• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.225-230
• /
• 2003

들깨는 한국, 일본, 중국 등에서 신선엽채소, 절임, 약재, 공업용 등 다양한 쓰임새를 갖고 있을 뿐 아니라 안전농산물에 대한 소비자의 관심증가로 수요량이 점점 증가하고 있으며, 들깻잎 또한 식생활의 변화로 인한 육류와 더불어 수요량이 급격히 증가하여 기계화에 의한 대량생산은 충분히 경쟁력을 갖춘 작목으로 발전할 수 있다고 사료된다 (중략)

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.6
• /
• pp.57-62
• /
• 2001

Recently, it has increased that the importance of gas pressure weldment of steel bars in large construction bars. But there has hardly been any studies about it. Therefore we need more research. SD40 steel bar (32mm in diameter) which has been practically used at construction sites are tested about tension, bonding, fatigue, a macro structure and micro structure at foil gitudinal section and hardness to fed out the mechanical property and best welding ranges in some cases of mechanical cut and gas cut before gas pressure welded. It is that a gas-pressure welded zone of steel bar where was cleaned of impurities in way of two-upsetted method is more excellent bending and tension property than the regulation of KD D 0244. Also gas cut bars gained hardness from the heat affected zone so. In conclusion, to improve the weldability of steel bars, it is considered best to clean mechanically cut sutra- faces and then weld them by a method of 2 step upset way.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.12
• /
• pp.30-37
• /
• 1996

On-line process control equipment for CO$_{2}$ laser cutting is not available for industrial applications. The major part of the industrial laser cutting machines are adjusted off-line by highly educated engineers. The quality inspection of the sample is visual and referred to different quality scales. Due to the lack of automation the potential laser users hesitate to implement the cutting method. The first step toward an automation of the process is the development of a process monitoring system and the research is cincentrated on the area of on-line quality monitoring during CO$_{2}$ laser cutting. The method is based on the detection of the emitted light from the cutting front by photo diode. The developed monitoring system consists of the OP Amplifier, A/D convertor, power supply and PC. The signal from the photo diode has been undertaken from Fourier analysis and statistical analysis with real time. The photograph of striation pattern was taken by metallurgical microscope. As a result, it is possible to predict the striation pattern according to the beam traveling speed.

• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.1
• /
• pp.55-60
• /
• 2002

Purpose : To assess the change in the number of mechanoreceptors of posterior cruciate ligament(PCL) after transecting posterior cruciate ligament of the rabbit. Materials and Methods : We selected 10 skeletally-matured New Zealand white rabbits and one of the two posterior cruciate ligaments was transected and the other underwent sham-operation on each rabbit. Afterward, PCLs with synovium were obtained at femoral attach area in both knees in 20 weeks postoperatively, but in one of the cases, the transected PCL did not heal and had to be excluded from this study. Consequently, histologic examination of the ligament for the remaining 9 cases was done after being prepared with modified gold chloride stain. Results : The study showed a little bit more decrease in the number of mechanoreceptors in the transected group compared with that in the sham-operated group, but the number was statistically negligible. Conclusions : It is considered that the knee joint with injured PCL may still maintain proprioception since the decrease in the number of mechanoreceptors is not considerable, but further study on biomechanical role and function of mechanoreceptor of healed PCL is required.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.6
• /
• pp.409-415
• /
• 2021

Medical waste management is becoming increasingly important, specifically in light of the current COVID-19 pandemic, as hospitals, clinics, quarantine centers, and medical research institutes are generating tons of medical waste every day. Previously, a traditional incineration process was utilized for managing medical waste, but the lack of landfill sites, and accompanying environmental concerns endanger public health. Consequently, an innovative sterilization shredding system was developed to resolve this problem. In this research, we focused on the design and numerical analysis of a shredding system for hazardous and infectious medical waste, to establish its operational performance. The shredding machine's components were modeled in a CAD application, and finite element analysis (FEA) was conducted using ABAQUS software. Static, fatigue, and dynamic loading conditions were used to analyze the structural stability of the cutting blade. The blade geometry proved to be effective based on the cutting force applied to shred medical waste. The dynamic stability of the structure was verified using modal analysis. Furthermore, an S-N curve was generated using a high cycle fatigue study, to predict the expected life of the cutting blade. Resultantly, an appropriate shredder system was devised to link with a sterilization unit, which could be beneficial in reducing the volume of medical waste and disposal time, thereof, thus eliminating environmental issues, and potential health hazards.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.42-47
• /
• 2002

가. 작업별 시험결과 1) 마늘쪽 분리·선별작업 o 마늘쪽 분리기는 통마늘을 1 또는 2∼3쪽으로 분리하여 1차 선별하고, 마늘쪽 선별기는 분리된 마늘을 3단계로 선별되며 작업성능은 시간당 60접 이상을 분리 및 선별할 수 있다. o 개발된 마늘쪽 분리기와 선별기는 소형 경량이며 취급조작이 편리한 기종하고 작업성능이 높고 손상률이 적어 '01년도에 60대가 농가 보급되었으며 '02년도에는 확대 보급될 전망이다. 2) 파종작업 o 작업성능은 경운기용 파종기 2시간/10a, 승용관리기용 직립파종기는 1시간/10a으로 능률적이었으며 작업정도와 생육상태가 양호하였다. o 지역별 파종작업 체계 -난지형 마늘 파종은 직립파종을 하며 제주, 남해 등은 마늘을 파종한 후 10-11월 줄기가 자랐을 때 무공비닐을 피복하고 줄기를 유인하며, 무안은 유공비닐을 피복하고 구멍에 마늘의 1/2 또는 2/3만 묻히도록 파종하며 별도의 줄기유인 작업은 하지 않는다. 의성지역의 한지형 마늘은 트랙터로 쇄토정지후 보행관리기로 골을 내고 인력으로 마늘을 놓으면 관리기가 다음 골을 내면서 복토하는 체계이다. 3) 마늘 수확작업 -마늘 수확기는 난지형 마늘 수확에는 효과가 적으나, 한지형과 같이 깊게 파종하여 인력으로 뽑기 어려운 재배지역에서는 필요한 기종이며, 토양수분이 많으면 굴취된 마늘과 혼이 진동판에 걸려 작업상태가 불량하므로 마늘과 흙의 이송이 원활토록 진동판 형상 및 적정 진폭 구명이 요구됨 4) 마늘줄기 절단작업 -난지형 마늘은 포장에서 건조후 단기간(1-2주)내에 줄기절단을 해야하므로 기계환가 시급하나 한지형 마늘은 아직도 대부분 줄기를 자르지 않고 묶어서 판매하고 있어 기계화의 시급도는 떨어짐 5) 마늘 선별작업 -마늘선별기는 작업성능이 높고 5등급으로 균일 선별되었으며 손상도 없었으나, 기계가 크고 무거워 이동이 곤란하고 가격이 비싸므로 선별등급을 3∼4단계로 줄이고 소형 농가보급형으로 개량제작이 요구됨. 나. 마늘재배 일관기계화에 의한 노동투하시간과 비용 -종자준비부터 통마늘선별까지의 일관기계화로 투입된 주요작업의 노력은 75∼76%가 절감되고, 재배규모 3ha기준시 비용은 44-53%절감되었음.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1997.10a
• /
• pp.69-74
• /
• 1997

MCFC(Molten Carbonate Fuel Cell) Ni anode의 기계적 특성을 개선시키기 위해서 Ni-W복합재료를 기계적 합금법으로 제조하였다. 기계적 합금화한 분말을 XRD, SEM으로 관찰한 후 두께 1mm, 직경 8mm의 원반형으로 성형하였다. 소결은 120$0^{\circ}C$의 수소 분위기내에서 10시간 행하였다. 이렇게 제조한 시편의 절단된 면을 연마하여 SEM 및 EDX로 관찰하였으며 XRD로써 성분분석 하였다. 기계적 합금화 시간이 증가함에 따라 불충격에 의한 결정립 미세화가 이루어졌으며 80시간 기계적 합금시 재료의 규칙적인 결정이 파괴되어 비결정질화 되었다. 기계적합금으로 Ni 기지내에 균일하게 분포된 W은 분산강화효과를 통해 Ni anode의 기계적 특성을 개선시킬 것으로 기대된다.

• Korean Journal of Food Science and Technology
• /
• v.20 no.6
• /
• pp.749-754
• /
• 1988

The texture measurement of Chinese cabbage leaves used for Kimchi preparation were con ducted by cutting and compression test and the results were compared to the sensory evaluation. The cutting force of cabbage leaf stalk increased by blanching or salting, and a maximum cutting force was attained by salting in 15% salt solution for 5 hours. The compression force and recovered height measured by compression test of Chinese cabbage leaf stalk decreased by blanching or salting, and the breaking point disappeared. Treatment with $CaCl_2$ solution increased the cutting force compression force and breaking strength of fresh leaves, but the effect disappeared by salting or blanching. Cutting strength could be used as a parameter indicating the hardness and chewiness of salted cabbage. Compression force and breaking strength could indicate the textural changes of blanched leaves, but were not useful for the measurement of hardness and chewiness of salted leave.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.5748-5755
• /
• 2015

Scribing is cutting process to determine production amount and characteristic of LED chip. So it is an important process for fabrication of LED chip. Mechanical process and conventional scribing process with laser source has several problems such as thermal deformation, decreasing of material strength and limitation of cutting region. To solve these problems, internal laser scribing process that generates void in wafer and derives self-crack has been researched. However, studies of sapphire wafer cutting by internal laser scribing process for fabrication of LED chip are still insufficient. In this paper, cutting parameters were determined to apply internal laser scribing process for sapphire wafer for fabrication of LED chip. Then, foundation of cutting condition was established to set up internal laser scribing system through investigation of cutting characteristics by several experiments.

• Journal of KIISE:Software and Applications
• /
• v.34 no.7
• /
• pp.595-602
• /
• 2007

This paper proposes a method that discriminates signal peptide and predicts the cleavage site of the secretory proteins cleaved by the signal peptidase I. The preprocessing stage uses hydrophobicity scales of amino acids in order to predict the presence of signal sequence and the cleavage site. The preprocessing enhances the performance of the prediction method by eliminating the non-secretory proteins in the early stage of prediction. for the effective use of support vector machine for the signal sequence prediction, the biologically relevant distance between the amino acid sequences is defined by using the hydrophobicity and substitution matrix; the hydrophobicity can be used to Predict the location of amino acid in a cell and the substitution matrix represents the evolutionary relationships of amino acids. The proposed method showed 98.9% discrimination rates from signal sequences and 88% correct rate of the cleavage site prediction on Swiss-Prot release 50 protein database using the 5-fold-cross-validation. In the comparison tests, the proposed method has performed significantly better than other prediction methods.