• Journal of the Korean Geosynthetics Society
• /
• v.20 no.2
• /
• pp.45-56
• /
• 2021

As the utilization of the underground space is activated, deep excavation of ground has been conducted for the installation of underground structures, the earth retaining wall has widely used to minimize deformation of the excavated ground. In particular, as deep excavation is actively progressing in an urban area where structures are concentrated, methods to minimize the deformation of wall have been devised to prevent damage to the structure adjacent to the wall, and one of these methods is the pre-loading method. This method is a method of suppressing the deformation of wall by actively applying a load on the strut to be installed in wall, and research on this method has been conducted recently. However, although related studies have been actively conducted, the management standard for the pre-loading of bracing has not been clearly presented until now. In addition, since the working force in the strut may increase depending on the depth of excavation or the soil condition of the backfill, the magnitude of the pre-loading that can be applied to the brace may decrease. Nevertheless, the magnitude of the pre-loading (more than 50% of the working load) proposed by the previous research results has been uniformly applied to the strut. In this study, 3D finite element analysis was performed to evaluate the application range of the pre-loading of H-beam strut according to the soil conditions of backfill. As a result of the analysis, it was found that there is a very high possibility that a problem may occur in the stability of the structure of strut due to the earth pressure and the pre-loading when the soil condition is weak and deep excavation proceeds. And it was found that the application range of the pre-loading was 5%~70% of the working load in strut.

• The Journal of Engineering Geology
• /
• v.18 no.1
• /
• pp.55-68
• /
• 2008

At present underground structures such as road tunnels, railway tunnels, underground petroleum storages and radioactive waste storages are being constructed in numerous places in Korea. For the construction of underground structrues, it should be accounted for natural factors (geology, hydrogeology, soil, vegetation, topography and drainage patterns) and human-social factors (land use, urbanization, population, culture and transportation). Especially, hydrogeology should be regarded as an important factor for evaluating the safety of underground structures and their impact to groundwater system around the structures. This study aimed to recognize hydrogeological characteristics of shallow formations in the area from Dongrae crossway to Seo-Dong where 45 boreholes were drilled for the construction of Line-3 subway in Busan Megacity. Slug tests for unsaturated and saturated zones were conducted on 30 boreholes in the study area. From the result of the slug tests, it was identified that average zonal hydraulic conductivity in the unsaturated zone was higher than that in the saturated zone. Besides, the slug test result in the saturated zones may reflect hydraulic properties of the upper most part of the saturated zones.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2016.11a
• /
• pp.110-110
• /
• 2016

금속재료 중 철강은 기계적 성질이 우수하고 대량생산에 의한 뛰어난 경제성을 가지기 때문에 다양한 산업 분야에서 널리 사용되고 있다. 그러나 스테인리스강 등과 같은 일부 특수한 용도의 강을 제외하고는 부식 환경에 취약하기 때문에 그 용도에 따라 표면처리를 함으로서 내식특성을 부여하고 있다. 일반적으로 이러한 철강재료에 대한 부식문제를 해결하기 위한 방법으로는 습식프로세스 중 아연(Zn)도금이 사용되는데, 아연은 그 자체가 보유하고 있는 차폐(barrier)효과는 물론 상대적으로 이온화 경향이 크기 때문에 철에 대하여 전자를 공급하는 희생양극적(Sacrificial anode)역할을 하여 철을 방식하는 원리를 가지고 있다. 하지만 최근에 이르러 기존의 도금 프로세스 처리된 제품의 사용 및 적용분야가 확대되고 가혹해 짐에 따라서 내식성 향상을 위한 새로운 재료 및 신기술 개발이 요구되고 있는 실정이다. 본 연구에서는 친환경 프로세스 방법인 PVD법 중 하나인 스퍼터링(Sputtering)을 이용하여 0.8mm 두께의 냉연강판 (cold rolled steel) 상에 Al에 대한 Mg 함량을 10~30wt.%로 하여 약 $5{\mu}m$ 두께의 막을 제작하였다. 이때 20wt.% 막의 경우 공정압력조건을 증가시켜 증착 막의 결정배향성을 변화시켰다. 뿐만 아니라 제작된 막들에 대해서 $400^{\circ}C$온도에서 10분간 열처리함으로서 코팅막의 성분변화에 따른 영향을 살펴보기 위해 시편을 추가 제작하였다. 이와 같이 제작된 막들에 대한 형성메커니즘과 내식성의 상관관계 해명을 위해 막의 조성분포, 표면 및 단면의 모폴로지 관찰 및 결정구조 등 재료특성분석과 더불어 염수분무(Salt spray test), 침지시험 그리고 양극분극 시험 등을 통해 내식성 평가를 진행하였다. 이상의 종합적인 결과를 살펴보면 제작된 Al-Mg 막은 마그네슘 함량비 및 열처리 조건에 따라 조성분포와 막의 모폴로지 및 결정배향성이 변화한다는 것을 알 수 있었는데, 마그네슘 함량이 증가하고 열처리한 막의 내식성이 가장 양호한 것으로 나타났다. 이것은 Al-Mg 성분이 표면을 중심으로 균일 분산-분포하며, Al에 대한 Mg의 고용으로 인해 안정적으로 형성된 부식생성물과 금속화합물의 단계적 반응 효과에 의해 차폐효과와 희생양극적 특성이 동시에 향상되었기 때문으로 생각된다. 한편 공정 압력을 증가시켜 형성한 막은 결정학적 구조에서 보다 높은 표면 에너지와 증가한 격자 정수에 의해 Mg이 부식환경에서 빠르게 반응하여 안정적 피막을 형성하기 때문에 내식성이 향상된 것으로 보여 진다. 이상의 연구를 통해서 고내식성을 Al-Mg막의 유효성 확인하였으며, 설계에 대한 기초적인 응용지침을 제시할 수 있을 것으로 사료된다.

• Tunnel and Underground Space
• /
• v.14 no.1
• /
• pp.69-77
• /
• 2004

Investigation of the time-dependent behavior of rock and the associated mechanisms are of key interest in long-term stability analysis of many engineering applications. In this study, creep tests were performed on Daejeon granite samples of 25.4mm diameter under uniaxial compression at varying stress levels. The effect of moisture was investigated by testing both air-dried and fully water-saturated samples. The creep behavior of Daejeon granite exhibited three distinctive stages of primary, secondary and tertiary creep. The ultimate strength of granite under a constant stress decreased considerably with time. Saturation and immersion of the test specimen in water markedly increased the total creep strain as well as the secondary creep rate. The experimental creep curves are fitted to Burger's model as well as two other empirical models suggested by previous researchers. A number of the parameters determined for each model are dependent on stress and influenced by the presence of water. Based on the experimental results, an empirical relation between the applied stress and the time-dependent strain is established separately for each air-dried and fully water-saturated Daejeon granite.

• Journal of Korea Water Resources Association
• /
• v.37 no.9
• /
• pp.707-718
• /
• 2004

This study is to analyze the Probable Maximum Flood(PMF) as a part of counterplan for the disaster prevention of hydraulic structures such as dams, according to recent unfavorable weather conditions. During the period of typhoon RUSA in August 2002, the rainfall recorded in Gang-loeng Province was 880mm a day and exceeded the scale of PMP made in 2001. Accordingly, the reconsideration of hydrologic criteria for dam design was inevitable. In the design of dams for flood controls, the design flood must be determined by introducing the concept of maximum values. When the duration of design rainfall is determined, it needs to use the critical duration which causes the maximum flood by the maximum runoff. In this study, we Investigate the variation of critical duration with hydrologic parameters used in three different synthetic unit hydrographs(Clark, Nakayasu and SCS methods). As a result, the total runoff calculated from 24-hour duration is larger than that calculated from the critical duration. We calculate also the hydrographs with three different time distribution models(Huff's 4-quartile, IDF curve and Mononobe) and compare those with measured hydrograph data. From this comparison, we propose that the Huff's 4-quartile model must be used to obtain the desirable data in the hydrologic design of dams.

• Tunnel and Underground Space
• /
• v.32 no.5
• /
• pp.312-326
• /
• 2022

The generalized Hoek-Brown (GHB) criterion, which is recognized as one of the standard failure conditions for rock mass, is specialized for rock engineering applications and covers a wide range of rock mass conditions. Accordingly, many research efforts have been devoted to the incorporation of this criterion into the stability analysis of rock structures. In this study, the slip-line analysis method, which is a kind of elastoplastic analysis method, is combined with the GHB failure criterion to derive analytical equations that can easily calculate the plastic radius and stress distribution in the vicinity of the circular tunnel. In the process of derivation of related formulas, it is assumed that the behavior of rock mass after failure is perfectly plastic and the in-situ stress condition is hydrostatic. In the formulation, it is revealed that the plastic radius can be calculated analytically using the two respective tangential friction angles corresponding to the stress conditions at tunnel wall and elastic-plastic boundary. It is also shown that the plastic radius and stress distribution calculated using the derived analytical equations coincide with the results of Lee & Pietruszczak's numerical method published in 2008. In the latter part of this paper, the influence of the quality of the rock mass on the size of the plastic zone, the stress distribution, and the change of the tangential friction angle was investigated using the derived analytical equations.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.368-368
• /
• 2017

근대적 기상관측이 시작된 1905년 이후 우리나라의 연평균 강수량은 증가하고 있으나 강수량 변동폭 또한 커지면서 최갈수 기간의 영향을 받는 댐 등 대규모 수공구조물의 용수공급능력은 감소되고 있다. 또한 지역별 강수량과 인구 편차로 공간적으로 이용 가능한 수자원의 불균형이 발생하고 있어 지역적인 물 공급의 안정성과 형평성은 여전히 취약한 상황이다. 하지만 사회적 공감대 형성이 쉽지 않은 대규모 수자원개발 추진은 어려운 여건이며 국민들의 안전하고 맑은 물에 대한 수요 또한 지속적으로 증대되고 있어 이를 해소하기 위한 다각적인 대책 마련이 필요한 상황이다. 본 연구에서는 기 확보된 수자원의 효율적이고 공평한 활용을 위해 국내 용수공급의 중추적인 역할을 담당하고 있는 댐을 대상으로 댐간 연결을 통한 용수공급 방안을 제시하였다. 이를 위하여 소양강댐, 충주댐 등 다목적댐 16개 및 광동댐, 영천댐 등 용수댐 12개 총 28개댐의 용수공급능력 평가와 장래 용수수요량 조사를 실시하였으며 장래 용수부족 지역 해소를 위한 상시공급과 극한가뭄 등 재난 대처를 위한 비상시공급 방안을 검토하였다. 상시공급은 댐 용수공급능력 평가를 통하여 기본계획공급량 대비 여유수량을 갖는 댐에서 장래 용수수요 증가, 용수공급능력 감소 등으로 공급 용수가 부족한 인근 댐으로 공급하는 방식이며 용수 공급량은 저수지 모의운영을 통하여 양댐의 이수안전도(분석 기간중 1회에 한하여 물 부족 허용)를 충족시키는 수량을 산정하였다. 비상시공급은 타수계 및 근거리간 연결, 가뭄 예상지역을 기준으로 대상 댐을 검토하였으며 용수 공급량은 공급댐의 유지용수와 관개용수를 이용하여 공급받는 댐의 생 공용수 20% 공급가능시 공급량으로 산정하였다. 검토 결과 상시공급은 소양강댐에서 횡성댐으로 86천$m^3$/일, 장흥댐에서 주암본댐으로 127천$m^3$/일, 남강댐에서 수어댐으로 $140m^3$/일, 비상시 공급은 충주댐과 대청댐, 충주댐과 안동댐간 각각 500천$m^3$/일 공급을 통하여 장래 용수부족 지역의 물 부족 해소와 극한가뭄 등 비상상황의 대처가 가능한 것으로 분석되었다. 본 연구는 기후변화와 사회가치적으로 변화하고 있는 수자원 환경에 능동적으로 대처하기 위한 대책의 일환으로 고안된 것이며, 향후 유역간 물 이동에 따른 현행 수리권제도 및 어류, 수질변화에 따른 환경영향 등에 대하여 추가적인 연구가 필요할 것으로 판단된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.28 no.2
• /
• pp.27-34
• /
• 2024

This study was conducted to examine the feasibility of using Fe-activated wood-derived biochar as a conductive filler for manufacturing cement-based strain sensor. To evaluate the compressive and electrical properties of cement composite with 3% Fe-activated biochar, three cubic specimens of size 50 x 50 x 50mm³ and three prismatic cement-based sensors of size 40 x 40 x 80mm³ were prepared respectively. The four-probe method of electrical resistance measurement was used for cement-based sensors. For cement-based sensors with FE-activated biochar, the conductive performance such as electrical resistance and impedance under different water content and repeated compression was investigated. Results showed that the fractional changes in the DC electrical resistivity of cement-based sensors increase with increasing time and the maximum fractional changes in the resistivity decrease with increasing the moisture contents during 900s. At moisture content of 7.5% range, the conductive performance of cement composite including 3% Fe-activated biochar as a conductive filler showed the most stable, while the strain detection ability tended to decrease somewhat as the repeated compressive stress increased between repeated compressive strain and fractional change in resistivity (FCR).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.12
• /
• pp.7443-7450
• /
• 2014

To resolve shortcomings of high-rate anaerobic processes, such as high upward flow velocity, this study sought to improve the structure of the high-rate anaerobic reactor and evaluate its performance. The improved reactor was manufactured by adjusting the diameter and dividing the reactor into three parts. The evaluation of the structurally improved reactor revealed that the reactor could stabilize a single circuit, and prevent the accumulation of solid matter and leakage of microbes, thereby stabilize the microbes. In the process of anaerobic digestion, an increase in pH and alkalinity within the reactor was presumably attributed to bicarbonate created in the process of organic matter decomposition and due to the re-dissolution of some biogas. To maintain a high rate of organic matter removal, the reactor should be operated with more than 9 hrs of HRT and an organic matter load of under $10.kgTCODcr/m^3{\cdot}d$. The methane gas generated in the anaerobic digestion process showed a high content of 65~83 % at the organic matter load of over $7.7kgTCODcr/m^3{\cdot}d$. per removal of CODcr. The methane quantity was generated at $0.10{\sim}0.23m^3CH_4/kgCOD_{rem}$, showing that it was smaller than the theoretical methane generation amount (0.35) in the STP state. In the latter part of high-rate anaerobic process, an advanced treatment process was required to remove nitrogen.

• Korean Journal of Heritage: History & Science
• /
• v.53 no.4
• /
• pp.78-99
• /
• 2020

The Buddha triad and 16 Arhat statues carved on the rock surface at Seongbulsa temple is the only domestic remaining example of all 16 Arhats, so its academic value is very high. However, it is severely damaged and so required a stability evaluation through study of digital documentation and precise diagnosis for the purpose of comprehensive conservation. This process established that the Buddha statues were of similar scale, while the Arhats showed a wide variety of sizes, and the two kith and kin in the volume were larger than the Arhats. It was estimated that the statues of food for Buddha are similar to the Arhat statues, and most of the statues are well-formed. The rock used to carve the Buddha statues is banded gneiss with distinct foliation, alternating between white bands of quartz and feldspar and black bands composed of biotite. The Buddha statues have been damaged by physical weathering, discoloration, and biological contamination. In damage evaluations, joint (3.6 crack index), peeling (5.2%), exfoliation (1.7%), and falling off (0.1%) were observed on the rock surface of the Buddha statues. In particular, due to severe biological weathering, stage 9 and 10 biological coverage of the rock surface accounted for 57.5% of the total area, and stages 5 to 8 also accounted for a high share at 22.3%. The discoloration factors were shown to be dark brown and white with Fe, Ca, and S, and a large amount of C detected in the blackened contaminants, and the damage weight high in all areas. Discontinuities in different directions were identified in the rock surface. Analysis of potential rock failure types indicated that there is a possibility of plane and toppling failure, but wedge failure is unlikely to occur. The mean ultrasonic velocity of the main rock surface was 2,463m/sec, the lower part of the left side with a large number of joints was relatively low, and the highly weathered (HW) type to the completely weathered (CW) type concentrated distribution, showing weak properties. For the Buddha statues, conservation treatment is required for about 14.9% of micro cracks and 58.9% of exfoliation cracks. In addition, in order to improve the conservation environment of the Buddha statues, maintenance of drainage and ground preparations for the rock surface gradient and plants are necessary, and protection facilities should be reviewed for long-term conservation and management purposes.