• Economic and Environmental Geology
• /
• v.3 no.2
• /
• pp.123-133
• /
• 1970

위에서 상논(詳論)한것을 요약(要約)하면, 1) 본(本) 지성(地城)을 구성(構成)하는 지질(地質)은 신나통(新羅統)의 퇴적암류(堆積岩類), 이를 관입(貫入)하는 불국사순(佛國寺純)의 화강록암(花崗綠岩) 및 암맥(岩脈)으로 되어 있다. 2) 광구일대(鑛區一帶)의 퇴적암류(堆積岩類)는 원내(原來)의 퇴적상(堆積相)과 화강섬록암(花崗閃綠岩)의 관입등(貫入等)으로 규화(珪化)되 어 규암(珪岩) 또는 규화(珪化)된 혼펠스로 변(變)하여 있다. 3) 지질구조(地質構造)는 단순(單純)한 배사(背斜)를 나타내 며 퇴적암(堆積岩) 및 화강섬록암중(花崗閃綠岩中)에 수(數) sets의 절이(節理)가 발달(發達)하여 이들에 따라 광화작용(鑛化作用)이 이루어졌다. 4) 광상(鑛床)은 퇴적암(堆積岩) 및 화강섬록암중(花崗閃綠岩中)의 열하에 연(沿)하여 배태(胚胎)하며 연(軟)망간광(鑛) 광맥(鑛脈)과 금은광맥(金銀鑛脈)의 2종(種)이 발달(發達)된다. 5) 금은광맥(金銀鑛脈)은 맥폭(脈幅)이 좁고 주향방향(走向方向)의 연장(延長)이 단속(斷續)되 며 분석결과(分析結果) 금(金)은 없고 은(銀)은 23.3g/t 내지(乃至) 913.3g/t 이여서 가행가치(稼行價直)가 없다. 6) 망강광맥(鑛脈)은 수조(數條)있으나 주목(注目)만한 것은 제(第)4갱맥(坑脈)과 제(第)5갱맥(坑脈)으로서, 전자(前者)는 연장(延長) 120m, 평균맥폭(平均脈幅) 0.5m 추정(推定)되며, 평균품위(平均品位)는 Mn 약(約) 17.5%이다. 후자(後者)도 연장(延長) 120m, 평균맥폭(平均脈幅) 0.6m 추정(推定)되며, 평균품위(平均品位)는 15.7%이다. 7) 광맥(鑛脈)은 후화강섬록암시기(後花崗閃綠岩時期)의 열하의 방위(方位)에 지배(支配)받으며, 주향(走向) 및 경사방향(傾斜方向)으로 전변(轉變)한다. 그러나 규암질모암(珪岩質母岩)의 성질(性質)로 보아 광상(鑛床)이 팽대(膨大)하여질 가능성(可能性)은 없다. 8) 망간 및 금은광맥(金銀鑛脈)은 열수광상(熱水鑛床)에 속(屬)한다.

• Nuclear industry
• /
• v.7 no.4 s.50
• /
• pp.98-99
• /
• 1987

• Journal of the Korean Geographical Society
• /
• v.50 no.5
• /
• pp.459-472
• /
• 2015

Weathering hollows which develop on various rocks are the terrain whose lithological characteristics and formation of the bed rock is under active discussion. The shore in Dapyeong-ri, Sacheon-si has alternation of strata of pelite and sandstone, and the weathering hollows develop on the shore platform and the sea cliff where sandstone is exposed. To analyze the development characteristics of weathering hollows by development of joints, interpenetration of veins and physical and chemical features of the stone, the study conducted a topographic investigation, XRD analysis and an observation using a polarizing microscope. As the result of the investigation and analysis, tafoni and gnamma are spread in the same area and new tafoni is being formed as the existing weathering hollows are destroyed by the expansion and growth of the joint. The vein, which was found to be a quartz vein, may accelerate the development of weathering hollows combining with the joint but may also hamper their growth if the veins are penetrating perpendicularly. It is generally known that weathering hollows develop regardless of the type of rocks, however, the analysis on the lithological features show that the development is limited on the fractured and broken rocks.

• Geophysics and Geophysical Exploration
• /
• v.11 no.3
• /
• pp.250-262
• /
• 2008

In order to assess the feasibility of the dipole-dipole electric method to the investigation of metallic ore deposit, both field data simulation and inversion are carried out for several simplified ore deposit models. Our interest is in a vein-type model, because most of the ore deposits (more than 70%) exist in a vein type in Korea. Based on the fact that the width of the vein-type ore deposits ranges from tens of centimeters to 2m, we change the width and the material property of the vein, and we use 40m-electrode spacing for our test. For the vein-type model with too small width, the low resistivity zone is not detected, even though the resistivity of the vein amounts to 1/300 of that of the surrounding rock. Considering a wide electrode interval and cell size used in the inversion, it is natural that the size of the low resistivity zone is overestimated. We also perform field data simulation and inversion for a vein-type model with surrounding hydrothermal alteration zones, which is a typical structure in an epithermal ore deposits. In the model, the material properties are assumed on the basis of resistivity values directly observed in a mine originated from an epithermal ore deposits. From this simulation, we can also note that the high resistivity value of the vein does not affect the results when the width of the vein is narrow. This indicates that our main target should be surrounding hydrothermal alteration zones rather than veins in field survey. From these results, we can summarize that when the vein is placed at the deep part and the difference of resistivity values between the vein and the surrounding rock is not large enough, we cannot detect low resistivity zone and interpret the subsurface structures incorrectly using the electric method performed at the surface. Although this work is a little simple, it can be used as references for field survey design and field data Interpretation. If we perform field data simulation and inversion for a number of models and provide some references, they will be helpful in real field survey and interpretation.

• Economic and Environmental Geology
• /
• v.19 no.spc
• /
• pp.97-102
• /
• 1986

Concepts on mineral association, mineral paragenesis, and mineralization stage relating to macrostructures of vein filling in ore veins are briefly discussed. As an example of plutonic ore vein, macrostructures of vein filling of plutonic tungsten-tin-copper vein at the Ohtani mine, Kyoto Prefecture, Japan, one of representatives of plutonic tungsten-tin vein related genetically to acidic magmatism of late Cretaceous in the Inner zone of Southwest Japan, are examined. Based on macrostructures of vein filling, three major mineralization stages, are distinguished by major tectonic breaks. Sequence of mineralization, characteristic features of each mineralization stage, and variations of filling temperature and salinity ranges of fluid inclusions in minerals from stage I to stage III are summarized.

• Proceedings of the KSEEG Conference
• /
• 2000.04b
• /
• pp.264-265
• /
• 2000

• The Journal of the Petrological Society of Korea
• /
• v.20 no.2
• /
• pp.115-135
• /
• 2011

Fe-Ti ore bodies and mafic granulite occur in the Sancheong anorthosites, south Korea. In order to determine their petrogenetic relationship and to classify the Fe-Ti ore bodies, we have synthetically analyzed characteristics in the field, such as distribution and occurrence, and petrologic features through detailed outcrop sketches. The ore bodies are divided into the regular vein dike- and irregular veinlet swarm types, according to their characteristics of contact with the anorthosites and internal structures. The former shows the tabularly intrusive contact and the pervasively ductile-sheared interior, while the latter, the irregularly tortuous contact and the almost intact interior. Most of the ore bodies are cross-cutting the foliation of the anorthosites and possess abundant anorthositic xenoliths, indicating their intrusion after the formation of foliation in the anorthosites. The mafic granulite, also bearing abundant anorthositic xenoliths, shows interior foliations nearly parallel to intrusion contact, and has abundant ilmenites approximately the same as those of the Fe-Ti ore bodies in chemical composition. And its intrusion into adjacent anorthosites is observed and the intrusion is finally changed into an irregular veinlet swarm type ore body. It is, thus, interpreted that the granulite in the study area was the host material of Fe-Ti ore bodies.

• Journal of the Mineralogical Society of Korea
• /
• v.25 no.4
• /
• pp.305-312
• /
• 2012

• Economic and Environmental Geology
• /
• v.45 no.6
• /
• pp.623-641
• /
• 2012

The Janggun lead-zinc-silver deposit is hydrothermal-metasomatic deposit. We have sampled wallrock, hydrother-maly-altered rock and lead-zinc-silver ore vein to study the element dispersion during wallrock alteration. The hydrothermal alteration that is remarkably recognized at this deposit consists of rhodochrositization and dolomitization. Wallrock is dolomite and limestone that consisit of calcite, dolomite, quartz, phlogopite and biotite. Rhodochrosite zone occurs near lead-zinc-silver ore vein and include mainly rhodochrosite with amounts of calcite, dolomite, kutnahorite, arsenopyrite, pyrite, chalcopyrite, sphalerite, galena and stannite. Dolomite zone occurs far from lead-zinc-silver ore vein and is composed of mainly dolomite and minor calcite, rhodochrosite, pyrite, sphalerite, chalcopyrite, galena and stannite. The correlation coefficients among major, trace and rare earth elements during wallrock alteration show high positive correlations(dolomite and limestone = $Fe_2O_3(T)$/MnO, Ga/MnO and Rb/MnO), high negative correlations(dolomite = MgO/MnO, CaO/MnO, $CO_2$/MnO, Sr/MnO; limestone = CaO/MnO, Sr/MnO). Remarkable gain elements during wallrock alteration are $Fe_2O_3(T)$, MnO, As, Au, Cd, Cu, Ga, Pb, Rb, Sb, Sc, Sn and Zn. Remarkable loss elements are CaO, $CO_2$, MgO and Sr. Therefore, elements(CaO, $CO_2$, $Fe_2O_3(T)$, MgO, MnO, Ga, Pb, Rb, Sb, Sn, Sr and Zn) represent a potential tools for exploration in hydrothermal-metasomatic lead-zinc-silver deposits.

• Review of KIISC
• /
• v.22 no.4
• /
• pp.14-20
• /
• 2012

바이오 인식, 즉 지문, 목소리, 얼굴, 눈동자, 칩, 땀 등 인간이 가진 바이오 인식 정보를 기반으로 한 IT는 많은 응용이 가능하다. IT 전문가들은 모바일을 활용한 바이오 인식 비즈니스야말로 21세기의 새로운 광맥이 된다고 믿고 있다. 바이오 인식 기술은 가트너 그룹 및 미국 MIT 대학의 '21세기 유망 20대 기술' 중 하나로 선정되기도 하였으며 타 IT 산업에 비해 10~20% 이상의 높은 성장률을 보일 것으로 예상하고 있다 본 논문에서는 이와 같은 바이오 인식 기술을 모바일장치에 적용한 최신 사례들을 분석하고 동향을 소개한다.