• Proceedings of the Korean Society of Computer Information Conference
• /
• 2010.07a
• /
• pp.63-66
• /
• 2010

기존의 입자계수기(Particle Counter)는 0.3um의 최소 인식 크기와 샘플링 유량이 2.83 lpm을 갖는다. 본 논문에서는 0.1um의 최소 인식 크기와 샘플링 유량이 28.3lpm과 50lpm을 갖는 입자 계수기를 개발하였다. 이와 함께 온도, 습도, 정전기를 실시간으로 측정하여, 이를 무선 인터페이스를 통해서 모니터링 프로그램과 연동, DB화하여 크린룸 현장의 환경을 실시간으로 유지 관리하도록 하였다.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.73-82
• /
• 2017

This study is focused on concepts and types of drilling investigating the scope of activity and problems the application of marine environment and safety acts related to deep-sea drilling for the development of the continental shelf in Korea. For the systemic development of subsea mineral resources, this study suggest a legislative proposal for the establishment of a separate law based on the UK Offshore Installation (Safety Case) regulation and improvement of the marine environment management act, maritime safety act and oil & mining safety regulation. Specially, this study emphasized on the necessity of establishing education, training and evaluation system according to the international certification training for the domestic work force based on accident cases related to overseas offshore plants.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.6
• /
• pp.119-128
• /
• 2020

An ultrasonic multiple scattering simulation using cross-section of fine dust particles were proposed. These days, along with awareness of air pollution, social interest in fine dust is increasing. In the construction field, awareness of fine dust is increasing, and research on preparing various countermeasures is underway. The light scattering method fine dust meter currently in use is affected by environmental factors such as relative humidity, and reliability problems in terms of accuracy are continuously reported. However, the transmission of ultrasonic waves can directly reflect the physical change of the medium based on the mechanical wave. Using these advantages of ultrasonic waves, fine dust measurement simulation was performed using the scattering cross section and ultrasonic multiple scattering theory. The shape data of the fine dust particles were collected using a SEM (Scanning Electron Microscope), and a cross-section according to the fine dust particles was derived through numerical analysis. As a result of signal processing, the error for the number density corresponding to each cross-section is minimum 19, maximum 3455.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.971-974
• /
• 2005

Science and technology-related societies in the interior of a country sum up to approximately 660, and are increasing yearly, due to the development of new research fields and segmentation of past studies. Such societies are contributed with latest academic research information, and the submitted studies go through an review process before publication. A majority of the societies employ the traditional off-line review method; various problems and issues occur in delay of submission, review, revision, and management of the numerous paper submitted and published. Therefore, this study suggests the design of, and implemented an on-line paper review system which processes on-line submission and review of paper, facilitates swift and review progress, and enables efficient control and management on general tasks and academic information through integrated administration of members and published works.

• Resources Recycling
• /
• v.27 no.6
• /
• pp.11-22
• /
• 2018

Magnetic separators has been used in the mining and the recycling fields in general, and is still applied in wide variety of fields. It is classified into the equipments for separating coarse ferrous scrap from non-ferrous materials and the equipments for concentrating fine ferromagnetic particles below 3mm. Magnetic separation equipments for concentrating fine materials also falls into two categories of low intensity and high intensity magnetic separators. The former is used for ferromagnetic materials but also paramagnetic materials of high magnetic susceptibility, and the latter for paramagnetic materials of lower magnetic susceptibility. Both low and high intensity magnetic separators could be utilized either dry and wet. Recently, the High gradient magnetic separators(HGMS) used in the range of less than 0.7 tesla has been gradually replaced by the magnetic separator made of rare earth permanent magnets commercialized in the 1980s. In addition, the expansion of nanotechnology in terms of synthetic magnetic materials in the environmental and biological fields is expected to contribute positively to the development of magnetic separation technology.

• Journal of Korean Society of Forest Science
• /
• v.109 no.4
• /
• pp.382-389
• /
• 2020

Soil properties in opencast mines are a key factor in reclamation (revegetation) of mining areas. In this study we determined the soil physical and chemical properties of kaolinite tailings, reclaimed areas, and adjacent natural red pine (Pinus densiflora S. et Z.) forests in kaolinite opencast mines in Sancheong-gun, Gyeongsangnam-do. Six sites were chosen for collection of soil samples to determine soil physical and chemical properties at a soil depth of 10 cm. Soil bulk density was significantly higher (P < 0.05) in the kaolinite tailings (1.51 g·cm-3) than in the reclaimed areas (1.19 g·cm-3) and red pine forests (0.93 g·cm-3), whereas air phase in the kaolinite tailings (14.2%) was significantly lower than in the red pine forests (32.6%). Clay content in the red pine forests was significantly higher than in the reclaimed areas (18.7%) or kaolinite tailings (14.8%), whereas soil structural stability index was significantly lower in the reclaimed areas (1.61%) and kaolinite tailings (0.87%) than in the red pine forests (7.75%). Soil pH was significantly higher in the kaolinite tailings (pH 6.68) and reclaimed areas (pH 6.27) than in the red pine forests (pH 5.31). Soil organic carbon and total nitrogen were significantly higher in the red pine forests (C: 36.03 mg·g-1; N: 2.08 mg·g-1) than in the reclaimed areas (C: 5.00 mg·g-1; N: 0.31 mg·g-1) than in the kaolinite tailings (C: 2.12 mg·g-1; N: 0.07 mg g-1). The amount of available phosphorus was not significantly different among the three treatments. The concentration of exchangeable potassium was significantly lower in the kaolinite tailings (0.08 cmolc·kg-1) than in the reclaimed areas (0.21 cmolc·kg-1) and red pine forests (0.30 cmolc·kg-1). These results indicate that, because of high soil bulk density and low soil organic carbon, total nitrogen, available phosphorus, and exchangeable potassium in kaolinite tailings and reclaimed mining areas, soil nutrient management is needed in order to reclaim the vegetation in these type of areas.

• Journal of the Korean earth science society
• /
• v.28 no.2
• /
• pp.240-247
• /
• 2007

Geological information can be used for various purposes, such as the mine development, landuse, environmental protection, construction industry, and the development of water resource. Although geological information is highly useful for developing industrial raw materials, national land management and people's welfare, there is no unified public institution in charge of collecting and managing geological information at the national level. Thus, the government is to collect geological information, to construct database and to utilize and to distribute the information in a long-term and systematic way, the purpose of this study is to propose strategies for establishing an integrated geological information management system. In this study, we A) analyzed the current state and management of geological information in Korea and other countries; B) surveyed demand for geological information and analyzed correlations; C) drew up a conceptual diagram of the national integrated geological information management system; and D) developed strategies for establishing the national integrated geological information management system.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.6
• /
• pp.294-301
• /
• 2013

The particle matter concentrations in the subway stations should be monitored and controlled for the health of commuters on the subway system. Seoul Metro and Seoul Metropolitan Rapid Transit Corporation are measuring several air pollutants regularly. In this paper, the reliability of the cheap instruments using light scattering method is improved with the help of a linear regression analysis technique to measure the $PM_{10}$ concentrations continuously in the subway stations. In addition, a monitoring system is implemented to display and record the data of $PM_{10}$, $CO_2$, humidity, and temperature. To transmit and receive these measured sensor data, CDMA M2M wireless communication method is applied.

• Journal of Radiation Protection and Research
• /
• v.19 no.2
• /
• pp.99-107
• /
• 1994

This study aims to introduce a prescriptive methodology to comprehensively support the analysis of decision process by the use of Saaty's Analytical Hierarchy Process for the optimization of radiation protection. The analytical Hierarchy Process for the optimization of radiation protection. The analytical process for the problem of selecting options among given protection alternatives is illustrated with the data of the uranium mine example in ICRP Publ. 55. This technique, unlike other conventional selection method, is considered to provide a useful tool for the protection manager with respect to its ease of use and simplification in the choice of optimal alternative associated with radiological protection.

• Tunnel and Underground Space
• /
• v.30 no.1
• /
• pp.1-14
• /
• 2020

Microseismic monitoring is utilized for the performance verification and safety management of the structure by detecting fine levels of damage. In order to construct a highly reliable microseismic monitoring system, the role of signal conditioner is critical. The signal conditioner helps with accurate data collection and precision control of the device, and performs additional functions such as signal conversion, linearization, and amplification. In this technical report, noise reduction signal conditioner suitable for mining sites was developed and reviewed for the purpose of implementing more precise monitoring by supplementing the previously developed microseismic monitoring system.