• Journal of Energy Engineering
• /
• v.23 no.3
• /
• pp.7-12
• /
• 2014

This paper suggest mandatory target predestinator of natural gas wholesale and retail provider will set appropriate target. To analysis natural gas energy saving trend forecast, reduce natural gas forecast and using technology and forecast analysis for equipment is draw based on result of developing tool that more detailed gas field. Also this paper calculate effect on energy saving through various scenarios, efficiency consideration of gas equipment and subsidy condition.

• Journal of Energy Engineering
• /
• v.12 no.3
• /
• pp.165-176
• /
• 2003

In this study, the exergy analysis is conducted on the well known performance of already developed system and then compared with the efficiency of each equipment to propose optimum operation of the system. The system used in this study is 500 MW coal firing power plant. The efficiency of the boiler is 67% and the condenser is 99% by exergy analysis. The exergy consumption of the boiler was 32.95% at 100% load. The exergy consumption of the high pressure turbine and the low pressure turbine is 8.31% and 8.12%, respectively. Together with the concrete study on the object of performance revision of the low efficient development system proved in this study, if detailed exergy analysis on the operation condition of the equipments of the development system presently being operated is continued, then it is expected to help minimize the exergy consumption of relatively low efficient parts that are worn-out or miss-installed.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.19 no.2
• /
• pp.163-170
• /
• 2023

Since spent nuclear fuel assemblies (SFA) are transported to interim storage or final disposal facility after cooling the decay heat, finite element analysis (FEA) with simplification is widely used to show their integrity against cladding failure to cause dispersal of radioactive material. However, there is a lack of research addressing the comprehensive impact of shape and element simplification on analysis results. In this study, for the optimization of a typical pressurized water reactor SFA, different types of finite element models were generated by changing number of fuel rods, fuel rod element type and assembly length. A series of FEA in use of these different models were conducted under a shock load data obtained from surrogate fuel assembly transportation test. Effects of number of fuel rods, element type and length of assembly were also analyzed, which shows that the element type of fuel rod mainly affected on cladding strain. Finally, an optimal finite element model was determined for other practical application in the future.

• Journal of Life Science
• /
• v.17 no.2 s.82
• /
• pp.266-271
• /
• 2007

Bisphenol A (BPA) has been widely used as a monomer for production of epoxy resins and polycarbonate plastics. The annual production of BPA exceeds 640,000 metric tons in worldwide. BPA, a suspected phenolic endocrine disrupter, is moderately soluble and frequently detected in industrial wastewater. To date, HPLC and GC has been used for BPA analysis. However, HPLC and GC-analysis need high operation lost, experts, and an elaborate pre-treatment of samples, and is difficult to apply on-time and mass analysis. Therefore, simple, mass and rapid detection of BPA in environments is necessary. In the present study, spectrophotometric method of BPA quantification was developed. Based on blue-color product formation with BPA and ferric chloride/ferricyanide under the optimized conditions, the standard curve was acquired $({\lambda}_{750}=0.061\;BPA\;[{\mu}M]+0.07155,\;R^2=0.992)$. Using an established method, the BPA contents in the soil extract, and different water samples and living products, including disposable syringe, cup and plastic tube, were analyzed. The results suggested that the method is useful for BPA determination from different massive samples. Since the BPA metabolites, nontoxic 4-hydroxyacetophenone or 4-hydroxybenzaldehyde, did not form blue-color product, this method is also useful to screen a microorganism for BPA bioremediation.

• The Korean Journal of Pesticide Science
• /
• v.15 no.4
• /
• pp.417-433
• /
• 2011

The study tested QuEChERS (quick, easy, cheap, effective, rugged and safe) sample preparation and HPLC-MS/ MS analysis for measurement of pesticide residues in fruit and vegetable. 240 kinds of pesticides spiked at three levels of 90, 45, 9 ng/g in lettuce and apple. For QuEChERS sample preparation, graphitized carbon black (GCB) was used for only lettuce in dispersive-SPE as absorbent. Matrix-matched standard calibration was used for quantitative analysis of HPLC-MS/MS. 218 pesticides (91%) in apple and 207 pesticides (86%) in lettuce showed recoveries in the range of 70~120% with $RSD{\leq}20%$. The lowest calibrated level (LCL) were 4.5 ng/g for 192 pesticides, 9 ng/g for 42 pesticides, 45 ng/g for 3 pesticides and 3 pesticides were not detected at all concentration levels. The results showed that the QuEChERS sample preparation and HPLC-MS/MS analysis can be applied to multi-residue analysis of pesticides in vegetables and fruits.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.10
• /
• pp.4780-4785
• /
• 2012

As many mobile devices such as smart phones and tablets are widely spread, optimized mobile video encoder used during video recording application is needed. In this paper, we implemented H.264/AVC base profile video encoder on a mobile device and empirically optimized control parameters of the encoder. As the experiment, we more than 100 test cases were designed with varying Lagrangian optimization, Hadamard Transform, search range, I-frame period, and reference frames. During the experiment, we measured picture quality, bit-rate, encoding time, motion estimation time, and power consumption. From the result, we can determine optimal values for the H.264 control parameters.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.106-112
• /
• 2008

Personalization is user oriented dynamic method based on user preferences for easy access to what users want to view or get. It has become more important in mobile domain with rapid growth of wireless Internet and mobile phone market after success of web based market and therefore, it can be applied to service of spatial analysis result. In this paper, spatial analysis using user profile and notification service methods are proposed as one of personalized spatial data service methods for mobile users. A service system for spatial analysis with user profile is designed to prove possibility of spatial analysis based on user preferences and notification service is also designedto show generated output can be sent to user's mobile devices efficiently to make users informed of preferred information. Prototype system is implemented and it is applied to real estate data that has many selectable conditions by users. Information service based on user preferences can be applied to spatial data by using proposed system and it is efficient when cache module is used to shorten response time. Various user models for application domains and performance evaluation methods need to be developed in the future.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.04a
• /
• pp.25-26
• /
• 2013

현재 국내의 침윤소화약제 기술기준은 심부화재 진압용 침윤소화약제의 기술기준인 '소화약제의 형식승인 및 제품검사의 기술기준 고시(2012-57호)'에서 물리적 기술기준인 표면장력에 대한 기준만 존재하며, 침윤소화약제의 성능평가 실험은 NFPA 18에서 명시하고 있는 실험방법으로 국한되어 있어 이를 통한 침윤소화약제의 실질적인 성능평가는 어려운 실정이다. 이 때문에 명확하고 구체적인 침윤소화약제의 성능평가 기법을 제시하기 위해 실험기기를 자체 개발하였으며, NFPA18의 침윤소화약제 성능평가와 자체 개발한 실험기기를 이용한 성능평가의 결과를 비교 분석하여 최적화된 성능평가 방법을 제시하고자 한다. 이에 앞서 본 연구에서는 NFPA 18상에 명시되어 있는 심부화재 테스트를 동일 조건으로 진행하여, 수돗물과 침윤소화약제의 성능 비교에 대한 변별력을 확인하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.125-125
• /
• 2013

기계부품 및 자동차부품 등의 내마모나 내피로성의 향상을 위한 표면처리로서 고주파처리, 침탄처리, 질화처리 등이 사용되고 있다. 최근에는 변형을 최소화 함으로써 후가공을 생략할 수 있는 질화처리가 주목받고 있다. 질화처리종류로는 염욕질화나 가스질화법이 사용되고 있으나, 이들에 비해 환경오염 및 공해가 적고 인체에 무해한 플라즈마 연질화법이 사용되고 있다. 플라즈마 연질화 기술은 IT기기의 제품에 적용되는 표면경화의 공정개발은 미비한 실정이다. 마이크로 구동 요소 부품중의 하나인 Leadscrew는 이송장치를 구성하는 핵심 부품으로 IT기기의 정밀 이송 및 구동제어에 사용되는 핵심 부품으로 사용되고 있으며, 리드스크류의 소재인 SWCH1018A(냉간압조용강선)은 표면 경도가 낮고 변형이 쉽기 때문에 표면 경화를 위한 플라즈마 연질화 기술을 이용하고자 했다. 본 연구는 플라즈마 연질화 공정을 적용한 시편의 표면경도를 높혀주고 변형을 최소화 할 수 있는 공정을 확인하는 것이다. 공정변수를 변화 시키면서 얻어진 시편의 표면미세 구조를 미소경도측정, XRD, SEM분석을 통하여 확인하였으며, 이를 통해 시편 표면경도를 높여주는 공정 조건을 도출하였다.

• Annual Conference of KIPS
• /
• 2001.10b
• /
• pp.1229-1232
• /
• 2001

코일에 고주파전압을 걸면 교류자계가 발생하며 이 자게 내의 금속재료에 와전류가 발생하는데 와전류는 재료의 재질, 결함, 이종금속, 형상변화 등에 의해 그 발생상태가 다르기 때문에 검출용 코일에서 얻어진 신호성분을 해석함으로써 재료의 비파괴검사가 가능하다. 원자력발전소에서는 증기발생기와 열교환기를 정기적으로 이 와전류 탐상검사를 수행하고 결함상태를 평가하여 그 결과를 대용량 Media에 저장한다. 본 논문에서는 평가결과 정보를 추출하고 변환 처리하여 RDBMS에 입력 관리하는 과정과 다양한 형태의 열교환기 Tubesheet를 편집하는 기능, 사용자의 검색조건 선택에 따라 데이터베이스를 Query하여 Tubesheet에 Mapping 처리하는 기능, 검사주기 및 기기별로 평가결과를 비교 분석할 수 있는 통계/보고서 기기사양정보 및 검사정보관리 등 제반 Application 시스템 구현 결과를 소개한다.