반의 순물소모량 개념을 활용하여 수요량을 추정하였으며, 농업용수 보장량(공급량)은 "제주특별자치도 농업용수 관리계획(2013-2022)"에서 제시하는 값을 적용하였다. 순물소모량 산정에 필요한 실제증발산량 및 잠재증발산량 등은 유역모형인 SWAT (Soil and Water Assessment Tool)을 이용하여 산정하였다. 인위적인 변화로서 2020년 작물재배면적 추정치를 적용하여 용수 과부족을 분석한 결과, 구좌읍과 성산읍 2개 지역에서 수요량이 보장량을 초과하는 것으로 나타났다. 참고로 기존의 필요수량 개념의 수요량을 적용했을 때에는 제주시 동지역, 구좌읍, 조천읍, 서귀포시 동지역, 성산읍, 표선면, 남원읍, 안덕면, 대정읍 등 9개 지역에서 용수가 부족할 것으로 분석된 바 있다. 미래 기후변화 영향을 고려하기 위하여 IPCC (International Panel on Climate Chnage) CMIP5(the fifth phase of the Coupled Model Intercomparison Project)에서 제시하는 대순환모델 중 9개 모형의 결과를 활용하여 미래(2010~2099년)의 수요량을 산정하고, 앞서 적용한 2020년 재배면적 추정치와 보장량을 기준으로 지역별, 시기별로 농업용수 과부족을 분석하였다. 기후변화 시나리오는 RCP 4.5와 RCP 8.5 결과를 적용하였다. 인위적인 영향에 대한 분석과 마찬가지로 구좌읍과 성산읍을 제외하고는 수요량 대비 보장량이 충분한 것으로 분석되었다. 시나리오에 따른 영향은 RCP 8.5 보다는 RCP 4.5 시나리오에서의 보장률이 상대적으로 높게 나타났으며, 2개 시나리오 모두 미래 후반기로 갈수록 수요량의 증가에 따라 보장률이 점차 감소하는 것으로 나타났다. 다만, 이 분석은 재배면적의 변화가 없이 단순히 기상조건의 변화만을 적용한 전망으로서, 향후 실제 기상여건과 재배면적, 물이용, 용수공급체계, 물관리 정책방향 등의 변화에 따라 좌우될 수 있다.

  • PDF

An Area Efficient Biasing Technique for Low Frequency AG Amplifier (저주파 AC 증폭기에 적합한 면적 효율적인 바이어스 기법)

  • Ryu, Seung-Tak;Hong, Young-Wook;Choi, Bae-Kun;Cho, Gyu-Hyeong
    • Proceedings of the KIEE Conference
    • /
    • 2001.07d
    • /
    • pp.2570-2572
    • /
    • 2001
  • 본 논문에서는 저주파 신호 증폭기에서 DC 이득에 의해 앰프가 포화되는 것을 막기 위해 필요한 큰 커플링 커패시터와 바이어스 저항의 면적을 줄이기 위한 회로를 제안한다. 또한, 이 경우 연산증폭기의 양 입력 단에 연결되는 바이어스 저항과 앰프의 이득을 설정하기 위해 사용되는 저항사이의 큰 값의 차이로 인해 발생하는 오프셋을 줄이기 위해 적절한 기준 전압을 정의하는 방법을 소개한다. 제안된 회로를 사용했을 때, 기존의 저항으로 앰프의 입력단을 바이어스할 때의 한계인 오프셋의 문제를 해결함으로써 보다 최적화된 면적으로 설계가 가능했다. 이 기법을 적외선 리모콘 수신 IC의 앰프에 적용했을 때, 커플링 커패시터와 바이어스 저항으로 설정되는 -3dB 주파수를 3kHz에 설정한 경우, 저항과 커패시터가 차지하던 면적의 12%를 차지했다.

  • PDF

Application Analysis of Radar Polygon Method (Radar Polygon 기법의 적용)

  • Cho, Woonki;Lee, Jaehyeon;Kim, Dongkyun
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2016.05a
    • /
    • pp.16-16
    • /
    • 2016
  • 실무에서 많이 사용되고 있는 면적강우량 산정방법은 관측소간 위치관계를 이용한 기법으로 본 연구에서는 실측자료를 기반으로 한 면적강우량 산정기법 개발을 위한 연구를 진행하였다. 강우공간분포의 실측자료인 기상레이더 자료를 이용하여 지점관측소가 위치한 곳에서의 강우강도와 주변지역의 강우강도를 검토하였고 지점관측소 위치에서 계측된 강우강도와 일정한 차이 범위 안에 있는 유사한 강우강도가 발생했던 빈도를 기준으로 관측소의 지배범위를 결정하는 방법인 '레이더 폴리곤 기법(Radar polygon Method, PRM)'을 제시하였으며, 이를 안성천 유역에 적용하여 유역 크기 및 관측소 배치에 따른 영향을 검토하였다. 본 연구는 관측기간 및 정확도의 문제로 인하여 제한적으로 활용되어 온 레이더 강우관측자료의 새로운 활용분야를 개척하였다는 점에서 큰 의미를 찾을 수 있다.

  • PDF

A Study on the Area Calculation of Community Facilities in Rural Villages (농촌마을 커뮤니티시설의 적정 면적 산정에 관한 연구)

  • Shin, Young-Sun;Kang, Young-Eun;Jee, Dal-Nim;Kim, Ji-Ae;Im, Seung-Bin
    • Journal of the Korean Institute of Landscape Architecture
    • /
    • v.37 no.6
    • /
    • pp.28-38
    • /
    • 2010
  • Community centers, silver towns and resting places are representative community facilities in rural villages. These community facilities affect villagers directly or indirectly in terms of life quality. Current community facilities of rural village are in poor condition in spite of their importance. In particular, the small size of community facilities and standardized programs are common issues in rural villages. As a result, it is necessary to research and investigate the improvement of community spaces and provide a variety of community activities. The purpose of this research is to provide appropriate area standards for 5 category community facilities(community centers, sliver towns, resting places, community yards, gymnasiums and recreation areas) and also to provide basic information for future village planning. The precedent study of community facilities was investigated. In addition, 25 rural villages in 5 districts were investigated regarding their facility conditions and current community satisfaction. As a result, appropriate rural village area standards are provided. The research results of the community facility standards are almost higher than the current representative community facilities average area. This is expected to improve the community facility environment, people's activities and to increase the growth of awareness in community.

Development of Biotope area ratio Estimation Model using GIS (GIS를 활용한 생태면적률 산정 모델 개발)

  • Lee, Ji-Soo;Lee, Seung-Wook;Lee, Seung-Yeob;Hong, Won-Hwa
    • Spatial Information Research
    • /
    • v.19 no.2
    • /
    • pp.9-18
    • /
    • 2011
  • The purpose of this research is to evaluate an accurate biotope area ratio model with efficiency and convenience of database management through promoting sustainable development to provide people amenities in a new town. In particular, the biotope area ratio is used not only in the environment impact assessment but Green building certification criteria. But now there is no any index map of biotope. So it is very hard to implement with data for supplement results. In this research, we suggest the model of integrated attributable information. The evaluation of biotope area ratio is to include a basic land use planning map and a building coverage area which is a wall of greening surface and roof. In case of non building coverage area, the evaluation of biotope area ratio is to include water space, artificial ground, natural ground and pervious gap-pave. A weighted value on the spatial information is combined into the information. And then the merged one is given a land use planning information in a block. In the weighted value on the space type information, it is possible to in its circumstances. Therefore, it can be substituted a correspondence of numerical change for various values elastically in this model.

Establishment of Optimal Management Plans on Agricultural Groundwater Resources of the Yeosu County (여수시 농어촌지역 지하수자원 적정 관리방안)

  • Seo, Hyo Kyoung;Shin, Hyung Jin;Lee, Byung Sun;Lee, Gyu Sang
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2020.06a
    • /
    • pp.282-282
    • /
    • 2020
  • 본 연구는 여수시 농어촌지역에 대하여 지하수 함양특성, 개발가능량 산정 및 오염부하량 등의 조사를 통해서 체계적인 지하수자원의 보전관리(안)을 수립하기 위해 수행되었다. 연구지역은 여수시 화양면, 소라면 2개 면을 포함하는 농어촌 용수구역(여소지구)으로, 여소지구의 총면적은 130.68 ㎢이며, 이 중 임야면적은 81.57 ㎢, 경지면적은 32.98 ㎢ 이고, 경지면적은 논 15.37 ㎢, 밭 17.42 ㎢, 시설재배 0.19 ㎢로 구성되어 있다. 여소지구의 30년 강수평균은 1,454.08 mm/년이며, 지하수 함양량은 국가지하수관리 기본계획(국토교통부, 2019) 및 전라남도 지하수관리계획(전라남도, 2009) 보고서를 참고하여 평균값인 11.28%로 산정한 결과, 21,279 천㎥/년으로 분석되었다. 또한, 지하수연보(국토교통부, 2018)의 세부용도별 이용량을 활용하여 지하수 이용량을 산정한 결과, 2,638.35 천㎥/년이었으며, 강수량, 함양률 및 면적 값을 고려하여 지하수 개발가능량을 산정한 결과, 16,387.57 천㎥/년, 개발가능량 대비 이용량은 16.11%로 확인되었다. 여소지구의 질산성질소 항목은 총 181개소(경지면적 0.2 ㎢당 1점)에 대해 분석한 결과, 전체 평균값은 6.67 mg/L이었으며, 농업용수 수질기준(20 mg/L)을 초과한 관정은 8개소(6%)로 확인되었다. DRASTIC을 이용한 오염취약성 지수는 평균값이 119.57점으로 나타나 오염취약성이 낮은 것으로 분석되었다. 신고·허가된 축사 시설을 기준으로 점오염원 조사결과, 단위면적당 시설수(오염원밀도)는 3.12 개소/㎢로 조사되었으며, 인구, 가축 및 토지이용 등 인자별을 고려하여 오염부하량을 산출한 결과, 단위면적당 오염부하량은 75.30 kg/day/㎢로 확인되었다. 행정구역별로 7가지 지표를 반영하여 관심, 주의, 경계 및 심각 4단계로 기준을 설정하여 지하수관리 필요지역을 선정하였다. 수량 측면은 개발가능량 대비 이용량, 단위면적당 이용량 및 관정밀 3가지 지표를 적용하였고, 수질 측면은 질산성질소 평균, 오염취약성 지수, 오염원밀도 및 단위면적당 오염부하량 4가지 지표를 적용하여 선정하였다. 지하수관리 필요지역을 분석한 결과, 전체 18개 리 중에서 14개 리에서 수량관리 12개리에서 수질관리 필요지역이 나타났다. 수량관리 필요지역은 지하수 취수량 조정 및 관리 확충 등의 대책방안이 마련되어야 하며, 수질관리 필요지역은 주변 오염원관리 및 수질검사 강화 등의 대책방안이 필요할 것으로 판단된다.

  • PDF

검증용 위성 열모델을 이용한 위성 방열판 최적설계

  • Kim, Hui-Gyeong;Choe, Seong-Im
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.37 no.2
    • /
    • pp.174.2-174.2
    • /
    • 2012
  • 위성의 방열판 설계 과정은 수치해석을 위해 위성을 모델링한 열모델에서 분할 격자인 노드를 기준으로 방열판 위치와 형상, 크기를 조절하면서 한계 온도조건을 만족할 때까지 설계 엔지니어의 판단에 의존하여 열해석을 반복하는 것이 보편적인 방식이다. 대부분 방열판 면적을 줄이기 위한 추가적인 노력을 하지 않기 때문에 필요 이상의 과도한 방열판 설계를 하는 경우가 많은 것이 사실이다. 이러한 방열판 설계에서 최소한의 방열판 면적을 사용하여 한계 온도를 만족하도록 설계를 최적화 한다면 무엇보다 전체 위성 열설계의 효율성과 경제성을 높일 수 있는 바탕이 될 수 있을 것이다. 위성의 방열판 설계는 방열판 영역 내에서 동일한 면적을 가지더라도 위치나 형상에 따라 그 효과가 상당히 차이가 날 수 있기 때문에 실제 방열판 설계에서는 이러한 점을 고려하는 것이 필수적이다. 먼저 위성은 열해석에 알맞는 격자 크기로 분할된 노드로 이루어진 열모델로 모델링되어 개발된다. 방열판이 설계되는 방열판 영역 역시 격자 모양의 노드로 분할되기 때문에 열해석을 이용하여 방열판 설계를 한다면 노드 크기를 기준으로 노드 분할 형태에 따라 설계를 한다. 그래서 위성 열모델에서 방열판 영역의 각 노드가 방열판 노드 여부에 따라 모자이크와 같은 분포의 방열판 설계를 하게 되므로 방열판 노드 분포의 최적화가 방열판 최적 설계를 의미하게 된다. 본 연구에서는 방열판 설계 최적화를 위해 일반적인 위성 프로그램의 열제어 개발에서 사용하는 위성 열모델과 열해석 프로그램을 최적화 기법과 동일한 언어로 다시 개발해야 하는 부담 없이 그대로 최적화 기법과 연동할 수 있도록 하는 방법을 제안하고, 실제 소형의 검증용 위성 열모델을 개발하여 여러 가지 해석 조건에 따른 방열판 최적 설계 결과를 비교하고 검토함으로써 이러한 접근 방식을 검증해보고자 하였다.

  • PDF

Parcel Boundary Demarcation in Residential Area Using High Resolution Aerial Images (고해상도 항공영상을 이용한 주거지역 필지경계 설정에 관한 연구)

  • Park, Chiyoung;Lee, Jaeone
    • Spatial Information Research
    • /
    • v.23 no.1
    • /
    • pp.59-68
    • /
    • 2015
  • As part of an effort to leap smart cadastre system by doing rearrangement of various mismatches in the land register, the cadastre renovation project is being recently conducted. In response to this demand, this paper proposes an image-based rapid parcel boundary demarcation plan using the high resolution aerial image with a GSD (Ground Sample Distance) of 5cm that matches to real ground boundary situation in residential area. To review the feasibility and accuracy of this proposed methodology, we compared the accuracy of parcel boundary point and parcel area extracted from the digital stereo plotting on the basis of results of cadastral boundary surveying and land register over the selected two test areas. The comparative accuracy result of all boundary points by digital stereo plotting is satisfied with accuracy requirement according to the criteria of the enforcement regulation of cadastral surveying, whereas it exceeded allowable error of ${\pm}0.07m$, more strictly specified in the Special Act on Cadastral Renovation. And about 20% of the total 70 parcels extracted by digital plotting are out of area tolerance in Jecheon study area, and 10% of the total 19 parcels in Suwon study area. The parcels exceeding accuracy limit are mostly due to the occlusion caused by building roof or eaves, and the obstacles such as trees existing on the boundary. Furthermore, an object identification is impossible in image because of vague boundary reference in case of nonexistence of man-made structures or natural features. Therefore, the utilization of boundary identification stickers is recommended as a solution for these types of land parcel.

Analysis of Quantitative Topographical Change in Eulsuk-Island Using Aerial Images (항공영상을 이용한 을숙도 지형의 정량적 변화 분석)

  • Lee, Jae-One;Song, Yu-Jin;Kim, Yong-Suk;Park, Hong-Joo
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.29 no.5
    • /
    • pp.527-534
    • /
    • 2011
  • This paper describes an analysis of topographical changes to the Eulsuk-Island at the Nakdong River Estuary using a long-term dataset of high resolution aerial images from 1983 to 2007. Ground control surveying was performed at some feature points using GPS(Global Positioning System) to accomplish AT(Aerial Triangulation) for past aerial images. Even if some still existing feature points appeared on old aerial images were used as GCPs(Ground Control Points) for past aerial images in AT, its accuracy reached at 1m level. Since then, a quantitative analysis of topographical changes was conducted on digital orthophotos produced by a series of aerial images taken by different years. The change volume of total area, construction, vegetation, buildings and roads could be extracted per each period in study area. The total area decreased from 1983 to 1992, but it has not almost changed since 1992. According to the continuous development, the area of vegetation has steadily decreased, while that of buildings and roads has generally increased. The result of this study can provide us with invaluable base data for further topographical change monitoring in Eulsuk-Island and Nakdong River estuary caused by continuous development in this area.