• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.11
• /
• pp.1407-1413
• /
• 2019

In this paper, we assume that another transmitter can transmit its data signal in the same frequency band in order to maximize the frequency efficiency of non-orthogonal multiple access(NOMA) systems. We also focus on the improvement in fairness performance of receiver's data rates, not the maximization of sum data rate for NOMA systems. Thus, in this paper, we propose a power allocation scheme to enhance the fairness performance of average data rates of receivers considering the NOMA systems in the presence of interference. Assuming Rayleigh fading channels, the average data rates of receivers are defined, and the power allocation coefficients to improve the data-rate fairness are derived by using high signal-to-noise power ratio approximation. In addition, through simulations, it is shown that the proposed power allocation scheme can improve the data-rate fairness in the NOMA system with interference.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.344-351
• /
• 2023

The membrane separation process for carbon dioxide capture from hydrogen reformer exhaust gas has been developed. Using a commercial membrane module, a multi-stage process was developed to achieve 90% of carbon dioxide purity and 90% of recovery rate for ternary mixed gas. Even if a membrane module with being well-known properties such as material selectivity and permeability, the process performance of purity and recovery widely varies depending on the stage-cut, the pressure at feed and permeate side. In this study, we verify the limits of capture efficiency at single-stage membrane process under various operating conditions and optimized the two-stage recovery process to simultaneously achieve high purity and recovery rate.

• Journal of IKEEE
• /
• v.22 no.1
• /
• pp.98-103
• /
• 2018

The CNTFET, which is widely recognized as a next-generation semiconductor, has a structure that can improve performance by positioning CNTs between the source and drain of a conventional MOSFET. However, positioning CNTs increases the complexity of a CNTFET's structure, and the process variation changes the complex structure into various shapes; so, when CNTFET device performance is analyzed, it requires more computation than that of a conventional MOSFET. These problems greatly increase the simulation time necessary for the analysis, and sometimes that analysis cannot be performed using an existing tool; they are therefore important obstacles to designing a circuit using a CNTFET. In this study, we will show that the existing Linear Programming methodology can be utilized to solve the long simulation time problem and discuss the effect of the suggested method in detail. Simulation results show that the Linear Programming method can reduce the number of simulation about 2.5 times when the maximum number of CNT is changed from 6 to 12.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.105-110
• /
• 2009

IZO thin films have been deposited on poly(ethylene terephthalate) flexible substrate under varying radio frequency (rf) power, process pressure and thickness of IZO films using rf magnetron sputtering under $Ar/O_2$ gas mix. As the process pressure increased, the deposition rate was slightly increased and the transmittance showed little change, but the resistivity was increased. With increasing rf power, the great increase in deposition rate was observed but the transmittance showed a slight change only, and the resistivity was decreased. In addition, an attempt was made to find the optimal thickness of IZO films under varying the thickness of IZO films at the process conditions of 1 mTorr pressure and 90 W rf power, which showed lowest resistivity. IZO thin films with the thickness of $1,500{\AA}$ showed lowest resistivity and also showed highest transmittance around the wavelength zone of the maximum absorption. The power conversion efficiency of solar cells fabricated using various transparent electrodes with different thicknesses were measured and the solar cell with IZO electrode of $1,500{\AA}$ showed the maximum conversion-efficiency of 2.88 %.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.299-312
• /
• 2019

This study examined the effect of media and personal frames on readers' attitude towards newspaper articles and on their perceived fairness. Study 1 examined the frame effects with the issue of the Candlelit Protest in 2008 and Study 2 did with the issue of the Four Major Rivers Restoration Project. Results indicated that in both studies two frames had main effects on readers' attitude and yet their interaction was not significant. In both studies, effects of personal frame were partially significant on the perceived fairness of the article, but main effects of media frame and interaction effects between two frames were not significant. These findings demonstrated that readers' attitude towards newspaper articles and on their perceived fairness would be influenced by their headlines and their source along with their content.

• Journal of Bio-Environment Control
• /
• v.18 no.2
• /
• pp.87-94
• /
• 2009

This study was conducted to develop an automation system of inoculation processing of a lily callus. The results are summarized as followings: The end-effector was manufactured as suction and machine type. And these end-effectors can separate the callus from the mediums and divide the separated callus and then inoculate the divided callus to new mediums. Using the machine type end-effect0r, the results of the experiment showed the success rate in the division process was 100% while the separation and inoculation process was 92%. To develop the automation controller of inoculation process, the system was developed to control an external device and the manipulator. The data communication program between a robot and a personal computer was also developed using CAsyncsocket and Ethernet Interface.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.10
• /
• pp.917-925
• /
• 2016

Schmitt Trigger logic is a gate level design method to have hysteresis characteristics to improve noise immunity in digital circuits. Dynamic Threshold voltage MOS(DTMOS) Schmitt trigger circuits can improve noise immunity without adding additional transistors but by controlling substrate bias. The performance of DTMOS Schmitt trigger logic has not been verified yet in standard CMOS process through measurement. In this paper, DTMOS Schmitt trigger logic was implemented and verified using Magna $0.18{\mu}m$ MPW process. DTMOS Schmitt trigger buffer, inverter, NAND, NOR and simple digital logic circuits were made for our verification. Hysteresis characteristics, power consumption, and delay were measured and compared with common CMOS logic gates. EM Immunity enhancement was verified through Direct Power Injection(DPI) noise immunity test method. DTMOS Schmitt trigger logics fabricated using CMOS process showed a significantly improved EM Immunity in 10 M~1 GHz frequency range.

• Membrane Journal
• /
• v.30 no.6
• /
• pp.385-394
• /
• 2020

In the gas separation process, the separation membranes have to not only show high gas transport and selectivity but also exhibit exceptional stability at high temperature and pressure. However, when the polymeric membranes (particularly, glassy polymers) are exposed to the condensable gases (i.e., CO2, H2S, hydrocarbon, etc.), the polymer chains are prone to swell, leading to low stability. As a result, the plasticization behavior reduces the gas selectivity in the separation of mixture gases at high pressures and thus results in limited applications to the separation processes. To address these issues, many strategies have been studied such as thermal treatment, polymer blending, thermally rearrangement, mixed-matrix membranes, cross-linking, etc. In this review, we will understand the plasticization behavior and suggest potential methods based on the previously reported studies.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.495-508
• /
• 2023

To compare whether broadcast fact-checking news, which aims to overcome the limitations of objective reporting, ensures fairness, we analyzed 227 fact-checked news stories aired on the main news of KBS, MBC SBS, TV Chosun, JTBC MBN, and YTN from January 1, 2022 to May 31, 2022, when the 20th presidential and local election campaigns were held. The analysis showed clear differences in fact-checking targets and narratives by broadcasters. In general, MBC, JTBC,and YTN were more likely to favor liberal parties such as the Democratic Party, while TV Chosun had a lot of narratives favoring the conservative camp. SBS and MBN were relatively neutral. KBS seemed to be trying to remain outwardly neutral. SBS and TV Chosun were the most active in fact-checking, but they covered a wide range of issues and were characterized by a bias toward contextualizing issues that viewers were curious about, rather than clarifying the facts. The projection of ideological bias by broadcasters in fact-checking narratives is a challenge that needs to be overcome.

• Korean Journal of Materials Research
• /
• v.6 no.9
• /
• pp.963-971
• /
• 1996

세라믹 강화 복합 재료의 모재로서 사용되는 무정형 PEEK가 보여주는 self-bonding 현상의 주 기구인 PEEK체인들의 확산(interdiffusion)과 뒤엉킴(entanglement)이 일어나기 위하여 PEEK의 접합 면에서 반드시 선행되어 일어나야 하는 젖음성의 정도에 미치는 접합 공정 변수의 영향을 C-mode acoustic microscopy를 이용하여 고찰하였다. 또한 self-bonding 된 PEEK시편들의 전단 변형시 전단 하중의 증가에 따라 일어나는 접합 면에서의 debonding 정도를 측정함으로써 접합 면에서 일어나는 파괴 거동을 관찰하였다. 각각의 접합 조건에서의 젖음성의 정도는 시간과 압력의 증가에 따라 다소 증가함을 보여 주었으나, 접합 온도와는 거의 무관함을 보여 주었다. 또한 전단 파괴 시험시 각각의 접합 조건 하에서 개발된 self-bonding강도의 80%-90%이상의 전단 하중이 가해진 후부터 debonding이 시작되어, 이 후 하중이 증가함에 따라 급속도로 진행되어 파괴가 일어남을 알 수 있었다.