• Management & Information Systems Review
• /
• v.34 no.1
• /
• pp.143-162
• /
• 2015

The purpose of this study was to investigate the structure relationship through the empirical analysis between the factors that affect the perception of the consumer for the fair trade products. Most of the previous research on consumer reactions associated with fair trade products are limited to certain situations that are characterized as exploratory look. Specifically, this study suitability as a key factor associated with consumer awareness of the fair trade products through review of the literature, reliability, consumption values, attitudes and purchase intention presentation, and was to examine the effect relationship. Although most of the theories are employed through empirical analysis, the relationship between reliability and purchase intention (H5), there was no statistically significant effect relationship. The results of this study are expected to provide significant implications in the establishment of the company's marketing strategy to sell fair trade products with the comprehensive understanding of the consumer recognition of the fair trade products.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.218.2-218.2
• /
• 2014

그래핀은 높은 전기 전도도와 열전도도, 기계적 강도를 가지고 있고 동시에 높은 전자이동도($200,000cm^2{\cdot}V{\cdot}^1{\cdot}s{\cdot}^1$) 특성을 갖는 물질로써 차세대 소재로 각광받고 있다. 하지만 그래핀을 소자에 응용하기 위해서는 전사공정과 lithography 공정 과정에서 발생되는 PMMA(Poly methyl methacrylate) residue를 완벽하게 제거해야 하는 문제점이 있다. 특히, lithography 공정 중 완벽하게 PMMA residue 가 제거되지 않고 잔류해 있을 경우에 소자의 life time, performance에 악영향을 준다는 보고가 있다. 이와같은 문제를 해결하기 위해 화학적 cleaning, 열처리를 통한 cleaning, 전류 인가에 의한 cleaning과 같은 방법들을 이용하여 그래핀의 PMMA residue를 제거하는 공정들이 보고되고 있지만, 화학적 cleaning 방법의 경우 chloroform 이라는 독성물질 사용으로 인해 산업적으로 응용이 어렵고, 열처리 방법은 전극 등의 금속이 $200^{\circ}C$ 이상의 높은 온도에서 장시간 노출될 경우 쉽게 손상을 입으며, 전류 인가에 의한 cleaning 방법은 국부적으로만 효과를 볼 수 있기 때문에 lithography 공정 후 PMMA residue를 효과적으로 제거하기에는 한계를 보이고 있다. 본 연구에서는 Ar을 이용하는 Ion beam 시스템을 통해 beam energy를 제어함으로써 PMMA residue를 효과적으로 제거하는 연구를 진행하였다. 최적화된 플라즈마 발생 조건을 찾기 위해 QMS(Quadrupole Mass Spectrometer)를 이용하여 입사하는 ion energy와 flux 양을 컨트롤 하였고, 250 W에서 최적화된 ion energy distribution 영역이 존재한다는 것을 확인할 수 있었다. 또한, 25 Gauss 정도의 electro-magnetic field를 이용하여 Ar의 ion energy를 10 eV 이하로 낮추어 damage를 최소화함으로써 효과적으로 그래핀을 cleaning 할 수 있었다. Cleaning과정에서 ion bombardment에 의해 발생한 damage는 $250^{\circ}C$에서 6시간 동안 annealing 공정을 거치면서 회복되는 것을 Raman spectroscopy의 D peak ($1335cm{\cdot}^1$) / G peak ($1572cm{\cdot}^1$) ratio 로 확인할 수 있었고, PMMA residue의 cleaning 여부는 G peak ($1580cm{\cdot}^1$)의 blue shift와 2D peak ($2670cm{\cdot}^1$)의 red shift를 통해 확인하였다. 그리고 AFM (Atomic Force Microscopy)을 이용하여 cleaning 공정과정에서 RMS roughness가 4.99 nm에서 2.01 nm로 감소하는 것을 관찰하였다. 마지막으로, PMMA residue의 cleaning 정도를 정량적으로 분석하기 위해 XPS (X-ray Photoelectron Spectroscopy)를 이용하여 sp2 C-C bonding이 74.96%에서 87.66%로 증가함을 확인을 할 수 있었다.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2001.04a
• /
• pp.201-205
• /
• 2001

본 연구에서는 한지가공공정의 하나인 도침공정을 현대의 칼렌다링 공정과 비교 분석을 실시한다. 도침은 커다란 나무뭉치를 사용하여 반복적으로 여러 장이 겹쳐 진 한지를 두두림으로서 한지 표면을 평활하게 하며, 광택도를 높이는 효과를 볼 수 있다. 나무뭉치는 밑면이 평활해야만 할 것이다. 보통 한지 제조업자들은 경험 을 토대로 얼마만큼의 도침이 필요한지 결정하고 실시하곤 한다. 이러한 도침공정 에서 현대의 칼렌다링이 할 수 없는 중요한 공정이 존재한다면, 현대의 초지기에도 이러한 원리를 적용함으로써 효과적인 종이의 품질개선을 이룰 수 있는 여지가 충 분히 있다고 판단된다. 한지에 있어서 도침의 역할이 무었인지, 도침은 칼렌다링으 로 대치할 수 있는 지 둥을 비교 검토하였다. 도침공정 연구를 위하여 라이너지 한 종류, 백상지 한종류, 최근에 제조된 전통 한지 세 종류를 사용하였다. 라이너지와 백상지는 일반 제지공장에서 제조되는 방 식을 그대로 사용하여 기계 칼렌다를 통과한 샘플을 얻었으며 칼렌다를 통과하지 않은 라이너지와 백상지를 특별히 같은 지종에서 얻어서 실험을 실시하였다. 기계 칼렌다링을 하지않은 라이너지와 백상지 세 종류의 전통한지는 실험실 칼렌다를 통과시켰고, 또 각각에 도침을 실시하였다. 샘플들의 기본 물성과 처리조건을 표 1 에 정리하였다. 도침 공정에서 사용한 나무 뭉치의 무게는 약 64Kg 이며, 최대 높이 41cm 로 들어올려져 자유낙하에 의한 충격을 종이에 가하였고, 분당 충격횟수는 63회 였다. 라이너지는 도침 및 칼렌다에 의해 밀도가 서서히 증대되는 것을 볼 수 있었다 (그림 1). 도침은 칼렌다에 비해 밀도 증대에 효과적이지는 못하였다. 반면 백상 지에서는 도침이 기계 칼렌다나 실험실 칼렌다보다 현저히 크게 밀도를 증대시킴을 볼 수 있었다 (그림 2). 칼렌다는 종이를 높은 전단력과 압축력으로 변형시키는데 비해 도침은 단순히 압축 압력만을 종이에 가하는 것이 다르다고 볼 수 있는데, 라 이너지와 백상지가 같은 조건하에서 왜 이러한 큰 차이를 보이는 이유를 아직 알수 없다.

• Management & Information Systems Review
• /
• v.36 no.2
• /
• pp.59-79
• /
• 2017

The purpose of this study is to verify the relationship between consumer 's self - determination psychological needs (autonomy, competence, and relevance) related to fair trade and brand equity related to fair trade products through empirical analysis. It is meaningful that it is linked to strategic brand management based on consumer need satisfaction. As a result of empirical analysis of this study, Fair Trade attitude plays an important role in the relationship between self - determination psychological desire and brand equity. Especially, Consumer need Satisfaction with competence was found to be a strategically important construct. Based on the results of this study, it is expected to provide important implications for future strategic management of brand equity related to Fair Trade products.

• KSBB Journal
• /
• v.23 no.6
• /
• pp.504-508
• /
• 2008

The objectives of this study were to develope the economical process for bioethanol production from domestic triticale and investigate optimal fermentation conditions such as temperature, time, and enzyme concentration used to pre-treatment process. Triticale mash, containing 148 g of total sugar per 1 L of mash, was fermented with Saccharomyces cerevisiae CHY1011 at $33^{\circ}C$. Fermentation of mash supplemented with enzyme was completed within 48-60 hours, and the ethanol yield was 410.9 L/tonne of dry base. On the other hand, fermentation of mash without enzyme addition was completed within 36-48 hours, but the ethanol yield was 342.2 L/tonne of dry base. For optimal bioethanol production from triticale, viscosity reduction enzyme was added in the pre-treatment process, and the fermentation rate of triticale was 92.0-94.2%. In addition, the results showed that bioethanol production of triticale by low-temperature pre-treatment would provide higher ethanol production efficiency and lower operating costs.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.9
• /
• pp.1117-1122
• /
• 2019

In this paper, a power allocation scheme is proposed to improve the fairness of user data rates in downlink non-orthogonal multiple access systems with one base station and two users. In particular, the power allocation scheme is presented to maximize the fairness of average user data rates assuming independent Rayleigh fading channels, where the fairness maximization is achieved when the average user data rates are equal. For the fairness evaluation, hence approximate expressions for the average user data rates and the average sum date rate of the proposed scheme are provided by using high signal-to-noise ratio approximation. Through simulation investigation, the derived approximate expressions for the average data rates are verified, and it is shown that the proposed scheme is superior to the conventional power allocation schemes in terms of the fairness of the average user data rates.

• Composites Research
• /
• v.34 no.1
• /
• pp.23-29
• /
• 2021

Commercialized carbon fiber obtained from polyacrylonitrile(PAN) precursor is subjected to oxidation stabilization at 180 to 300℃ in air atmosphere and carbonization process at 1600℃ or lower in inert gas atmosphere. Both of these processes use a lot of time and high energy, but are essential and important for producing high-performance carbon fibers. Therefore, in recent years, an alternative stabilization technology by being assisted with various other energy sources such as plasma, electron beam and microwave which can shorten the process time and lower energy consumption has been studied. In this study, the PAN precursor was stabilized by using plasma treatment and heat treatment continuously. The morphology, structural changes, thermal and physical properties were analyzed using Field emission scanning electron microscopy(FE-SEM), X-ray diffraction(XRD), Fourier transform infrared(FT-IR), Thermogravimetric analysis(TGA) and Favimat.

• Journal of the Korea Society for Simulation
• /
• v.19 no.1
• /
• pp.1-11
• /
• 2010

K company produces semiconductor package products under the make-to-order policy to supply for domestic and foreign semiconductor manufacturing companies. Its production process is a machine-paced assembly line type, which consists of die sawing, assembly, and test. This paper suggests three plans to increase process throughput based on the process analysis of K company and evaluates them via a simulation model using a real data collected. The three plans are line balancing by adding machines to the bottleneck process, product group scheduling, and reallocation of the operators in non-bottleneck processes. The evaluation result shows the highest daily throughput increase of 17.3% with an effect of 2.8% reduction of due date violation when the three plans are applied together. Payback period for the mixed application of the three plans is obtained as 1.37 years.

• Journal of Korea Society of Industrial Information Systems
• /
• v.14 no.4
• /
• pp.1-7
• /
• 2009

This paper presents a process routing (PR) algorithm with multiple objectives. PR determines the optimum sequence of operations for transforming a raw material into a completed part within the available machining resources. In any computer aided process planning (CAPP) system, selection of the machining operation sequence is one of the most critical activities for manufacturing a part and for the technical specification in the part drawing. Here, the goal could be to generate the sequence that optimizes production time, production cost, machine utilization or with multiple these criteria. The Pareto Stratum Niche Cubicle (PS NC) GA has been adopted to find the optimum sequence of operations that optimize two conflicting criteria; production cost and production quality. The numerical analysis shows that the proposed PS NC GA is both effective and efficient to the PR problem.

• Korean Journal of Construction Engineering and Management
• /
• v.20 no.6
• /
• pp.98-106
• /
• 2019

Recently, the number of project delay-related claims and disputes in Korean construction projects has been increasing rapidly. This suggests that the domestic construction contract practice, which has traditionally been superior to the client, is changing into a mutually balanced relationship among the contracting parties. The project delay analysis selects the application method according to the type of schedule approved at the start of the construction and how the schedule management was performed during the construction. The most important prerequisite for project delay analysis is that a complete CPM schedule agreed at the beginning of the construction is prepared and the actual progress of such schedule is well documented. This study is about applying the project delay analysis methodology of a case where a contractor claims damages to a client while constructing a large new private building construction project. In this study, it is determined whether the application of the as-planned analysis method is appropriate to the incomplete CPM schedule and then proposes the as-planned vs. as-built analysis method based on the new standard as an alternative. Next, apply the as-planned vs. as-built analysis method to the schedule in the case project, and then compare it with the result of the as-planned analysis method. The purpose of this study is to suggest a project delay analysis method suitable for the domestic schedule management practices, so that it can be used as a meaningful reference in project delay disputes and litigations of domestic construction projects.