• Title/Summary/Keyword: 공집합

Search Result 473, Processing Time 0.024 seconds

Way-set Associative Management for Low Power Hybrid L2 Cache Memory (고성능 저전력 하이브리드 L2 캐시 메모리를 위한 연관사상 집합 관리)

  • Jung, Bo-Sung;Lee, Jung-Hoon
    • IEMEK Journal of Embedded Systems and Applications
    • /
    • v.13 no.3
    • /
    • pp.125-131
    • /
    • 2018
  • STT-RAM is attracting as a next generation Non-volatile memory for replacing cache memory with low leakage energy, high integration and memory access performance similar to SRAM. However, there is problem of write operations as the other Non_volatile memory. Hybrid cache memory using SRAM and STT-RAM is attracting attention as a cache memory structure with lowe power consumption. Despite this, reducing the leakage energy consumption by the STT-RAM is still lacking access to the Dynamic energy. In this paper, we proposed as energy management method such as a way-selection approach for hybrid L2 cache fo SRAM and STT-RAM and memory selection method of write/read operation. According to the simulation results, the proposed hybrid cache memory reduced the average energy consumption by 40% on SPEC CPU 2006, compared with SRAM cache memory.

휴대인터넷 서비스 제공을 위한 IEEE 802.16 표준화 동향

  • 예충일;조석헌;차재선;윤철식
    • The Magazine of the IEIE
    • /
    • v.32 no.6 s.253
    • /
    • pp.43-51
    • /
    • 2005
  • 시속 60 km/hour의 시내 주행 속도로 이동하면서도 언제 어디서나 인터넷 서비스를 제공받을 수 있는 휴대인터넷 서비스는 정보통신부 IT839 전략의 일환으로 추진되고 있다. 휴대인터넷 서비스는 2003년부터 HPi (High-speed Portable Internet) 라는 프로젝트 명으로 한국전자통신연구원, 주요 제조업체 및 사업자를 중심으로 규격 및 시스템이 개발되고 있으며 운용 주파수 대역은 2300$\~$2400 MHz of고 TDD (Time Division Duplex), OFDMA (Orthogonal Frequency Division Multiple Access) 방식을 사용한다. 휴대인터넷과 관련된 표준화 기구로는 IEEE 802.16 및 TTA PG302가 있다. 휴대인터넷 서비스 제공을 위한 국내 규격은 IEEE 802.16 표준과의 호환성이 완벽하게 유지되어야 한다. IEEE 802.16 표준은 성격상 프로파일 설정에 따라 다양한 형태의 시스템 형상이 가능하다. 따라서 TTA PG302에서 규정되는 표준은 IEEE 802.16 표준의 완전한 부분집합으로 정의되고 PG302 표준화 활동은 규격 작업과 더불어 시스템 형상 및 성능 검증을 위한 프로파일 및 컨포먼스 테스트를 위한 작업이 포함된다. 본고에서는 휴대인터넷과 관련된 IEEE 802.16 표준화 동향을 소개하고 향후 방향을 전망해 본다.

  • PDF

A linear program approach for optimizing a linear function over an efficient set (유효해집합 위에서의 최적화 문제를 위한 선형계획모델에 관한 연구)

  • Song, Jung-Hwan
    • Journal of Korean Institute of Industrial Engineers
    • /
    • v.26 no.3
    • /
    • pp.220-226
    • /
    • 2000
  • The problem (P) of optimizing a linear function $d^Tx$ over the set of efficient points for a multiple objective linear program (M) is difficult because the efficient set is nonconvex. There are some interesting properties between the objective linear vector d and the matrix of multiple objectives C and those properties lead us to establish criteria to solve (P) with a linear program. In this paper we investigate a system of the linear equations $C^T{\alpha}$ = d and construct two linearly independent positive vectors u, v such that ${\alpha}$ = u - v. From those vectors u, v, solving an weighted sum linear program for finding an efficient extreme point for the (M) is a way of getting an optimal solution of the problem (P). Therefore the theorems presented in this paper provided us an easy way of solving nonconvex program (P) with a weighted sum linear program.

  • PDF

Development of textured Ni and Ni alloy(Ni-W and Ni-Cu) substrates for YBCO coated conductor (YBCO 박막선재용 Ni 및 Ni 합금 기판의 집합도 분석)

  • 지봉기;김민우;김찬중
    • Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
    • /
    • 2003.10a
    • /
    • pp.24-26
    • /
    • 2003
  • We fabricated Ni and Ni alloy substrates for YBCO coated conductors. The Ni and Ni alloy substrate was fabricated by powder metallurgy technique and cold rolling. The texture of substrates had a strong 4-fold symmetry and [111]∥ND texture after annealing temperature of 100$0^{\circ}C$. The measured full-width half-maximum (FWHM) of in-plane and out-of-plane was in the range of 6$^{\circ}$-10$^{\circ}$. The powder metallurgy technique is fabrication of the substrates for considered to be suitable for the application of YBCO coated conductors.

  • PDF

A Method for Minimizing the Number of Internal States in Incompletely Specified Sequential Networks (불완전하게 규제된 순서회로의 내부상태의 간단화방법)

  • 고경식
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.4 no.3
    • /
    • pp.2-8
    • /
    • 1967
  • A method is illustrated for minimizing the number of internal states in incompletely specified sequential networks. The starting point for minimizing technique in this paper is the set of maximal compatibility classes which covers the original flow table and the minimal covering can be obtained directly by employing three rules. The reduction techniques for prime implicant table or covering and closure table are not employed in this paper. Although the minimizing technique is applied to some specific problems, it is believed that the concepts are general in nature and can be applied to any type of incompletely specified flow tables.

  • PDF

Quantum Mechanical Calculation of Two-Dimensional Electron Gas Density in AlGaAs/GaAs/AlGaAs Double-Heterojunction HEMT Structures (AlGaAs/GaAs/AlGaAs 이중 이종집합 HEMT 구조에서의 2차원 전자개스 농도의 양자역학적 계산)

  • 윤경식;이정일;강광남
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.29A no.3
    • /
    • pp.59-65
    • /
    • 1992
  • In this paper, the Numerov method is applied to solve the Schroedinger equation for $Al_{0.3}Ga_{0.7}AS/GaAs/Al_{0.3}Ga_{0.7}As$ double-heterojunction HEMT structures. The 3 subband energy levels, corresponding wave functions, 2-dimensional electron gas density, and conduction band edge profile are calculated from a self-consistent iterative solution of the Schroedinger equation and the Poisson equation. In addition, 2-dimensional electron gas densities in a quantum well of double heterostructure are calculated as a function of applied gate voltage. The density in the double heterojunction quantum well is increased to about more than 90%, however, the transconductance of the double heterostructure HEMT is not improved compared to that of the single heterostructure HEMT. Thus, double-heterojunction structures are expected to be suitable to increase the current capability in a HEMT device or a power HEMT structure.

  • PDF

The Effect of Strain Rate on Texure Formation Behaviors in AZ80 Magnesium Alloy (고온변형 중의 AZ80 마그네슘합금의 집합조직 형성거동에 영향을 미치는 변형속도의 영향)

  • Bae, Sangdae
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.33 no.6
    • /
    • pp.296-302
    • /
    • 2020
  • Magnesium alloys have been rapidly attracting as lightweight structural material in various industry fields because of having high specific strength and low density. It is well known that the crystallographic texture plays an important role in improvement of poor room temperature ductility of magnesium alloys. In this study, high-temperature plane strain compression deformation was conducted on extruded AZ80 magnesium alloy at 723K by varying the strain rates ranging from 5.0×10-3s-1 to 5.0×10-2s-1 in order to investigate the behaviors of texture formation. It was found that texture formation behaviors in three kinds of specimens were affected by continuous and discontiuous deformation mechanism.

Development of Gait Recognition System (보행인식 시스템 개발)

  • Han, Y.H.
    • Journal of rehabilitation welfare engineering & assistive technology
    • /
    • v.8 no.2
    • /
    • pp.133-138
    • /
    • 2014
  • In this paper, a simple but efficient gait recognition method using spatial-temporal silhouette analysis is proposed. For each image sequence, a background subtraction algorithm and a PBAS(pixel based adaptive segmenter) procedure are first used to segment the moving silhouettes of a walking figure. Then, to identify people, the step count and stride length of walking figure is obtained in silhouette images. Experimental results on a CASIA dataset including 124 subjects demonstrate the validity of the proposed method. Also, the proposed system are believed to have a sufficient feasibility for the application to gait recognition.

  • PDF

Generating Literature-Style Sentences based on Summarized Text (요약문 기반 문학 스타일 문장 생성)

  • Bugwang Choe;Eunchan Lee;Sangtae Ahn
    • Annual Conference on Human and Language Technology
    • /
    • 2022.10a
    • /
    • pp.67-70
    • /
    • 2022
  • 최근 자연어 생성 연구는 딥러닝 기반의 사전 학습 모델을 중심으로 활발하게 연구되고 있다. 하위 분야 중 하나인 텍스트 확장은 입력 텍스트를 출력에 잘 반영하는 것이 무엇보다도 중요하다. 기존 한국어 기반 텍스트 확장 연구의 경우 몇 개의 개념 집합에 기반해 문장을 생성하도록 한다. 그러나 이는 사람의 실제 발화 길이에 비해 짧고 단순한 문장만을 생성한다는 문제점이 존재한다. 본 논문은 이러한 문제점을 개선하면서 문학 스타일의 문장들을 생성하는 모델을 제안하였다. 또한 동일 모델에 대해 학습 데이터의 양에 따른 성능도 비교하였다. 그 결과, 짧은 요약문을 통해 문학 스타일의 여러 문장들을 생성하는 것을 확인하였고, 학습 데이터를 추가한 모델이 성능이 더 높게 나타나는 것을 확인하였다.

  • PDF

The Effect of Junction Depth on the Charge Density in $n^+ -p$ junction with Consideration of Position dependent Dielectric Constant ($n^+ -p$ 접합에서 위치함수인 유전율을 고려한 경우 접합깊이가 전하밀도에 미치는 영향)

  • Kim, Choong Won;Han, Baik Hyung
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.24 no.2
    • /
    • pp.260-264
    • /
    • 1987
  • We examine the effect of junction depth on the charge density solving numerically the general form of Poisson's equation for Gaussian $n^{+}$-p junctions. We also present an analytical model for the charge diopole due to the variation of the dielectric constant with doping.

  • PDF