근적외선 흡수 염료는 전통적으로 정보 기록 및 정보 표시 분야에 사용되었을 뿐만 아니라 최근 광학 필터, 바이오, 에너지 저장 및 변환, 코팅 첨가제 등 다양한 응용 분야에 적용되고 있다. 핸드폰이나 디지털 카메라에 사용되는 이미지 센서는 근적외선 영역에서도 감도를 나타내기 때문에 보다 선명한 이미지를 구현하기 위해 근적외선 광학필터가 필수적이다. 에너지 저장 및 변환이 중요해짐에 따라 투명 태양 전지 분야에서는 근적외선 영역까지 흡수 영역을 확장할 수 있도록 다양한 근적외선 흡수 소재가 개발되고 있으며, 이를 이용해 소자 효율을 향상시키는 연구가 진행되고 있다. 미래 모빌리티 기술로 많은 관심을 받고 있는 자기치유 코팅 시스템에 광-열 효과를 갖는 근적외선 흡수 염료가 도입되어 보다 효율적인 자기치유 성능을 구현하는 연구들도 보고되고 있다. 본 총설에서는 대표적인 근적외선 흡수 염료들의 화학 구조들을 소개하고, 근적외선 흡수 염료들을 기반으로 한 최신 응용 연구 동향에 대해 다뤄보고자 한다.
탄소점은 수 nm 크기의 탄소 기반 나노 입자로서 높은 생체 적합성, 우수한 발광 특성 등의 장점으로 인해 바이오 센서 및 바이오 이미징 등 다양한 분야에 응용되고 있다. 하지만 청색광을 발광하는 대부분의 탄소점은 해당 파장의 빛이 생물학적 조직에 대해서 약한 침투성을 보여주기 때문에 생물 의학 분야에서 응용에 한계가 있다. 이를 극복하기 위해 장파장 영역에서의 형광을 방출하는 탄소점 개발의 필요성이 커지고 있다. 본 연구에서는 p-페닐렌다이아민에 염산을 첨가하여 산화 후 중합시킴으로써 장파장 빛을 발광하는 탄소점을 획득할 수 있었다. 이때 염산의 양에 따라 탄소점의 화학적 구조가 영향을 받음을 적외선 분광과 X-선 광전자 분광 분석을 통해 확인할 수 있었다. 이러한 탄소점의 화학적 구조 변화는 이들의 흡광, 형광, 그리고 형광 수율에 영향을 끼쳤다. 이 연구는 장파장을 가지는 탄소점을 합성함에 있어서 영향을 주는 인자 (산)에 대한 이해를 높일 수 있었으며 이를 기반으로 바이오 센서 등의 다양한 생물의학 분야에 높은 응용 가능성을 가지는 효과적인 탄소점의 설계가 가능할 것으로 보인다.
Numerical analysis was performed using FIMMWAVE to optimize the specifications of Si3N4/SiO2 slot and ridge-slot optical waveguides based on confinement factor and effective mode area. The optimized specifications were confirmed based on sensitivity in terms of the refractive index of the analyte. The specifications of the slot optical waveguide, i.e., the width of the slot and the width and height of the rails, were optimized to 0.2 ㎛, 0.46 ㎛, and 0.5 ㎛ respectively. When the wavelength was 1.55 ㎛ and the refractive index of the slot was 1.3, the confinement factor and effective mode area of 0.2024 and 2.04 ㎛2, respectively, were obtained based on the optimized specifications. The thickness of the ridge and the refractive index of the slot were set to 0.04 ㎛ and 1.1, respectively, to optimize the ridge-slot optical waveguide, and the confinement factor and effective mode area were calculated as 0.1393 and 2.90 ㎛2, respectively. When the confinement coefficient and detection degree of the two structures were compared in the range of 1 to 1.3 of the analyte index, it was observed that the confinement coefficient and sensitivity were higher in the ridge-slot optical waveguide in the region with a refractive index less than 1.133, but the reverse situation occurred in the other region. Therefore, in the implementation of the integrated optical biochemical sensor, it is possible to propose a selection criterion for the two parameters depending on the value of the refractive index of the analyte.
An integrated-optical biochemical sensor structure that can perform homogeneous and surface sensing using a 2×2 balanced-bridge Mach-Zehnder interference structure based on the optimized SOI slot optical waveguide was described, and its performance and characteristics were evaluated. Equations for the two output optical powers were derived and examined using the transfer matrices of a 3-dB coupler and phase shifter (channel waveguide). The length of the 3-dB coupler was determined such that the two output optical powers were same using these formulas. In homogeneous sensing, the effect of the refractive index of an analyte in the range of 1.33-1.36 on the two output optical power distributions was numerically derived, and the sensitivity was calculated based on each output and the difference between the two outputs, the former and the latter being 7.5796-19.0305 [au/RIU] and 15.2601-38.1351 [au/RIU], respectively. In the case of surface sensing, the sensitivity range of the refractive index of 1.337 based on each of the two outputs was calculated as -2.2490--3.5854 [au/RIU] and 1.2194-3.8012 [au/RIU], and the sensitivity range of 4.8048-7.0694 [au/RIU] was confirmed based on the difference between the two outputs.
In this work, the finite element method was used to investigate the shifts of resonance frequencies and quality factor of whispering-gallery-mode (WGM) for an opto-fluidic ring resonator (OFRR) biosensor. To describe the near-field radiation transfer, the time-domain Maxwell's equations were employed and solved by using the in-plane TE wave application mode of the COMSOL Multiphysics with RF module. The OFRR biosensor model under current study includes a glass capillary with a diameter of 100 mm and wall thickness of 3.0 mm. The resonance energy spectrum curves in the wavelength range from 1545 nm to 1560 nm were examined under different biosensing conditions. We mainly studied the sensitivity of resonance shifts affected by changes in the effective thickness of the sensor resonator ring with a 3.0 mm thick wall, as well as changes in the refractive index (RI) of the medium inside ring resonators with both 2.5 mm and 3.0 mm thick walls. In the bulk RI detection, a sensitivity of 23.1 nm/refractive index units (RIU) is achieved for a 2.5 mm thick ring. In small molecule detection, a sensitivity of 26.4 pm/nm is achieved with a maximum Q-factor of $6.3{\times}10^3$. These results compare favorably with those obtained by other researchers.
Milk and dairy products are not only excellent foods for humans, providing plentiful varied nutrients, but are also a good medium for detrimental food-borne pathogens. Although the food safety field has stabilized due to standardization of food processing, such as the hazard analysis critical control point (HACCP), outbreaks and cases caused by food-borne pathogens still occur at high rates. In approximately 30% of cases, the disease-causing pathogenic organism is undetermined. Recently, a biosensor was developed that has a simple and fast response and overcomes the problems of conventional methods such as cultivation, immuno-assay, polymerase chain reaction, and microarray. Due to the high selectivity and sensitivity of optical biosensors, it is a suitable method for the immediate detection of food-borne pathogens in milk and dairy products.
Optical waveguide based on symmetric and asymmetric Mach-Zehnder interferometer(MZI) type was designed, fabricated and measured the optical characteristics for the application of biosensor. The wavelength of the input optical signal for the device was 1550 nm. And the difference of refractive index was $0.45\;{\Delta}\%$ between core and cladding of the device. The TM(Transverse Magnetic) mode optical properties of the biosensor were analyzed with the refractive index variation of gold thin film deposited for overclad. Nowadays, nano-photonic crystal structures have been paied much attention for its high optical sensitivity. There is a technique to realize the structure, which is called Dip-Pen Nanolithography(DPN) process. The process requires a nano-scale process patterning resolution and high reliability. In this paper, two dimensional nano-photonic crystal array on the surface was proposed for improving the sensitivity of optical biosensor. And the Dip-Pen Nanolithogrphy process was investigated to realize it.
반도체 소자, 바이오 센서, 태양전지 등에서 집적도 및 소자 성능 향상을 위해서 최근 실리콘 소재를 위주로 한 수직 정렬형 와이어 어레이와 같은 3차원 구조의 소재에 대한 연구가 많이 진행되고 있다. 깊은 반응성 이온 식각법(DRIE: Deep Reactive Ion Etching)과 같은 건식 식각법으로 종횡비가 높은 실리콘 와이어 어레이를 제작할 수 있지만 시간과 공정비용이 많이 소요된다는 단점이 있고 양산성이 없다. 이를 극복하기 위해서 VLS (Vapor-Liquid-Solid)방법이 연구되고 있지만 촉매로 사용되는 금속의 오염으로 인한 소자 성능의 저하를 피할 수가 없다. 본 연구진에서 연구하는 있는 전기화학적 식각법을 사용하면 이러한 문제를 극복하고 매우 정렬이 잘 된 실리콘 와이어 어레이를 제작할 수 있으며 최적 조건을 정립하면 균일하고 재현성 있는 다양한 종횡비의 기판 수직형 실리콘 와이어 어레이를 제작할 수 있다. 또한, 귀금속 촉매 식각법은 금속 촉매를 사용하여 식각을 하지만 VLS 방법과 달리 Top-down 방법을 사용하기 때문에 최종 공정에서 용액에 담구어 귀금속을 식각하여 제거 하면 귀금속 촉매가 실리콘을 오염시키는 일은 배제할 수 있다. 귀금속 촉매 식각법의 경우 사용되는 촉매의 다양화, 포토리소그래피 방법, 그리고 식각 용액의 조성 변화에 따라 다양한 형상의 와이어 어레이를 제작할 수 있으며 이에 대한 결과를 소개하고자 한다. 3차원 실리콘 와이어 어레이를 사용하여 동심원형 p-n접합 와이어 어레이를 제작하면 소수캐리어의 확산거리가 짧아도 짧은 동심원 방향으로 캐리어를 포집할 수 있고 태양광의 입사는 와이어 어레이의 수직 방향이므로 태양광의 흡수도 효율적으로 할 수 있기 때문에 실리콘의 효율 향상을 달성할 수 있다. 이에 대한 본 연구진의 연구결과 및 최근 연구 동향을 발표하고자 한다.
나노 소재 전극은 바이오/화학 분야에서 분석 성능을 향상시키기 위한 핵심 요인으로 활용되고 있다. 금속 나노 소재를 제작하는 방법으로는 크게 용액 공정과 전기증착 공정이 있다. 용액 공정에서 capping agent를 사용하면 금속 원자의 결합 방향을 통제할 수 있어 특이적 구조의 나노 입자를 얻을 수 있고, 전기증착 공정을 이용하면 전극 표면과 금속 원자 사이의 직접적인 결합이 일어나서 높은 결합력을 기대할 수 있다. 이 공정들은 각각의 장점을 가지고 있으나, 문제점 또한 있어 이를 해결하기 위해 많은 연구가 진행되고 있다. 이 논문에서는 전극용 금속 나노 소재를 제작하는 두 기법의 융합, 그로부터 확보한 나노 구조 전극 및 그것의 전기화학적 특성을 살펴보고, 그러한 나노 구조 전극의 센서로서의 활용 가능성에 대해 이야기하고자 한다.
본 논문에서는 레이저 유도에 의한 그래핀 합성 기술 및 이를 이용한 전기/전자 소자 제조 기술과 다양한 소자 제조 기술을 검토하였다. 최근까지 개발되고 있는 3차원 그래핀 구조 활용으로 설계된 마이크로/나노 패턴화는 효율적인 제조공정으로 인하여 많은 각광을 받고 있으며, 차세대 기판 소재로의 응용까지 다양하게 개발되고 있다. 산업에서 요구하는 실제적인 적용 연구의 예들은, 레이저의 파장대역 선택, 출력 조정 및 광 간섭 기술 응용 등의 점진적인 해결방안 논의를 통해 큰 발전 가능성을 보여주고 있다. 기존의 그래핀의 전기/전자 소자 장치로의 응용 확장성은 이미 검증된 바 있으며, 새로운 합성 방식 및 기판 적용 기술은 마이크로 패키징 기술과의 통합 운용으로, 바이오센서, 슈퍼커패시터, 다공성 전기화학 센서 등 응용분야가 매우 다양하다. 본 논문에서 소개하는 레이저 기반 그래핀 가공 기술은 가까운 미래에 휴대형 소형 전자기기 및 전자 소자에 쉽게 적용 가능하리라 사료된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.