• 한국해양공학회지
• /
• 제18권4호
• /
• pp.59-64
• /
• 2004

Functional requirements and design parameters were not clarified in the early design process. Design axiom shows some difficulty for larger system designs, such as the butterfly valve, which is basically carried out by an incremental and iterative process. A numerical analysis was carried out on fluid flows in a butterfly valve, by using ANSYS-FLOTRAN. Characteristics of the butterfly flows at different valve disk opening angles, with a uniform incoming velocity, were investigated. The entire analysis is decomposed to satisfy the independence axiom. This paper resolves the problems associated with the establishment of a systematic design process.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.299-304
• /
• 2005

This paper describes the conceptual of device attached to rotary type sliding door system satisfying customer's reguirements. The TRIZ (Russian theory of Inventive Problem Solving) and Axiomatic Design methods are used for generating new ideas at the conceptual design stage efficiently. The ideas will be implemented in real products.

• 대한기계학회논문집A
• /
• 제31권1호
• /
• pp.77-88
• /
• 2007

Axiomatic Design has been developed as a general design framework during past two decades and TRIZ has been developed for a design tool over 50 years. Axiomatic design is quite excellent in that design should be decoupled. When a design matrix is established, the characteristics of the design are identified according to the coupling properties. If the design is coupled, a decoupling process should be found. However, axiomatic design does not specifically indicate how to decouple a coupled design. In this research, the coupling manner is classified into six patterns. Each pattern could be solved by an appropriate TRIZ module. A table, which matches the coupling pattern and a TRIZ module, is proposed for effective application of the two design theories. The decoupling ideas are proposed by using TRIZ modules. When the number of decoupled designs is more than one, the engineer should select the final idea. The proposed method is applied to practical cases such as a tape feeder and a beam adjuster of the laser marker.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1028-1033
• /
• 2008

The mount type HVAC control system is a type of an HVAC control system which is installed between a ceiling and ceiling boards of a room to control room temperature. Although the device is quite popular, design is conducted by a conventional way where engineering intuition and experiences are utilized. It is found that the design process is fairly inefficient and time-consuming because there are a lot of feedbacks. The axiomatic approach is used to investigate the design characteristics of the mount type HAVC control system and the Independence Axiom is utilized for the investigation. The Overall hierarchy is established up to the level of parts. It is found that the current design has many coupled and redundant aspects. The hierarchy is reorganized based on the Independence Axiom and a new design process is found. To exploit the new design process in practice, a design manual is made.

• 한국산업융합학회 논문집
• /
• 제10권3호
• /
• pp.171-177
• /
• 2007

It is well known that mobile phones have been a indispensable communication tool for human life. The spiral springs are used as the main component of the semi-auto sliding mechanism of mobile phones. The characteristic of axiomatic approach is scientific and analytical method, and axiomatic approach is different from other design methods in offering the systematic method at an early stage of design. The axiomatic approach could determine design parameter and arrange the order of design and estimate the optimum design in good order. In axiomatic approach, the composition is divided by customer requirement, functional requirement, design parameter, and design matrix in large portion. This paper presents design in sliding mechanism for mobile phones by finite element method and axiomatic design.

• 대한기계학회논문집A
• /
• 제28권9호
• /
• pp.1368-1383
• /
• 2004

Robust design has been developed with the expectation that an insensitive design can be realized. That is, a product designed by robust design should be insensitive to external noises or tolerances. Robust design can be classified into three methods: (1) The Taguchi method (2) robust optimization (3) robust design by the axiomatic approach. In this paper, each method is reviewed and investigated. Pros and cons fur each method are discussed and a future direction for development is proposed.

• 대한기계학회논문집A
• /
• 제37권2호
• /
• pp.193-198
• /
• 2013

제품은 하나 이상의 부품으로 구성되어 있으며, 제품을 구성하는 부품들은 같은 기능을 갖는 경우도 있다. 부품통합설계 가설에 의하면 같은 기능을 하는 부품은 하나의 부품으로 통합될 수 있다. 제품을 구성하는 부품은 하나 이상의 기능을 가지고 있는 경우가 있으며, 부품의 형상 자체가 기능이 되거나 부품의 재질이 갖는 특성이 기능이 되기도 한다. 본 논문에서는 부품이 가지고 있는 기능을 정의하는 방법을 제시하고, 제시된 방법에 의하여 확인된 부품의 기능들 중에서 동일 기능을 갖는 부품을 통합하는 방법을 제시하였다. 또한 제시된 방법을 이용하여 종이에 구멍을 뚫는 3 공 천공기를 구성하는 부품들을 통합해 보았으며 그 결과는 공리적 설계를 만족하였다.

• 경영과학
• /
• 제29권3호
• /
• pp.45-65
• /
• 2012

Test and evaluation of weapon system is an important task to evaluate the performance of overseas weapon system purchasing project. Especially, quantitative evaluation of performances is hardly completed in defense projects where multiple criteria are conflicted each other. In order to solve this problem, we apply Axiomatic Design (AD) and Inner Dependence AHP method. First, finite functional requirements (FRs) are categorized in hierarchy structure by selecting proper design parameters (DPs) to implement their corresponding FRs. If there are no ways to select DPs when design is coupled between FRs and DPs, then inner dependence is allowed to overcome the strict rule of independence in AHP. Second, the weights of DPs are calculated by applying both Inner Dependence AHP method for coupled design and normal AHP method for uncoupled or decoupled design. Finally, information axiom of AD is applied to the proposed weapon systems by calculating information contents for all parameters. Weapon system with minimum sum of information contents is considered as the best solution. The proposed method in this study should be used in multiple criteria decision making problems involving various conflicting criteria.

• 한국군사과학기술학회지
• /
• 제14권3호
• /
• pp.441-457
• /
• 2011

In this study, the axiomatic design(AD) method is applied to construct the hierarchical structure of evaluation criteria and the AHP method is used to calculate the weights of criteria in order to develop the proposal evaluation index for the overseas weapon system purchasing projects. The common evaluation items as main categories are selected through the review of evaluation criteria from the previous works and projects, relevant regulations and defense policy, and the design matrix using fuzzy concept is established and evaluated by the expert group in each design phase to determine the independency, that is the satisfaction of decoupled or uncoupled design, for each criteria in the same hierarchy when they are derived from the main categories. The establishment of decoupled or uncoupled design matrix provides mutually exclusiveness of how small number of DPs can be accounted for FRs within the same hierarchy. The proposal evaluation index developed in this study will be used as a general proposal evaluation index for the overseas weapon system purchasing projects which there are no systematically established evaluation tools.

• 대한기계학회논문집A
• /
• 제31권10호
• /
• pp.999-1008
• /
• 2007

The spacer grid set is a component in the nuclear fuel assembly. The set supports the fuel rods safely. Therefore, the spacer grid set should have sufficient strength for the external impact forces such as earthquake. The fretting wear occurs between the spring of the fuel rod and the spacer grid due to flow-induced vibration. Conceptual design of the spacer grid set is performed based on the Independence Axiom of axiomatic design. Two functional requirements are defined for the impact load and the fretting wear, and corresponding design parameters are selected. The overall flow of design is defined according to the application of axiomatic design. Design for the impact load is carried out by using nonlinear dynamic analysis to determine the length of the dimple. Topology optimization is carried out to determine a new configuration of the spring. The fretting wear is reduced by shape optimization using the homology theory. The deformation of a structure is called homologous if a given geometrical relationship holds before, during, and after the deformation. In the design to reduce the fretting wear, the deformed shape of the spring should be the same as that of the fuel rod. This condition is transformed to a function and considered as a constraint in the shape optimization process. The fretting wear is expected to be reduced due to the homology constraint. The objective function is minimizing the maximum stress to allow a slight plastic deformation. Shape optimization results are confirmed through nonlinear static analysis.