• Journal of Sensor Science and Technology
• /
• v.31 no.1
• /
• pp.24-30
• /
• 2022

Distributed fiber-optic acoustic·vibration sensing technology is becoming increasingly popular in many industrial and academic areas such as in securing large edifices, exploring underground seismic activity, monitoring oil well/reservoir, etc. Long-range perimeter intrusion detection exemplifies an application that not only detects intrusion, but also pinpoints where it happens and recognizes kinds of threats made along the perimeter where a single fiber cable was installed. In this study, we developed a distributed fiber-optic sensing device that measures a distributed acoustic·vibration signature (pattern) for intrusion detection. In addition, we demontrate the proposed deep learning algorithm and how it classifies various intrusion events. We evaluated the sensing device and deep learning algorithm in a practical testbed setup. The evaluation results confirm that the developed system is a promising intrusion detection system for long-distance and seamless recognition requirements.

• Journal of Advanced Navigation Technology
• /
• v.18 no.2
• /
• pp.158-164
• /
• 2014

For transmitting the ultra-high speed optical signals with better performance, the techniques to suppress or mitigate the signal distortion due to group velocity dispersion and optical Kerr effects are required. Dispersion management (DM), optical phase conjugation, and the combination of these two are promising techniques to compensate for the signal distortion. However, the fixed length of single mode fiber (SMF) and the fixed residual dispersion per span (RDPS) usually used in these optical links restricts flexible link configuration. The goal of this paper is to investigate the possibility of the flexible configurations of the ultra-high and long-haul optical transmission systems by using the artificial and the random distribution of SMF length and RDPS of each fiber spans consisted of the optical link. It is confirmed that the proposed link configurations should be one of the methods suitable for implementing the flexible optical transmission systems, however which depend on other link parameters, such as the averaged RDPS, and the launch power.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.2
• /
• pp.275-280
• /
• 2013

With rapidly growing mobile wireless services, the existing copper-based mobile backhaul technologies suffer from reaching the capacity limits. PON technologies is drawing attention as a key solution to replace the existing mobile backhaul technologies due to not only providing innovative network capacity but also cost-effective maintenance caused by the bandwidth gain from optical fibers. With a PON-based mobile backhaul, broadband wireless multimedia services such as a video conference and IPTV can be seamlessly provided. In this paper, we first introduce overview of the PON-based mobile backhaul technology. For a example of practical integration, three types of EPON-WiMAX integrated architectures are proposed and comparatively analyzed in term of costs and network performance. Then, applicable plan and anticipated effects are presented when applying network coding on the PON-based mobile backhaul to improve the performance of delivering multicast traffic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6B
• /
• pp.331-337
• /
• 2005

The optical Internet is considered as a feasible solution for transporting huge amount of traffic volume in the future Internet. Among optical switching technology for the optical Internet, OBS becomes one of the most promoting solution. Recently, a lebeled OBS(LOBS) architecture is considered for an efficient control on OBS network. Given that a data burst may contain few thousands of IP packets, a single loss of data burst results in a serious throughput degradation in LOBS network. In this paper, we improve the performance of LOBS network by introducing the burst congestion control mechanism. More specifically, the OBS router at the network core detects the network congestion by measuring the loss probability of burst control packet. The OBS router at the network edge reduces the burst generation according to the network condition repored by the OBS router at the network core. Through the simulations, it is shown that the proposed congestion control mechanism can reduce the burst loss probability and improve the LOBS network throughput.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.3
• /
• pp.208-216
• /
• 2017

This paper presents the design method of an FMCW(frequency-modulated continuous-wave) altitude simulator which generates propagation delay signals according to target distances to test the radar altimeter. To improve the conventional RF method for creating delay signals, the simulator is designed by the RF-optics-RF method using optical delay lines. In addition, it is designed to simulate the Doppler shift and jamming that may occur in actual flight environment. In order to evaluate the performance of the developed simulator, the integration tests have been conducted with the radar altimeter. Through the test, we successfully verified the performance of the simulator.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.395-399
• /
• 2007

Renewable energy sources such as wind energy is copiously available without any limitation. Wind turbines are used to tap the potential of wind energy which is available in millions of megawatt. Reliability of wind turbine is critical to extract this maximum amount of energy from the wind. We reviewed different techniques, methodologies, and algorithms developed to monitor the performance of wind turbine as well as for an early fault detection to keep away the wind turbines from catastrophic conditions due to sudden breakdowns. To keep the wind turbine in operation, implementation of Condition Monitoring System (CMS) is paramount, and for this purpose ample knowledge of these types of system is mandatory. So, an attempt has been made in this direction to review maximum approaches related to CMS in this piece of writing.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.08a
• /
• pp.135-136
• /
• 2002

테라비트급 WDM 광전송시스템은 채널당 10Gb/s의 전송속도를 갖는 채널을 파장분할다중하여 하나의 광섬유로 전송하는 시스템이다. 시스템의 주요 영역으로는 광을 송수신하는 광트랜스폰더, 다채널의 광신호를 다중/역다중 하는 광 다중화기/역다중화기, 광신호를 증폭하기 위한 광증폭기, 그리고 광분기 삽입기 등으로. 구성된다. 우리가 구성하는 테라비트급 WDM 광전송시스템은 구조 변경없이 TM 및 ADM 방식을 수용한다. 시스템의 신뢰성을 위해 종속망 절체 및 광학적 계층에서의 보호절체 방식으로 1+1 OCh 및 1+1 OMS 절체 기능을 선택적으로 수용할 수 있어 시스템 운영에 따라 효율적이고 경제적인 망 운영을 할 수 있다. 감시채널은 시스템 유지보수에 필요한 신호(PMI, FDI, BDI 등) 및 시스템 DCC용으로 되어 있으며, WDM 망에 적합한 감시 체계를 설계하였다.

• Annual Conference of KIPS
• /
• 2003.05b
• /
• pp.1117-1120
• /
• 2003

DWDM(DensedWavelengthDivisionMultiplexing)은 광 파이버를 이용하여 기존의 통신보다 높은 대역폭(B/W)을 얻기 위한 기술로 여러 신호를 각각 다른 파장으로 변조해 하나의 Fiber 를 통해 전송하는 방식이며, 기본적으로 EDFA(Erbium Doped Fiber Amplifier), AWG(Arrayed Wave guide Grating), OADM(Optical Add/Drop Multiplexer) 등의 주요 부품과 여러 광 관련 부품들로 구성돼 있으며, 다수의 파장을 MUX(AWG)에서 다중화하고, 장거리 전송을 위해 OA(EDFA)에서 광신호를 증폭하게 된다 그리고 일부 특정 파장만 Add/Drop하기 위해 OADM이 놓이게 되며, 또한 선로(광섬유)의 손실을 보상하기 위해 필요한 구간에 리피터(EDFA)를 두어 광신호를 증폭 송신하며 수신단에서는 들어오는 여러 파장을 OA(EDFA)를 통해 증폭한 후 DEMUX(AWG)에서 역 다중화해 수신하게 된다. 이와 같은 DWDM방식을 이용한 Network는 Star, Mesh, Ring 등의 다양한 형태로 구성될 수 있으며, 초기에는 Point-to-Point 방식의 장거리 전송에 주로 사용돼 왔으나 Metro 구간의 Traffic 이 급격히 증가하면서 Metro- DWDM Network 이 부각되고 있어 본 논문에서는 현재 SK Telecom에서 상용화되고 있는 1,600G DWDM과 Metro-DWDM간의 망 구축의 최적화 방안을 연구해 본다.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.10
• /
• pp.156-164
• /
• 1998

Electronic Speckle Pattern Interferometry(ESPI) has been used to measure surface deformations of engineering components and materials in industrial areas. ESPI, a non-contact and non-destructive technique, is capable of providing full-field results with high spatial resolution and high speed. One of the important application using electronic speckle pattern interferometry is electronic speckle contouring of a diffused object for 3-D shape analysis and topography measurement. Generally the electronic speckle contouring is suitable for providing measurement range from millimeters to several centimeters. In this study, we introduce the contouring method by modified dual-beam speckle pattern interferometer and the shift of the two illumination beams through optical fiber in order to obtain the contour fringe patterns. We also describe formation process of depth contour fringes and grid contour fringes by shifting direction of the two illumination beams. Before the experiments, we performed the geometric analysis for dual-beam-shifted ESPI contouring, and then, the electronic speckle contouring experiment with various specimens. For quantitative analysis of the contour fringes, we used 4-frame phase shifting method with PZT Finally, good agreement between the geometric analysis and experimetal results is obtained.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.224-231
• /
• 2008

A subway or an underground railway is one of the representative public transportations which lots of people take everyday. Then, subway station, which is also one of the very important public civil infrastructures, generally services for a long period of time. During the service time of stations, they are easily damaged from environmental corrosion, material aging, fatigue, and the coupling effects with long-term loads and extreme loads. Recently, civil construction work on the places near station often creates lots of damages to the station. As these damages accumulate, the performance of station degenerates due to the above factors. They would inevitably reduce the resisting capacity of station against the disaster; even they bring into the collapse of stations with the structural failure under long-term loads and extreme loads. And, if disaster such as earthquake, fire, etc. happens, it causes huge property damage and threatens the human lives. Because of these above reasons, the structural health monitoring system need to be developed for ensuring the safety of station. In this paper, the development directions of the structural health monitoring system with fiber optic sensor and USN for subway station are briefly described.