• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.10
• /
• pp.841-847
• /
• 2021

In this paper, the applicability of the low-density surface film copper mesh for aircraft applications have been analyzed. Recently, low-density surface film copper mesh is developed to reduce weight and cost compared with traditional surface film copper mesh. In order to apply low-density surface film copper mesh to aircraft, it is needed to analyze its electromagnetic effects as well as structural integrity with sandwich panels to prevent pinholes. The structural integrity and electromagnetic characteristics have been analyzed for 2 samples of low-density surface film copper mesh and 1 sample of surface film copper mesh. To review the applicability of the low-density surface film, it is combined with sandwich composite panel to confirm pinhole effects. The low-density surface film has been modeled as a periodic structure and analyzed with 3D electromagnetic simulation tool. The simulation results has been verified through measured electromagnetic transmission results using free space measurements. From the results, it will be possible to use these results for the analysis and the applicability of low-density surface film copper mesh for aircraft.

• Solar Energy
• /
• v.12 no.3
• /
• pp.28-36
• /
• 1992

The performance of a latent heat storage system using a thermosyphon as the heat transfer device between the heat source and the phase change material was investigated experimentally. In order to increase the effective conductivity of the phase change material, layers of copper wire mesh were immersed in the paraffin wax(Sunoco P-116) in such a way that they also may be considered as fins of the thermosyphon. The important results are as follows : (1) The void space of the wire mesh allowed the convection to occur, thus enhanced the performance of the system : (2) The increase of the number of layer of wire mesh increased the conduction heat transfer. However, it also had adverse effect of subduing convective motion of liquid wax : and (3) Overall heat transfer coefficient and thermosyphon conductance increased with the increase of the number of layer of wire mesh, whereas the heat transfer coefficient between the thermosyphon and the wax decreased.

• Photonics industry news
• /
• s.16
• /
• pp.42-45
• /
• 2003

광통신 기술이 구리선을 내몰고 미국 전역을 지배할 것이라는 한 때의 열광적인 확신도 40Gbs를 표준으로 하는 OC-768의 광섬유 기반망과 같은 전철을 밝고 있다. 다른 말로 하면, 기술은 가지고 있으나, 과연 그 기술을 우리가 정말 원하느냐 하는 것이다. 현대 대부분의 광섬유 기반망은 2.5Gbps의 OC-48방식이나 10Gbps의 OC-192방식으로 운용되고 있다. 통신망의 한쪽 끝단을 광섬유로 채우자는 생각은 이제 완고한 저항에 부딪히고 있다. 몇 가지의 예외를 제외하고는 집으로의 연결은 차지하고, 사무실로 직접 광섬유를 연결하는 것 또한 단순히 기술적으로 가능하다는 것 이상을 요구한다.

• Solar Energy
• /
• v.12 no.3
• /
• pp.37-46
• /
• 1992

An experimental study was carried out to investigate the performance of a latent heat storage system using paraffin wax as the phase change material. A thermosyphon was employed to transfer heat from the hot ethylene glycol flowing across the evaporator section of the thermosyphon into the wax. In order to increase the effective thermal conductivity of wax, layers of copper wire mesh were immersed in the wax. Experiments were run for volume ratios of 2%, 3%, and 4%, varying mass flow rate of ethylene glycol in each case. Some of the important results are as follows : (1) The wire mesh enhanced the conductive hea transfer and thus, helped even out the temperature distribution in the wax : (2) The increase of the number of layers of wire mesh increased the conduction. However, it also resulted in increasing the resistance to the convective motion of liquefied wax : and (3) There is an optimal number of layers of wire mesh, maximizing the performance of the storage system, which occurred at a volume ratio of $3{\sim}4%$ in the present study.

• Korean Journal of Crystallography
• /
• v.18 no.1_2
• /
• pp.16-20
• /
• 2007

Under hydrothermal conditions, a 2-dimensional copper(I) coordination polymer [$Cu_2Cl_2$(4,4'-dipyen)] (1) was prepared from [$Cu(OAc)_2]{\cdot}H_2O$, 4,4'-dipyen, and KCl. In polymer 1, copper atoms are linked by the 4,4'-dipyen ligands approximately along the b-axis and are also linked by the chloro ligands approximately along the a-axis to form a 2-D layer, a network of rectangles.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.214-216
• /
• 2017

컴퓨터 기술이 발전하면서 현대사회에서의 정보의 중요도와 의존도가 나날이 증가하고 있다. 정보가 중요해진 만큼 해킹 기술도 다양하고 예측하기 어렵게 만들어지면서 정보사회가 위협받고 있다. 이와 관련된 기술을 이스라엘의 벤구리온대학 내의 사이버보안 연구센터에서 연구했다. 2014년에 개발한 Airhopper는 디스플레이 어댑터에서 출력 시 나오는 주파수를 이용해 데이터를 변조해서 휴대폰으로 수신 할 수 있도록 정보를 추출하는 공격이고, 2016년에 개발한 USBee는 USB 2.0 커넥터를 이용한 장비를 통해서 USB 데이터 와이어를 조작해 특정 주파수를 만들어 무선망을 구축하고 데이터를 추출해 내는 공격이다. 본 논문에서는 이 Airhopper와 USBee 기술을 이용한 사이버 공격 시나리오를 추출하고 이에 대한 예방 및 대응 방안을 제시한다.

• Journal of Advanced Navigation Technology
• /
• v.12 no.6
• /
• pp.653-658
• /
• 2008

The automotive environment is particularly demanding on connector performance, and is characterized by large temperature changes, high humidity and corrosive atmospheres. Fretting is a contact damage process that occurs between two contact surfaces. Fretting corrosion refers to corrosion damage at the asperities of contact surfaces. This damage is induced under load and in the presence of repeated relative surface motion, as induced for example by vibration. This paper critically reviews the works published previously on fretting corrosion of electrical connectors. Various experimental approaches such as testing machines, material selection, testing environments, acceleration testing techniques and preventing methods are addressed. Future research prospects arc suggested.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.275-280
• /
• 2013

With rapidly growing mobile wireless services, the existing copper-based mobile backhaul technologies suffer from reaching the capacity limits. PON technologies is drawing attention as a key solution to replace the existing mobile backhaul technologies due to not only providing innovative network capacity but also cost-effective maintenance caused by the bandwidth gain from optical fibers. With a PON-based mobile backhaul, broadband wireless multimedia services such as a video conference and IPTV can be seamlessly provided. In this paper, we first introduce overview of the PON-based mobile backhaul technology. For a example of practical integration, three types of EPON-WiMAX integrated architectures are proposed and comparatively analyzed in term of costs and network performance. Then, applicable plan and anticipated effects are presented when applying network coding on the PON-based mobile backhaul to improve the performance of delivering multicast traffic.

• Korean Journal of Ichthyology
• /
• v.29 no.1
• /
• pp.41-51
• /
• 2017

To understand the application in farm for the fish aquaculture, we investigated biological and pathological traits on red sea bream Pagrus major which were reared in each copper-alloy net cage and the synthetic fiber net cage for 9 months. Two groups of cage were made and set in Yokji-eup, Tongyoung, Gyeongsangnam-do in size of 25 m in diameter and 10 m of depth. Survival rate of the red sea bream in the rearing copper-alloy net cage and synthetic fiber cage showed 99.75% and 99.70% respectively, there was no significant difference. Daily weight growth rate in each net was shown to 2.13 g/day and 1.65 g/day. Health analysis by blood composition analysis showed a favorable result in the copper-alloy net cage rather than in the synthetic fiber net. Bioaccumulation of heavy metal such as Cu and Zn especially in gonad was higher than other organ. Bioaccumulation of Cu and Zn in the muscle was lower compared to the permitted standard for food safety. Pathogenic infection test discovered Microcotyle tai for parasite, V. alginolyticus and other five species for bacteria. But there was a little bit difference of bacteria infection in copper-alloy net cage and copper-alloy net cage is expected to be has antibacterial effect. Thus, copper-alloy net cage can be applied to farm considering its system stability, recycling, antibiosis and food safety.

• Corrosion Science and Technology
• /
• v.19 no.4
• /
• pp.211-223
• /
• 2020

The external corrosion of buried piping can be controlled using both coating and cathodic protection. Several factors are involved in the damage and deterioration of the coating on pipes. There are many detection methods for coating defects on pipes and the direct current voltage gradient (DCVG) method is one of the most powerful methods. However, the detection reliability of DCVG can be affected by interferences such as stray current, metal objects connected to rectifiers, and copper grids. Therefore, this study focused on the interference effects of rectifiers and a copper grid on the reliability of coating flaw detection. As the length of the interference pipe connected to the rectifier increased, the reliability decreased. In contrast, as the distance between the pipe and the copper grid increased, the reliability of the coating flaw detection increased. The detection results produced by the DCVG method were discussed using current and potential simulations for a pipe with a rectifier and copper grid interference in the soil.