• Title/Summary/Keyword: 구연산염

Search Result 14, Processing Time 0.025 seconds

Addition of Salts and Their Mixtures for Improvement of Storage Stability of Kimchi (김치의 저장성 향상을 위한 염혼합물의 첨가)

  • Kim, Woo-Jung;Kang, Kun-Og;Kyung, Kyu-Hang;Shin, Jae-Ik
    • Korean Journal of Food Science and Technology
    • /
    • v.23 no.2
    • /
    • pp.188-191
    • /
    • 1991
  • A study was carried out to investigate the control effect of sodium and potassium phosphates, sodium citrate and three different salts mixtures on kimchi fermentation when they were added into half-fermented kimchi in the concentration range of $0.001{\sim}0.01\;M$. The salts mixtures added were sodium phosphates mixture(CA-A), addition of $NaNO_2$, Ca-EDTA and BHA to CA-A(CA-B) and substitution of BHA with sodium citrate in CA-B. The results showed that sodium phosphates and sodium citrate significantly inhibited the kimchi fermentation while potassium phosphate had little effect. The order of control effect was $Na_3PO_4-Na_2HPO_4-sodium\;citrate-NaH_2PO_4-K_2HPO_4-KH_2PO_4$. Among the salts mixtures, CA-A showed the most reducing effect in the fermentation rate followed by CA-C and CA-A. The mixture of CA-C could extend the time of holding pH $4.2{\sim}4.4$ by approximately 6 times at $4{\sim}25^{\circ}C$ when it was compared to control. The microbial growth study of total and Leuconostoc mesenteroides also showed a very significant decrease in their numbers.

  • PDF

Synthesis and Electrochemical Properties of LiFePO4 by Citrate Process (구연산염법을 이용한 LiFePO4 합성 및 전기화학특성에 관한 연구)

  • Kim, Soo-Min;Kim, Sang-Hun;Kim, Jin-Ho;Kim, Ung-Soo;Hwang, Hae-Jin;Cho, Woo-Seok
    • Journal of Hydrogen and New Energy
    • /
    • v.22 no.5
    • /
    • pp.728-734
    • /
    • 2011
  • $LiFePO_4$ is a promising cathode material for secondary lithium batteries due to its high energy density, low cost and safety. $LiFePO_4$ was synthesized by the citrate process under reductive, neutral, and oxidative, atmospheres and the crystal structure was analyzed by X-ray powder diffraction. The samples synthesized under $N_2$ and $H_2$ atmosphere showed a single phase of a olivine structure, where the samples synthesized under $O_2$ atmosphere exhibited second phase of $Fe2O_3$. All the samples synthesized at 400, 600 and $800^{\circ}C$ under $N_2$ atmosphere presented a single phase of olivine. Residual organic material was observed for the sample synthesized at $400^{\circ}C$. There was nearly no intensity difference between the samples synthesized at $600^{\circ}C$ and $800^{\circ}C$. The electrochemical characteristic of the $LiFePO_4$ synthesized at $600^{\circ}C$ in the $N_2$ atmosphere was analyzed. The result exhibited an high discharge capacity of 160 mAh/g at the first cycle, and 155-160 mAh/g after 45 cycles.

The Effect of pH on Citric Acid Leaching of Soil Contaminated with Heavy Metals (중금속(重金屬) 오염토양(汚染土壤)의 구산(枸酸) 침출(浸出)에 대한 pH의 영향(影響))

  • Jung, Kyungbae;Park, Hongki;Yoo, Kyoungkeun;Park, Jay Hyun;Choi, Ui Kyu
    • Resources Recycling
    • /
    • v.22 no.5
    • /
    • pp.13-19
    • /
    • 2013
  • The effect of pH on the citrate leaching behavior of heavy metal ion was investigated to develop an eco-friendly process for removing heavy metals from soil contaminated with copper, zinc, and lead. The leaching tests were performed using citrate solution with pH adjusted by mixing citric acid and sodium citrate under the following leaching conditions: particle size, under $75{\mu}m$; temperature, $50^{\circ}C$; citrate concentration, $1kmol/m^3$; pulp density, 5%; shaking speed, 100 rpm; leaching time, 1 hour. The difference of pH before and after the leaching test was not observed, and this result indicates the direct effect of hydrogen ion concentration on the leaching of metals was insignificant. The removal ratios of copper, zinc, and lead from the contaminated soil decreased with increasing pH. The thermodynamic calculation suggests that the leaching behaviors of metal ions were determined by two reactions; one is the reaction to form complex ions between heavy metal ions and citrate ion species, and the other is the reaction to form metal hydroxide between heavy metal ions and hydroxide ion.

Comparison of Boiling Point and Distillaiion Ranige, Melting Range, and Identification Methods of Various Organizations on Synthetic Food Additives (식품첨가물에 대한 여러 기관의 비점 및 유분측정법, 융점측정법 및 확인시험법 비교)

  • Shin Dong-Hwa;Kim Yong-Suk;Lee Young-Hwan;Bang Jeong-Ho;Om Ae-Son;Shin Jae-Wook;Lee Tal-Soo;Jang Young-Mi;Hong Ki-Hyoung;Park Sung-Kwan;Kwon Yong-Kwan;Park Jae-Seok
    • Journal of Food Hygiene and Safety
    • /
    • v.20 no.3
    • /
    • pp.134-140
    • /
    • 2005
  • Boiling point and distillation range, melting range, and identification methods in general test method of Korea, Japan, Joint FAO/WHO Expert Committee of Food Additives (JECFA), and USA on chemical food additives were compared. Boiling point of propylene glycol was indicated as boiling point in Korea, distillate in Japan, distillation range in JECFA and USA, and its value was up to the standard. Distillation range of propionic acid was indicated as distillate in Korea and Japan, distillation range in JECFA and USA, and its value was up to the standard. There is no standard on distillation range of isopropyl alcohol in Japanese method. Test method of melting range on synthetic food additives was identical in all organizations, and there are 28 items to which this test method applies in Korean Food Additives Code. The standards on molting range of D-mannitol were different in various organizations, and in USA method there are no standards to which L-ascorbic acid, calciferol, and fumaric acid apply. Synthetic food additives performing the identification test were 251 items in Korean Food Additives Code, but there are no items to which manganese, glycerophosphate, bromate, thiosulfate, and bromide apply. Calcium benzoate was dissolved by heating in benzoate test and we could not identify the citrate in ferric citrate by method (2) of Korea and Japan. Identification test methods for ammonium, lactate, magnesium, copper, sulfate, phosphate, and zinc were identical in all organizations, and these could be identifed by current identification methods.

Preparation of Y2O2:Eu Red Phosphor by Sol-Gel and Calcination Process (솔-젤 및 소성공정에 의한 이트륨-유로퓸계 적색형광체 제조)

  • Yoon, Ho-Sung;Kim, Chul-Joo;Jang, Hee Dong
    • Korean Chemical Engineering Research
    • /
    • v.46 no.3
    • /
    • pp.506-511
    • /
    • 2008
  • In this study sol-gel and combustion process was surveyed for the preparation of the red $Y_2O_3$: Eu phosphor, and the properties of phosphor was considered. Chelation and hydrolysis in amorphous citrate sol-gel process were completed in initial reaction stage, and water-forming condensation was superior to organic acid-forming condensation. The mole ratio of citric acid to metal ion had to be above to for the progress of sol-gel process. The dried gel powders are mostly amorphous, and crystallize completely at $700^{\circ}C$, and the crystallinity increases with increasing calcining temperature. The luminescence property of the phosphor was analyzed by measuring the emission spectra. The luminescence intensity increases when the calcination temperature and concentration of metal ions in solution increase.

Effect of Carbon on Electrode Characteristics of $LiCoO_2$ Resynthesis ($LiCoO_2$의 재합성시(再合成時) 전극특성(電極特性)에 미치는 탄소(炭素)의 영향(影響))

  • Lee, Churl-Kyoung;Park, Jeong-Kil;Sohn, Jeong-Soo
    • Resources Recycling
    • /
    • v.16 no.6
    • /
    • pp.10-19
    • /
    • 2007
  • The mechanical process followed by hydrometallurgical treatment has been developed in order to recover cobalt and lithium from spent lithium ion battery. In the previous study, a citrate precursor combustion process to prepare cathodic active materials from the leaching solution was elucidated. Resynthesis of electrode materials should be more valuable in spent battery recycling. Conventional slurry mixing of $LiCoO_2$ and carbon cannot make uniform distribution, and therefore the cathode cannot reach the theoretical charge-discharge capacity and is easily degraded during the charge-discharge cycling. In this study, ultra-fine $LiCoO_2$ powders has been prepared by modification of the combustion process and fabricated the enhanced cathode by modification of mixing method of $LiCoO_2$ and carbon added.

Effect of the Extraction Conditions on the Quality Improvement of Mussel Extracts (추출조건이 홍합 추출물의 품질에 미치는 영향)

  • An, Kyung-Hee;Kim, Jong-Gun;Ko, Soon-Nam;Kim, Woo-Jung
    • Korean Journal of Food Science and Technology
    • /
    • v.31 no.4
    • /
    • pp.1017-1023
    • /
    • 1999
  • Several extraction conditions of mussel were investigated for preparation of the extract as a natural shellfish seasoning. The conditions studied were extraction temperature and time, addition of sodium phosphates and citrate and hydrolysis with commercial proteolytic enzymes. The extracts were prepared by deshelling, grinding and aqueous extraction followed by centrifugation and filtration. Extraction at $90^{\circ}C$ for 40min showed the highest solids yield with less fishy and high umami taste. Among the several phosphates and citrate added, $Na_{3}PO_{4}$ and $Na_{4}P_{2}O_{7}$ at 1% level were most effective in terms of the yield and umami taste. The pH effects showed that pH 10 resulted the highest solids yield of 28% with less fishy taste. Even though the effect of enzymatic hydrolysis was not greatly different among the commercial enzymes tested, Protamex and Protease II were somewhat better than other enzymes in taste. When the mussel were extracted by the combined conditions, hydrolysis with Protamex followed by extraction at $90^{\circ}C$ for 40min with addition of $Na_{3}PO_{4}$ at pH 10, the solid yields increased up to 30% which was about 58% improvement and high intensity of umami taste and less fishy flavor.

  • PDF

Effect of Combined Salts Addition on Physical and Sensory Properties of Kimchi (염혼합물의 첨가가 김치의 물리적 및 관능적 특성에 미치는 영향)

  • Ku, Kyung-Hyung;Kang, Kun-Og;Chang, Young-Sang;Kim, Woo-Jung
    • Korean Journal of Food Science and Technology
    • /
    • v.23 no.2
    • /
    • pp.123-128
    • /
    • 1991
  • Addition of two different salt mixtures of sodium phosphates, Ca-EDTA, $NaNO_2$ and sodium citrate were investigated for their effects on relative viscosity, textrue, sensory properties of kimchi and solids contents of kimchi and kimchi liquid during fermentation at $4{\sim}3.5^{\circ}C$. The salt mixtures were added into half fermented kimchi with the concentration range of $0.001{\sim}0.01\;M$. The results showed that higher values in viscosity of kimchi liquids were obtained for those fermented at low temperature and with salts mixtures added. The hardness of Chinese cabbage was gernerally increased until pH 4.0 reached and then decreased thereafter for those fermented without salts mixture. However the salts added kimchi showed no decrease and a slightly harder texture measured at the late stage of fermentation. Soluble solids concentration steadly decreased in kimchi liquids for those salts mixture added while those without salts mixture were initially increased followed by slow decrease. Comparison of sensory properties showed that the degree of changes was reduced when salt mixture was added. Higher scores in fresh-sourness and acidic taste, hardness and chewiness in texture and lower moldy odor were obtained when the data was compared for those kimchi having the pH range of $4.0{\sim}4.2$.

  • PDF

High Tc Superconductor Fiber $YBa_2Cu_3O_{7-{\sigma}}$ Synthesized by the Sol-gel Process (Sol-gel 법에 의한 고온 초전도체 $YBa_2Cu_3O_{7-{\sigma}}$ 선재 합성에 관한 연구)

  • Jin Ho Choy;Jong Seok Yoo;Bae Whan Kim;Seung Tae Hong
    • Journal of the Korean Chemical Society
    • /
    • v.33 no.3
    • /
    • pp.326-331
    • /
    • 1989
  • Superconducting fiber of high Tc $YBa_2Cu_3O_{7-{\sigma}}$ was successfully prepared by the sol-gel method. The stoichiometric mixture of Y, Ba and Cu nitrates was dissolved in water, to which citric acid solution was added. Then ammonium hydroxide was added to the mixture in order to increase the pH to a value between 5.8 and 6.2. The mixture was heated carefully to form a homogeneous colloid sol at 358 K. The solution was viscous enough to draw a long gel fiber, which was then heated at 1223K for 8 hrs. under oxygen partial pressure of $Po_2$ = 1 atm., cooled slowly and annealed at 723K for 13 hrs.. The reacted superconducting sample maintained a fiber form with some shrinkage of its volume. The superconducting transition temperatures (Tc, onset and Tc, offset) of $YBa_2Cu_3O_{7-{\sigma}}$ have been determined to be approximately 95K and 82K, respectively. The superconducting phase was also confirmed by Meissner effect at liquid nitrogen boiling temperature.

  • PDF

Combined effects of salts mixture addition and microwave heating on storage stability of Kakdugi (깍뚜기의 저장성 향상을 위한 순간 열처리 및 혼합염 첨가의 병용효과)

  • Kim, Jong-Koon;Yun, Jung-Won;Lee, Jung-Kun;Kim, Woo-Jung
    • Applied Biological Chemistry
    • /
    • v.34 no.3
    • /
    • pp.225-230
    • /
    • 1991
  • In this study, several combined effect of KCl addition into bring solution, microwave heating of Chinese radish for 3 minutes and addition of two salt mixtures into half fermented Kakdugi were investigated to compare their improving effects of storage stability of Kakdugi, Kakdugi was prepared by salting in 15% NaCl solution for 2 hours and fermented at $25^{\circ}C$ and determined for the changed in pH, total acidity and reducing sugars. It was found from the result that the combined method of salts addition and heating treatment improved the storage stability by 6.4 folds based on pH change where salts mixture of phosphated, Ca EDTA, and Sod. citrate contributed the most effect. Changed in reducing sugar were greatly reduced by salt mixture addition while microwave heating and KCl addition affected little. Storage of Kakdugi at $4^{\circ}C$ after preparation with combined method could extend the storage life more than 8 folds of those Kakdugi stored at $25^{\circ}C$. However total acidity showed higher values for those prepared by combined method and stored at $4^{\circ}C\;or\;25^{\circ}C$.

  • PDF