• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.6
• /
• pp.13-24
• /
• 1988

본 해설에서는 공기저항을 감소하기 위하여 위에서 열거한 점들을 고려한 공기역학적인 연구를 행함으로써 항력계수를 0.153까지 낮게한 Ford사의 프루우브IV 개발과 그 결과에 대하여 서술하고자 한다. 우선 일반적인 공기역학적 설계를 위한 연구에 대하여 서술하고 풍동실험을 반복한 결과로 보완된 부분에 대하여 설명한후 최종적인 차에 대한 풍동실험 결과를 서술하는 순서로 한다.

• Proceedings of the KSLP Conference
• /
• 1994.06a
• /
• pp.87-92
• /
• 1994

- 발성의 공기역학적 측면은 다음 4가지의 인자에 의하여 특징지어진다. a. 성문하부압(Subglottal pressure) b. 성문상부압(Supraglottal pressure), c. 성문저항(Glottal impedance) d. 성문부위의 공기 체적유속(Volume velocity of air of airflow at the glottis) (중략)

• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.51-57
• /
• 2010

The aerodynamic drag of ultra high-speed train in evacuated tube have been calculated using computational fluid dynamics and the variation of aerodynamic drag for the change of major system parameter of tube-vehicle system such as the train speed, air density, and the tunnel diameter. The aerodynamic drag in the tube increases with increasing train speed, however, the ratio of drag increase in tube is larger than that on the open field, the V square rule. The aerodynamic drag decreases with increasing tunnel diameter and increasing air density, and the drag increasing for air density is almost linear just like that on open field. For some combination of the parameters, the trend of aerodynamic drag of train showed irregularity.

• 한국기계연구소 소보
• /
• s.12
• /
• pp.83-92
• /
• 1984

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 1999.04a
• /
• pp.46-48
• /
• 1999

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2024.01a
• /
• pp.379-382
• /
• 2024

본 논문에서는 위치기반 동역학(Position based dynamics, PBD)을 기반으로 하는 프레임워크를 활용하여 풍선 내 공기로 의한 표면의 회전과 변형을 효율적으로 표현할 수 있는 새로운 방법을 제안한다. 기존의 경우 볼륨 형태인 다면체 메쉬(Tetrahedral mesh)를 활용하여 표면 내부를 모델링 하거나 입자 기반의 유체 시뮬레이션을 통하여 공기역학을 계산해야 되지만, 각각의 동역학뿐만 아니라 상호작용까지 고려해야 되기 때문에 계산양이 커서 다양한 분야에서 활용하기 어렵다. 본 논문에서는 이 문제를 효율적으로 풀어내기 위해 공기의 움직임을 파악하기 위한 유체 시뮬레이션을 계산하지 않고도, 풍선 내 바람에 의한 표면 수축 및 확장을 PBD기반으로 풀어내고, 공기가 빠질 때 나타나는 표면의 회전을 효율적으로 계산할 수 있다. 본 논문에서 제안하는 방법은 정점(Vertex)의 개수가 많은 모델에서도 실시간 처리되는 결과를 보여 줄 수 있기 때문에 게임뿐만 아니라 실시간을 요구하는 물리기반 가상환경 구축에 활용될 수 있다.

• Journal of Bio-Environment Control
• /
• v.5 no.2
• /
• pp.152-159
• /
• 1996

Experiment was performed in a newly developed wind tunnel with light system to determine the aerodynamic resistance and eddy diffusivity above the plug stand under artificial light. Maximum air temperature appeared near the top of the plug stand under artificial light. Since Richardson number was ranged from -0.07 to +0.01, the atmosphere above the plug stand in wind tunnel was in an unstable or near- neutral stability state. The average aerodynamic resistance at rear region of plug stand was 25 % higher than that at middle region. Eddy diffusivity($K_{M}$) linearly increased with the increasing air current speed. $K_{M}$ at air current speed of 0.9 m.$s^{-1}$ was about two times as many as that at air current speed of 0.3 m.$s^{-1}$. And average $K_{M}$ at the rear region was 15% lower than that at the middle region. These results indicated that the diffusion of heat and mass along the direction of air current inside the plug stand was different. It might cause the lack of uniformity in the growth and quality of plug seedlings. The wind tunnel developed in this study would be useful to investigate the effects of air current speed on microclimates and the growth of plug seedlings under artificial light in a semi- closed ecosystem.

• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.44-50
• /
• 2010

This study is devoted to understand the basic characteristics of the flowfield around a train in evacuated tube and to suggest an efficient numerical method to calculate the flowfield. To get steady-state solution in minimum calculation domain, various boundary condition have been tried for steady calculation and have been compared to the solution of unsteady calculation. At the train velocity of 300km/h, the aerodynamic drag results of both calculation method agreed very well. The drag ratio between on the open filed and in the tube from the calculation result by the suggested numerical method lied in the same fitting curve with that from the filed test of high-speed trains running in the line.

• Journal of the Korean GEO-environmental Society
• /
• v.24 no.6
• /
• pp.13-20
• /
• 2023

This paper is aimed to evaluate the mechanical properties and durability of high-flowable retaining wall material (RWM) with different levels of steel fiber (SF) content. To produce the specimens of RWM, some chemical agents such as superplasticizer (SP), air-entrained agent (AEA) and viscosity modifying agent (VMA) were added in the fresh RWM. The compressive and split tensile strength measurements were performed on the hardened RWM specimens at the predetermined periods. Additionally, surface electric resistivity and absorption tests according to ASTM standards were carried out to examine mechanical properties of RWM mixes. The durable performances such as chloride ions penetrability and freezing-thawing resistance of RWM mixes were experimentally investigated. As resutls, it was found that the performance of RWM mix with SF were much better than that without SF, especially at the 2% addition of SF. Thus, it is noted that the proper addition of SF in the RWM mix may have a beneficial effect to improve mechanical properties and durability of RWM mixes.

• Journal of computational fluids engineering
• /
• v.18 no.3
• /
• pp.8-13
• /
• 2013

Drag reduction of a running vehicle is very important issue for the energy savings and emission reduction of its power train. Especially for a solar powered electric vehicle, the drag reduction and weight lightening are two serious problems to be solved to extend its driving distance under the given energy condition. In this study, the ground effect of an airfoil shaped road vehicle was studied for an optimum body design of an ultra-light solar powered electric vehicle. Clark-Y airfoil type was adopted to the body shape of the model vehicle to reduce aerodynamic drag. From the study, it was found that the drag of the model vehicle was reduced as the height(h) between ground and the lower surface of the model vehicle was decreased. It is due to the reduction of the down-wash decreasing the induced drag of the vehicle. The lift was also decreased as the height decreased. It is due to the turbulent boundary layer developed beneath the vehicle body. The drag is classified into two types; the form and friction drag. The fraction of form drag to friction one is 76 to 24 on the model vehicle. As the height(h) of the model vehicle from the ground surface increases the form drag also increases but the friction drag is in reverse.