• Journal of radiological science and technology
• /
• v.28 no.1
• /
• pp.13-17
• /
• 2005

In domestic nondestructive testing(NDT) field, there have recently been radiation exposure accidents due to a disregard for confirmation of the position of radioisotope during the test. In order to prevent these kinds of accidents, a scintillating film has been developed. The scintillating film that can convert gamma-ray to visible light has a function of the position detection of radioisotope in a opaque guide tube of an NDT apparatus. The aim of this study is to enhance the visibility performance of the scintillating film and find out the best configuration of the scintillating film. In order to find appropriate materials for the scintillating film, various inorganic scintillating materials were evaluated in this work. An absolute luminance of the scintillating films was measured by luminance meter for evaluation of visibility performance. Ir-192 gamma projector was used for NDT apparatus. The experiment shows that the scintillating film with reflective layer was the more effective performance for visibility. The higher mixing ratio of scintillating material to binding material, the higher luminance was measured. $Gd_2O_2S(Tb)$ inorganic powder as the scintillating materials had the best performance for visibility of the scintillating film. The developed scintillating film helps to ensure safer environment to the operators.

• Korean Chemical Engineering Research
• /
• v.55 no.5
• /
• pp.646-651
• /
• 2017

Size and shape of carbon nanotube (CNT) agglomerates in the dilute phase of a bubbling fluidized bed ($0.15m\;i.d{\times}2.6m\;high$) have been determined by the laser sheet technique. Axial solid holdup distribution of the CNT particles showed S curve with dense phase and dilute phase in bubbling fluidization regime. Heywood diameter and Feret diameter of the CNT agglomerates in the dilute phase of bubbling fluidized bed increased with increasing gas velocity. The CNT particle number in the agglomerates increased with increasing of gas velocity. Aspect ratio increased and circularity, roundness and solidity decreased with increasing of gas velocity. A possible mechanism of agglomerates formation was proposed based on the obtained information.

• Analytical Science and Technology
• /
• v.12 no.5
• /
• pp.355-359
• /
• 1999

Trace cadmium was determined in urine by flame and nameless AAS. Inflame method, cadmium was extracted into MIBK from Cd-DDTC complex. In flameless method, samples were pretreated with 1%, Triton X-100. 1% $HNO_3$ and matrix modifier $Pd(NO_3)_2$. Analysis of cadmium was, performed at $450-750^{\circ}C$ ashing temperature by use of pyrocoated tubes. Results of analysis, flameless method superior in sample treatment and reproducibility to flame method and highest absorbance was obtained at $550^{\circ}C$ ashing temperature. 100 mg/L $Pd(NO_3)_2$ concentration. Proposed method were applied to the determination of cadmium in standard urine Lononorm-Metalle 3.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.2
• /
• pp.10-18
• /
• 2008

This paper presents the design and imelementation of an electronic ballast with a passive PFC structure from which acoustic resonance of the metal halide lamp was removed by introducing the frequency modulation(FM) method. The proposed ballast consists of an EMI filter, passive PFC circuit full-bridge inverter, LC resonance type igniter and a circuit for removing acoustic resonance. The FM method solved two problems associated with single frequency driving: variation of the acoustic resonance range according to lamp aging and the acoustic resonance range discrepancy caused by different materials sealed inside the arc tube and their pressures for arc tubes of identical sizes from different manufacturers. Performance of the prototype developed for this study of the electronic ballast for 1[kW] metal halide lamp was verified by evaluating its optical conversion efficiency, input PF, input current THD and power conversion efficiency.

• Korean Journal of Crystallography
• /
• v.15 no.1
• /
• pp.18-23
• /
• 2004

In order to find the optical properties of CdSe thin film and CdSe nanostructure, the following experiments were performed: the CdSe wurtzite nanostructure was made by using 99.99% CdSe (Aldrich) powder with the $SiO_x$ substrates and the $AlO_x$ membranes in $7{\times}10^{-6}$ torr vacuum. (The average vacuum coating speed being 1 ${\AA}$/sec). The calculations obtained were about 200 nm diameter of nanotubes on the $AlO_x$ membranes and a crystallite size of about 2 nm on the $SiO_x$ substrates. These results were verified through the Scanning Electron Microscopy (SEM) analysis, thin film X-ray diffraction analysis and emission spectroscopy.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.1038-1042
• /
• 2003

LED(Light Emitting Diodes)를 이용한 LCD 백라이트는 현재까지 모바일용의 $2{\sim}3$ 인치정도의 소형모델에서 상용화되고있다. 현재 동종분야에서 $5{\sim}7$ 인치 이상의 중대형에서는 아직 검토나 개발단계인 것으로 파악되고 있다. LED의 특징인 장수명, 고색순도, Robustness 등의 장점에도 불구하고 광효율이나 경제적측면에서 아직 형광램프 Type 에 비해 개선점이 남아있는 것도 개발지연 이유중의 하나다. 최근에 일부 광원업체에서 소비전력 5W로 높은 출광효율을 갖는 고휘도를 가진 LED가 개발되고있다. 고색재현성을 요구하는 TV등의 민수용 디스플레이시장이 커지는 현 추세에 한 방법으로 3색의 고휘도 LED광원을 사용한 백 라이트를 개발했다. R(Red), G(Green), B(Blue)의 3색 점광원 다수를 이중도광판 구조의 장변에 일정 간격으로 배열하여 최종 출사면에서 백색이 되도록 소정의 구성비로 설계하였다. 점광원간의 간격으로 인해 발생되는 혼색도를 보완하기위해 광원과 출사면까지의 광경로를 점광원이 아닌 튜브형의 형광광원 사용시보다 일정량 길게 설계해야 되는데, 이것으로 인해 출광효율이 형광램프구조에 비해 떨어지는 결과로 나타났다. 본 연구에서는 17인치 모니터구조의 백라이트에서 색재현성 105%와 소비전력 67W에서 표면휘도 $2000cd/m^2$ 정도를 달성하였다.

• Journal of the Korean Ceramic Society
• /
• v.45 no.6
• /
• pp.331-335
• /
• 2008

The purpose of this study is to characterize the photo-catalytic efficiency of $TiO_2$ nanotube with respect to the distribution of anatase phase which can be changed by the annealing temperature of $TiO_2$ nanotube. $TiO_2$ nanotube was fabricated by the anodization method in the 0.5 wt% HF electrolyte. And then the $TiO_2$ nanotube was annealed at temperatures ranging from $380^{\circ}C$ to $780^{\circ}C$ in dry oxygen ambient for 2 h. For the photo-catalytic water-splitting tests, the photocurrent density was measured as a function of applied potential with a potentiostat using a Ag/AgCl reference, Pt counter electrode, and 1 M KOH electrolyte under illumination of UV by a Xe arc lamp of 1 KW. According to the UV photo-catalytic water-splitting tests, the nanotube annealed at $560^{\circ}C$ was found to show the highest photocurrent density.

• 한국태양에너지학회:학술대회논문집
• /
• 2011.04a
• /
• pp.121-126
• /
• 2011

The heat from PV modules should be removed for better electrical performance, and can be converted into useful thermal energy. A photovoltaic-thermal(PVT) module is a combination of PV module with a solar thermal collector which forms one device that converts solar radiation into electricity and heat simultaneously. In general, there are two different types of PVT module: glazed PVT module and unglazed PVT module. On the other hand, two types of the PVT module can be distinguished according to absorber on PV module rear side: the sheet-and-tube absorber PVT module and the fully wetted absorber PVT module. In this paper, the experimental performance of water type unglazed PVT with fully wetted absorber was analyzed. The electrical and thermal performance of the unglazed PVT were measured in outdoor conditions, and the results were analyzed. The experimental results showed that the thermal efficiency of the PVT module was 42% average, and its electrical efficiencies were 15.2% and 14.2% average, respectively, for the mean fluid temperature of $10-20^{\circ}C$ and $21-30^{\circ}C$. Thermal efficiency depends on solar radiation, mean fluid temperature and ambient temperature. The PVT module temperature is related to the cooling effect of the PV module by the fluid of the absorber. The results proved that the electrical efficiency was higher when the mean fluid temperature was lower.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.4
• /
• pp.333-339
• /
• 2011

In this work, electrochemical characteristics and optical transmittance of carbon nanotubes (CNTs) counter electrodes which had different amount of CNTs in CNTs slurries were analyzed. Two-step heat treatment processes were applied to achieve well-fabricated CNTs electrode. Three sets of CNTs electrodes and dye-sensitized solar cells (DSSCs) with CNTs counter electrodes were prepared. As the amount of CNTs increased, sheet resistance of CNTs electrode decreased. CNTs electrode with low sheet resistance had low electrochemical impedance and fast redox reaction. On the other hand, in case of CNTs counter electrode with low density of CNTs, performance of the dye-sensitized solar cell was improved due to its high optical transmittance. We found that the transmittance of CNTs counter electrode influence the performance of dye-sensitized solar cells.

• Elastomers and Composites
• /
• v.45 no.1
• /
• pp.25-31
• /
• 2010

We used activated carbon (AC), activated carbon fiber (ACF) and multi-walled carbon nanotube (MWCNT) as carbon sources and titanium n-butoxide as titanium source to prepare carbon-$TiO_2$ composites. For characterization their properties, scanning electron microscopy (SEM), transmission electron microscopy (TEM), BET surface area, X-ray diffraction (XRD) and energy dispersive X-ray analysis (EDX) were used. And the photoactivity of the carbon-$TiO_2$ composites, under UV irradiation, was tested using the fixed concentration of methylene blue (MB, $C_{16}H_{18}N_3S{\cdot}Cl{\cdot}3H_2O$) in aqueous solution. After UV irradiation for a certain time, the concentration of MB solution was determined by UV-vis absorption spectroscopy.