• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.445-456
• /
• 2009

Statement of problem: Many studies have been conducted to improve the primary stability of implants by providing bioactive surfaces via surface treatments. Increase of surface roughness may increase osteoblast activity and promote stronger bonding between bone and implant surface and it has been reported that bioactive surface or titanium can be obtained through alkali and heat treatment. Purpose: The purpose of this study was to evaluate the stability of alkali and heat treated implants via histomorphometric analysis. Material and methods: Specimens were divided into three groups; group 1 was the control group with machined surface, the other groups were treated for 24 hours in 5 M NaOH solution and heat treated for 1 hour at $600^{\circ}C$ in the atmosphere (group 2) and vacuum (group 3) conditions respectively. Surface characteristics were analyzed and fixtures were implanted into rabbits. The specimens were histologically and histomorphometrically compared according to healing periods and change in bone composition were analyzed with EPMA (Electron Probe Micro Analyzer). Results: 1. Groups treated with alkali and heat showed increase of oxidization layer and Na ions. Groups 2 which was heat treated in atmosphere showed significant increase of surface roughness (P<.05). 2. Histomorphometric analysis showed significant increase in BIC (bone to implant contact) according to increase in healing period and there was significant increases in groups 2 and 3 (P<.05). 3. BA(bone area) ratio showed similar results as contact ratio, but according to statistical analysis there was significant increase according to increase in healing period in group 2 only (P<.05). 4. EPMA analysis revealed no difference in gradation of bone composition of K, P, Ca, Ti in surrounding bone of implants according to healing periods but groups 2 and 3 showed increase of Ca and P in the initial stages. Conclusion: From the results above, it can be considered that alkali and heat treated implants in the atmosphere have advantages in osseointegration in early stages and may decrease the time interval between implantation and functional adaptation.

• Journal of Korean Society of Forest Science
• /
• v.109 no.3
• /
• pp.259-270
• /
• 2020

Extreme weather events, such as heat and drought, have occurred frequently over the past two decades. This has led to continuous reports of cases of forest damage due to physiological stress, not pest damage. In 2014, pine trees were collectively damaged in the forest genetic resources reserve of Sogwang-ri, Uljin, South Korea. An investigation was launched to determine the causes of the dieback, so that a forest management plan could be prepared to deal with the current dieback, and to prevent future damage. This study aimedto 1) understand the topographic and structural characteristics of the area which experienced pine tree dieback, 2) identify the main causes of the dieback, and 3) predict future risk areas through the use of machine-learning techniques. A model for identifying risk areas was developed using 14 explanatory variables, including location, elevation, slope, and age class. When three machine-learning techniques-Decision Tree, Random Forest (RF), and Support Vector Machine (SVM) were applied to the model, RF and SVM showed higher predictability scores, with accuracies over 93%. Our analysis of the variable set showed that the topographical areas most vulnerable to pine dieback were those with high altitudes, high daily solar radiation, and limited water availability. We also found that, when it came to forest stand characteristics, pine trees with high vertical stand densities (5-15 m high) and higher age classes experienced a higher risk of dieback. The RF and SVM models predicted that 9.5% or 115 ha of the Geumgang Pine Forest are at high risk for pine dieback. Our study suggests the need for further investigation into the vulnerable areas of the Geumgang Pine Forest, and also for climate change adaptive forest management steps to protect those areas which remain undamaged.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.8
• /
• pp.1270-1277
• /
• 2014

This study investigated the quality characteristics of instant rice noodles manufactured with broken rice flour as an application of rice-processed products. We examined the physicochemical characteristics of common rice flour (CRF), broken rice flour (BRF), and CRF mixed with BRF (CBRF). Futhermore, instant rice noodles were manufactured with these three types of rice flour, and their quality and sensory characteristics were also investigated. Damaged starch content and water-binding capacity of rice flour were highest in BRF. Particle size of rice flour was significantly different among the three types. RVA pasting viscosities of BRF and CBRF were higher than that of CRF. Volume after cooking of instant rice noodles increased in rice noodles made with broken rice flour (BRN). Turbidity and cooking loss of BRN were higher than those of common rice noodles (CON). For texture properties, CON displayed the highest hardness, adhesiveness, and chewiness. In the sensory evaluation, springiness and overall acceptability values of CON were significantly higher than those of other rice noodle types (BRN and CBRN). In conclusion, BRN showed increased cooking loss and turbidity with reduced texture and overall acceptability values. The results of this study suggest that added amount of CRF may significantly increase the overall quality of instant rice noodles prepared with BRF.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.4
• /
• pp.581-592
• /
• 2003

The aim of this study was to evaluate the effect of chemo-mechanical caries removal system($Carisolv^{TM}$, Medi Team, Sweden) for resin adhesion to carious primary and permanent dentin compared with conventional drilling method. The buccal surface of 92 primary molars and 92 permanent molars were used. Exposed dentins were occurred artificial caries. 32 tooth of primary molars and 32 tooth of permanent molars were prepared to observe treated dentin surface with $Carisolv^{TM}$ and conventional drilling method by SEM. Other tooth were prepared to measure resin-dentin shear bonding strength according to caries removal methods and dentin adhesive system. Two adhesive systems and a composite resin were used; single bonding agent(Scotchbond Multi-Purpose Plus, 3M) and self-etching bonding system(Prompt L-pop, 3M ESPE), and a composite resin (Z-250, 3M). The results were as follows : 1. The removal effect of carious dentin on $Carisolv^{TM}$ was stronger on the primary dentin than that to permanent dentin, and dentin surface became rougher with treated $Carisolv^{TM}$ than drilling method. 2. Acid-etched dentin surfaces were showed smoothening without smear layer. 3. In specimen applied single bonding system hybrid layer and adhesive layer were $2-4{\mu}m$ and $10-15{\mu}m$ in thickness, whereas self-etching bonding system were showed only thin hybrid layer($1-2{\mu}m$). 4. The shear bonding strength of group applied single bonding agent was higher than that applied self-etching priming system(P<0.05). 5. The shear bonding strength of group applied $Carisolv^{TM}$ and self-etching priming system were slightly higher than that applied conventional drilling method and self-etching priming system(P>0.05).

• Journal of The Korean Association For Science Education
• /
• v.33 no.2
• /
• pp.425-443
• /
• 2013

We developed problem-solving type inquiry learning programs reflecting scientists' research process and analyzed the activities of science-gifted high school students, and the understanding and the effects of the programs after implementation in class. For this study, twelve science-gifted students in the 10th grade participated in the program, which consisted of three different modules - making a cycloidal pendulum, surface growth, and synchronization using metronomes. Diet Cola Test (DCT) was used to find out the effect on the improvement of the ability to design experiments by comparing pre/post scores, with a survey and an interview being conducted after the class. Each module consisted of a series of processes such as questioning the phenomenon scientifically, designing experiments to find solutions, and doing activities to solve the problems. These enable students to experience problem-solving type research process through the program class. According to this analysis, most students were likely to understand the characteristics of problem-solving type inquiry learning programs reflecting the scientists' research process. According to the students, there are some differences between this program class and existing school class. The differences are: 'explaining phenomenon scientifically,' 'designing experiments for themselves,' and 'repeating the experiments several times.' During the class students have to think continuously, design several experiments, and carry them out to solve the problems they found at first. Then finally, they were able to solve the problems. While repeating this kind of activities they have been able to experience the scientists' research process. Also, they showed a positive attitude toward the scientists' research by understanding problem-solving type research process. These problem-solving type inquiry learning programs seem to have positive effects on students in designing experiments and offering the opportunity for critical argumentation on the causes of the phenomena. The results of comparing pre/post scores for DCT revealed that almost every student has improved his/her ability to design experiments. Students who were accustomed to following teacher's instructions have had difficulty in designing the experiments for themselves at the beginning of the class, but gradually, they become used to doing it through the class and finally were able to do it systematically.

• Culinary science and hospitality research
• /
• v.18 no.5
• /
• pp.267-278
• /
• 2012

The purpose of this study was to investigate the quality characteristics of Sulgidduck made with commercial dry rice powder, providing an optimal milk ratio and soaking time for dry powder in water to make Sulgidduck using dry rice powder. The Sulgidduk samples with dry rice powder were prepared with two soaking times (0, 30 min) and different amounts of milk (0, 20, 40, 60%), and analyzed for moisture content, Hunter's color value, texture characteristics and sensory evaluation. The moisture content of the samples ranged from 36.37% to 39.80% and the highest moisture quantity was showed in the group with 20% of milk and 30min of soaking time(SM20). The L-value was the highest in the group with 20% of milk and 0min of soaking time(M20). The b-value was increased with the amount of milk and soaking time increased, showing the highest in the group with 60% of milk and 30min of soaking time(SM60). TPA showed that SM20 had the lowest hardness and the highest adhesiveness. Chewiness, gumminess and cohesiveness were the highest in the group with 60% of milk and 0min of soaking time(M60). Based on quantitative descriptive sensory evaluations, the score of white color and moistness was showed high in the group with 0% of milk and 0min of soaking time(M0), and white powder on the surface was shown the most in the group with 20% of milk and 30min of soaking time(SM20). The score of moistness, springiness and chewiness were highest in the group with 20% of milk and 0min of soaking time(M20). Sulgidduk made with 20% of milk and 0min of soaking time(M20) was the most preferable in color, flavor, taste, and overall acceptability.

• Culinary science and hospitality research
• /
• v.21 no.4
• /
• pp.16-28
• /
• 2015

The purpose of this study, as a part of developing a new french dressing, was to present the best conditions to make improved kiwi dressing, suitable for the tastes of modern people, the processing and cooking methods of different ratios of green kiwi and gold kiwi have been sought to develop a new type of dressing, then its antioxidant have been defined, and used for producing kiwi dressing. Each 150g of different Kiwi purees, made based on the most preferable combinations from the pre-test were used for kiwi dressing, and thereafter its quality characteristics, and physical properties were investigated, as well as a sensory test was conducted. The highest viscosity of kiwi dressing was test sample GD2, and in general that of combining both types of kiwis were higher than that of either single kiwi. The sugar content was decreased by changing the Gold kiwi portion(p<0.05). The chromaticity in general increased with increases in the Gold kiwi portion, and a-value(brightness) and b-value(redness) of sample GD1 were the highest by -2.75 and 17.50(p<0.05). From the acceptability test, the highest overall acceptability was the dressing sample combining Gold kiwi and Green kiwi at a ratio of 1:1. Based on the study results, it is expected that the dressing, made of kiwi puree, mixing Green kiwi and Gold kiwi by 1:1 ratio, and adding 130g of edible oil, 50g of onion, 40g of sugar, and 5g of salt, would improve the quality and overall acceptability of the dressing.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.6
• /
• pp.1277-1283
• /
• 1998

Background : Surgical tracheostomy(ST) is usually performed by surgeons in operating room. For a patient with mechanical ventilation, however, transportation to operating room for ST could be dangerous for patients. In addition, ST is often delayed due to unavailability of operating room or surgeon. Percutaneous dilatational tracheostomy(PDT), although novel in Korea, is gaining popularity as a bedside procedure in the hospitals of western countries. We evaluated the technical ease and safety of PDT in comparison with ST. Method : Thirty-eight patients in medical intensive care unit (ICU) who were either under mechanical ventilation for more than 7 days or required airway protection, were randomly assigned to ST(18 patients) or PDT(20 patients). Between two groups, there was no significant clinical difference except that female to male ratio was higher in the ST group. ST was performed by second year residents of the department of otolaryngology while PDT was performed by third grade medical resident and pulmonologist under bronchoscopic guide using Ciaglia Percutaneous Tracheostomy Set(Cook Critical Care, Bloomington, USA) in medical ICU. The following factors were compared between two groups : number of delayed cases after the decision for tracheostomy, procedural time, complications related to tracheostomy. Results : Delayed cases were 11 in ST group and 3 in PDT group (P<0.05). Procedural time was significantly shorter in PDT group ($15.6{\pm}7.1min$) than in ST group ($29.1{\pm}11.6min$, P<0.0001). Complications related to tracheostomy occurred in 5 cases in ST group : accidental decannulation (1), subcutaneous emphysema (2) and minor bleeding (2), and in 4 cases in PDT group : minor bleeding (2), subcutaneous emphysema (1) and premature extubation (1) (P>0.05). Conclusion : Since percutaneous dilatational tracheostomy was easy to practice and its complications were not different from surgical tracheostomy, PDT can be a useful bedside procedure for mechanically ventilated patients.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.4
• /
• pp.805-812
• /
• 1998

Background: Among the variety of opportunistic infections, pneumonia comprises the major morbidity in immunocompromised patients. Pneumocystis carnii pneumonia (PCP) and cytomegalovirus (CMV) pneumonia are common infectious illness of immunocompromised hosts. Although there are many reports regarding to the co-infection of PCP and CMV diagnosed by bronchoalveolar lavage (BAL) fluid examination, the effects of CMV co-infection on the outcome of PCP is still controversial. The purpose of this investigation is to evaluate the effects of CMV detected by BAL fluid examination on the clinical course of PCP in the immunocompromised patients other than human immunodeficiency virus infection. Method: Ten patients with PCP were enrolled and retrospective analysis of their medical records were done. HIV infected persons were excluded. The PCP was diagnosed by BAL fluid examination with Calcofluor-White staining. CMV was detected in BAL fluid by Shell-vial culture system. Chest radiographic findings were reviewed. We used Fisher's exact test and Mann-Whitney U test for statistical analysis of data. Results: The underlying disorders of patients were idiopathic pulmonary fibrosis (n=1), renal transplantation (n=4), necrotizing vasculitis (n=l), systemic lupus erythematosus (n=1), brain tumor (n=1), chronic myelogenous leukemia (n=1), unidentified (n=1). There were no difference in clinical course, APACHE III score, arterial blood gas analysis, white blood cell count, lymphocyte count, serum albumin concentration, chest radiographic findings and mortality between patients with PCP alone (n=4) and those with CMV co-infection (n=6). Univariate analysis regarding to the factors that associated with mortality of PCP were revealed that the application of mechanical ventilation (p=0.028), the level of APACHE III score (p=0.018) and serum albumin concentration (p=0.048) were related to the mortality of patients with PCP. Conclusion: The clinical course of PCP patients co-infected by CMV were not different from PCP only patients. Instead, accompanied respiratory failure, high APACHE III score and poor nutritional status were associated with poor outcome of PCP.

• Tuberculosis and Respiratory Diseases
• /
• v.45 no.6
• /
• pp.1223-1235
• /
• 1998

Background and Objective : Although prone positioning has been reported to improve gas exchange, prone positioning alone does not seem to be sufficient to increase systemic oxygen transport in an acute lung injury. The objective of this study was to investigate whether the combined therapy of low dose nitric oxide (NO) inhalation and prone positioning has an additive effect on the oxygenation and hemodynamics in patients with severe ARDS. Patients and Methods : Twelve patients with ARDS were included. Prone positioning alone, later combined with nitric oxide inhalation (5~10 ppm) from the supine position (baseline) were performed with serial measurement of gas exchange, respiratory mechanics and hemodynamic at sequential time points. The patient was regarded as a responder to prone positioning if an increase in $PaO_2/FiO_2$ of more than 20 mm Hg at 30 min or 120 min intervals after prone positioning was observed compared to that of the baseline. The same criterion was applied during nitric oxide inhalation. Results : Eight patients (66.5%) responded to prone positioning and ten patients (83.3%) including the eight just mentioned responded to the addition of NO inhalation. The $AaDO_2$ level also decreased promptly with the combination of prone positioning and NO inhalation compared to that of prone positioning alone ($191{\pm}109$ mm Hg vs. $256{\pm}137$ mm Hg, P<0.05). Hemodynamic parameters and lung compliance did not change significantly during prone positioning only. Following the addition of NO inhalation to prone positioning, the mean pulmonary artery pressure and pulmonary artery occlusion pressure decreased and cardiac output, stroke volume and oxygen delivery increased (P < 0.05) compared to those of prone 120 min. Conclusion : These findings indicate that NO inhalation would provide additional improvement in oxygenation and oxygen transport to mechanically ventilated patients with ARDS who are in a prone position.