• Journal of the Korean Wood Science and Technology
• /
• v.9 no.3
• /
• pp.7-15
• /
• 1981

A Japanese larch has been reforested very much in Korea, but it is not used as a wood resources for paper pulp by now. So this study is carried out to utilize the larchwood for paper pulp manufacture through the Asplund pulping process. The experiment on increasing in the brightness of the pulp is made through the addition of $MgSO_4$, $ZnSO_4$, $Al_2(SO_4)_3$, and KI as a cellulose stabilizer in chip treatment with caustic soda which is followed by high-temperature defibration and conventional peroxide bleaching (5% NaOH plus 2% additive salt per wood in cold pretreatment), or in high-consistency (30%) pulp bleaching of hydrogen peroxide and peracetic acid (100% acitve oxygen per lignin) for conventional one. The results obtained are as follows: 1. The solution of 0.5% additive salts had different pH by the sort of bases that was pH 5.7 in $MgSO_4$, liquor, pH 4.9 for $ZnSO_4$, and pH 2.9 for $Al_2(SO_4)_3$, and in the precepitation of bases which ranged to pH 6-13 for $MgSO_4$, pH 5-12 for $ZnSO_4$, and pH 3-10 for $Al_2(SO_4)_3$. 2. The cellulose stabilizer affective in high-consistency peroxide bleaching was KI, $MgSO_4$, and $ZnSO_4$, but has made a little improvement in de lignification and brightness of pulp in comparison with no addition. 3. The higher alkalinity in the chip treatment has made the higher strength and brightness of larchwood Aspiund pulp instead of downing the pulp yield. And the effective compound for cellulose stabilizer in caustic soda pretreatment of chip was $ZnSO_4$, $Al_2(SO_4)_3$ and KI in order for the conventional peroxide bleaching after Asplund pulping. 4. Therefore, the more effective additives for cellulose stabilization in high-temperature defibration of larchwood suppose to be $ZnSO_4$, $Al_2(SO_4)_3$, and KI, while KI and $MgSO_4$ for peroxide bleaching.

• Journal of the Korean Wood Science and Technology
• /
• v.37 no.6
• /
• pp.505-516
• /
• 2009

The effects of wood species, particle size of wood flours and coupling treatment on the mechanical properties of wood plastic composites (WPC) are investigated in this study. Chemical components of wood flour from 3 different wood species were analyzed by the chemical analysis. Wood flours of 40~60 mesh and 80~100 mesh were manufactured from Larix (Larix kaempferi Lamb.), Quercus (Quercus accutisima Carr.), and Maackia (Maackia amuresis Rupr. et Maxim). The wood flours were reinforced into polypropylene (PP) by melt compounding and injection molding, then tensile, flexural, and impact strength properties were analyzed. The order of alpha-cellulose content in wood is Quercus (43.6%), Maackia (41.3%) and Larix (36.2%). The order of lignin content in wood is Larix (31.6%), Maackia (24.7%), and Quercus accutisima (24.4%). The content of extractives in wood is in the order of Larix (8.5%), Maackia (4.4%), and Quercus accutisima (3.9%). As the content of alpha-cellulose increases and the lignin and extractives decreases, tensile and flexural strengths of the WPC increase. At the same loading level of wood flours, the smaller particle size (80~100 mesh) of wood flours showed highly improved tensile and flexural strengths, compared to the larger one (40~60 mesh). The impact strength of the WPC was not significantly affected by the wood species, but the wood flours of larger particle size showed better impact strengths. The addition of maleated polypropylene (MAPP) provided the highly improved tensile, flexural and impact strengths. Morphological analysis shows improved interfacial bonding with MAPP treatment for the composites.

• Journal of Chest Surgery
• /
• v.38 no.2 s.247
• /
• pp.101-109
• /
• 2005

Background: In sudden cardiac arrest, the effective maintenance of coronary artery blood flow is of paramount importance for myocardial preservation as well as cardiac recovery and patient survival. The purpose of this study was to directly compare the effects of pulsatile and non-pulsatile circulation to coronary artery flow and myocardial preservation in cardiac arrest condition. Material and Method: A cardiopulmonary bypass circuit was constructed in a ventricular fibrillation model using fourteen Yorkshire swine weighing $25\~35$ kg each. The animals were randomly assigned to group I (n=7, non-pulsatile centrifugal pump) or group II (n=7, pulsatile T-PLS pump). Extra-corporeal circulation was maintained for two hours at a pump flow of 2 L/min. The left anterior descending coronary artery flow was measured with an ultrasonic coronary artery flow measurement system at baseline (before bypass) and at every 20 minutes after bypass. Serologic parameters were collected simultaneously at baseline, 1 hour, and 2 hours after bypass in the coronary sinus venous blood. The Mann-Whitney U test of STATISTICA 6.0 was used to determine intergroup significances using a p value of < 0.05. Result: The resistance index of the coronary artery was lower in group II and the difference was significant at 40 min, 80 min, 100 min and 120 min (p < 0.05). The mean velocity of the coronary artery was higher in group II throughout the study, and the difference was significant from 20 min after starting the pump (p < 0.05). The coronary artery blood flow was higher in group II throughout the study, and the difference was significant from 40 min to 120 min (p < 0.05) except at 80 min. Serologic parameters showed no differences between the groups at 1 hour and 2 hours after bypass in the coronary sinus blood. Conclusion: In cardiac arrest condition, pulsatile extracorporeal circulation provides more blood flow, higher flow velocity and less resistance to coronary artery than non-pulsatile circulation.

• Journal of Chest Surgery
• /
• v.38 no.6 s.251
• /
• pp.428-433
• /
• 2005

Advanced age in Esophagectomy increases the risk of postoperative morbidity and mortality. However, the recent development of operative technique and perioperative care might have decreased the postoperative morbidity and mortality after esophagectomy. Material and Method: From March 2001 to July 2004, 174 patients underwent esophageal resection for esophageal cancer in the Center for Lung Cancer, National Cancer Center. The patients were divided into two groups : group 1 consisted of 27 patients aged 70 years or more, and group 2 consisted of 147 patients under 70 years of age. The two groups were compared according to preoperative risk factors, postoperative morbidity, operative mortality and survival. Result: The mean age was 63_4. There were 159 men. On histopathological examination, $93.1\%$ had squamous cell carcinoma. On the locations, $78.7\%$ were in mid and lower esophagus. Curative resections for esophageal cancer were possible in $162(93.1\%)$ patients. Mean hospital stay was 19.4 days with out difference between the groups. The overall postoperative morbidity were occurred in 61 patients $(35.1\%)$. The most frequent morbidity was pulmonary complication in $30(17.2\%)$. Preoperative incidence of hypertension, cardiac and pulmonary dysfunction were more common in Group I. However, there was no difference in overall postoperative morbidity, operative mortality and survival rate between the two groups. Conclusion: Esophagectomy for esophageal cancer could be carried out safely in patients over 70 years of age with satisfactory short-term results. Advanced age is no longer a risk factor for esophagectomy.

• Journal of Chest Surgery
• /
• v.29 no.11
• /
• pp.1218-1222
• /
• 1996

The reported incidence of postcardiotomy cardiogenic shock not responding to conventional therapy is still 0.1 to 0.8%. For this group of patients, more aggressive form of circulatory support must be employed. Centrifugal pumps are a ventricular assist device most commonly used on this purpose, due to low cost and easy availability. Currently, however, clinical experience of centrifugal pumps as a ventricular assist device is rarely reported in Korea. From January 1992 to January 1996, 2986 patients underwent cardiac operations on cardiopulmonary bypass at Seoul National University Hospital. Refractory postcardiotomy cardiac failure requring ventricular support with a Biomedicus centrifugal pump developed in ten of these patients. There were eight men and two women, ranged in age from nine years to 77 years with a mean of 50$\pm$20 years. The primary surgical procedures consisted of isolated coronary revascularization in four patients, combined coronary revascularization and aortic valve replacement in two, aortic dissection repair in two, pulmonary embolectomy in one, and heart transplantation in one. Of the ten patients, five had left ventricular assistance, one had right ventricular assistance, and four had biventricular assistance. Duration of ventricular assistance ranged from 24 to 175 hours, with a mean of 76$\pm$51 hours. Seven patients were weaned from ventricular assistance, and four of them discharged. The causes of death for nonsurvivors were progressive cardiac failure in two patients and multiorgan failure, intractable ventricular fibrillation, irreversible brain injury, and mechanical problem, respectively, in the other four. Survival was not predicted by time on cardiopulmonary bypass, aortic cross-clamp time, or duration of ventricular support. Major complications included bleeding(7), renal failure(6), infection(3) and neurologic complication(2). These results indicate that a centrifugal pump can provide reasonably satisfactory short-term circulatory support.

• Journal of Chest Surgery
• /
• v.42 no.6
• /
• pp.725-731
• /
• 2009

Background: Lobectomy and more extended anatomic resection are regarded as standard treatment for stage Ia non-small cell lung cancer, but approximately 15~40% of patients suffer from treatment failures such as cancer recurrence or death. The authors analyzed types and causes of treatment failures in surgically treated cases of stage Ia non small cell lung cancer. Material and Method: We retrospectively reviewed the medical records of 156 patients who had undergone complete resection for stage Ia NSCLC between Jan 1992 and Aug 2005. Patients were divided into two different treatment failure groups: cancer-related deaths and non-cancer-related deaths. Risk factors were analyzed in each group by the Kaplan-Meyer survival method and the Cox proportional hazard model. Result: Among the 156 patients, 93 were males; the mean age was 61. The median follow-up period was 33.8 months. The 5 year survival rate was 87.6%. Microscopic lympho-vascular permeation was reported in 10 patients. Recurrence was reported in 19 patients and 12 patients died due to recurrent lung cancer. Noncancer related deaths occurred in 16 patients. Risk factors for cancer recurrence and cancer related death were microscopic lympho-vascular permeation (HR=6.81, p=0.007, HR=7.81, p<0.001); for non-cancer related death, risk factors were pneumonectomy (HR=25.92, p=0.001) and postoperative cardiopulmonary complications (HR=29.67, p=0.002). Conclusion: After complete resection of stage Ia non small cell lung cancer patients, mortality includes not only cancer related deaths but also cancer unrelated deaths. Adjuvant chemotherapy is advised for patients who show microscopic lympho-vascular permeation, which is a risk factor for recurrence and for cancer related death. Patients who had pneumonectomy or who suffered from cardiac or respiratory complications need meticulous care in order to reduce comorbidity-induced death.

• Journal of Korea Water Resources Association
• /
• v.51 no.10
• /
• pp.863-874
• /
• 2018

The purpose of this study is to evaluate the future climate change impact on stream aquatic ecology health of Han River watershed ($34,148km^2$) using SWAT (Soil and Water Assessment Tool) and random forest. The 8 years (2008~2015) spring (April to June) Aquatic ecology Health Indices (AHI) such as Trophic Diatom Index (TDI), Benthic Macroinvertebrate Index (BMI) and Fish Assessment Index (FAI) scored (0~100) and graded (A~E) by NIER (National Institute of Environmental Research) were used. The 8 years NIER indices with the water quality (T-N, $NH_4$, $NO_3$, T-P, $PO_4$) showed that the deviation of AHI score is large when the concentration of water quality is low, and AHI score had negative correlation when the concentration is high. By using random forest, one of the Machine Learning techniques for classification analysis, the classification results for the 3 indices grade showed that all of precision, recall, and f1-score were above 0.81. The future SWAT hydrology and water quality results under HadGEM3-RA RCP 4.5 and 8.5 scenarios of Korea Meteorological Administration (KMA) showed that the future nitrogen-related water quality in watershed average increased up to 43.2% by the baseflow increase effect and the phosphorus-related water quality decreased up to 18.9% by the surface runoff decrease effect. The future FAI and BMI showed a little better Index grade while the future TDI showed a little worse index grade. We can infer that the future TDI is more sensitive to nitrogen-related water quality and the future FAI and BMI are responded to phosphorus-related water quality.

• Korean Journal of Medicinal Crop Science
• /
• v.4 no.1
• /
• pp.68-73
• /
• 1996

Stem length, main root length and main root diameter showed rapid increasement in two-years-old and three-years-old peony. And there after, the increasement was almost finished. Occurrence of disease was increasing every cultivated year, especially the development of leaf spot was most serious. In propagation by root dividing method, the radix yield (kg/10a) was increasing every cultivated year. However, the difference of radix yield at four and five-years-old peony were not significant. The radix yield of four-years-old peony was higher 26% than three-years-old one. As cultivated year goes by, content of paeoniflorin was increasing then the content was highest at four-years-old peony (4.06%). In 1995, the content, had no certain tendency, was highest at three-years-old peony (3.14%). At hot air drying, browing of peony radix was increasing every cultivated year. If we consider radix yield and color, three-years-old peony was proper object of harvesting.

• Korean Journal of Soil Science and Fertilizer
• /
• v.35 no.6
• /
• pp.352-360
• /
• 2002

This study was carried out to find out the effect of Milk vetch(Astragalus sinicus L.) on growth, and yield of rice, physicochemical properties of soil, reduction rate of nitrogen fertilization, and soil improvement under the different plowing time with Milk vetch cultivated in paddy field, plowing at maximum blooming, last blooming, fruiting stages. The fresh weight of Milk vetch at each plowing time of maximum blooming, last blooming and fruiting stage was 22,500, 20,000, $12,500kg\;ha^{-1}$ respectively. Content of total nitrogen at three plowing times was 2.95, 2.66, and 2.47% and the C/N ratio were 15.7, 18.0, and 19.2, respectively. Physico-chemical properties of soil were improved in cultivated milk vetch, the content of T-N. OM and porosity ratio were increased while the content of $P_2O_5$ and bulk density, solidphase ratio were decreased compared to noncultivated milk vetch. Content of $NH_4-N$ in soil was highest plowing at maximum blooming stage and appeared an increasing tendency according to increased nitrogen level. Amount of nitrogen fertilizer by rice was highest plowing at maximum blooming stage and appeared an increasing tendency according to increased nitrogen level. Nitrogen-use efficiency was high in $33kg\;ha^{-1}$ nitrogen level at three plowing times. The number of spikelets per $m^2$ was high in plowing at maximum blooming stage, last blooming stage and the percentage of ripeness was high in fruiting stage of milk vetch. So the rice yield was increased 9%, 8% in $55kg\;ha^{-1}$ nitrogen level plowing at maximum blooming stage, last blooming stage and 1% in $77kg\;ha^{-1}$ nitrogen level plowing at fruiting stage compared to conventional cultivation.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.395-402
• /
• 2011

The nanomechanical properties of fully lithiated and unlithiated silicon nanowire deposited on silicon substrate have been studied with atomic force microscopy. Silicon nanowires were synthesized using the vapor-liquid-solid process on stainless steel substrates using Au catalyst. Fully lithiated silicon nanowires were obtained by using the electrochemical method, followed by drop-casting on the silicon substrate. The roughness, derived from a line profile of the surface measured in contact mode atomic force microscopy, has a smaller value ($0.65{\pm}0.05$ nm) for lithiated silicon nanowire and a higher value ($1.72{\pm}0.16$ nm) for unlithiated silicon nanowire. Force spectroscopy was utilitzed to study the influence of lithiation on the tip-surface adhesion force. Lithiated silicon nanowire revealed a smaller value (~15 nN) than that of the Si nanowire substrate (~60 nN) by a factor of two, while the adhesion force of the silicon nanowire is similar to that of the silicon substrate. The elastic local spring constants obtained from the force-distance curve, also shows that the unlithiated silicon nanowire has a relatively smaller value (16.98 N/m) than lithiated silicon nanowire (66.30 N/m) due to the elastically soft amorphous structures. The frictional forces of lithiated and unlithiated silicon nanowire were obtained within the range of 0.5-4.0 Hz and 0.01-200 nN for velocity and load dependency, respectively. We explain the trend of adhesion and modulus in light of the materials properties of silicon and lithiated silicon. The results suggest a useful method for chemical identification of the lithiated region during the charging and discharging process.