• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.8
• /
• pp.758-764
• /
• 2015

This paper describes the pattern synthesis of array antenna which conforms to a metallic curved surface formed by the rotation of a quadratic function by using EAGA(Enhanced Adaptive Genetic Algorithm). Three rotated-type conformal surfaces are realized by changing the coefficient of the quadratic function and the pattern of each conformal array antenna is synthesized. In order to reduce the overall time of pattern synthesis, the transformed active element pattern obtained by the active element pattern of the 2-dimensional planar array using Euler angles rotation is utilized instead of the active element pattern of the 3-dimensional conformal array antenna itself. To verify validity of the proposed synthesis procedure, the synthesized patterns using EAGA are compared with those obtained by MWS.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.104-111
• /
• 2017

This research focuses on simulation and visualization of flow field characteristics inside a centrifugal pump. The 3D numerical analysis was carried out by using a numerical CFD tool, addressing a Reynolds Average Navier-Stock code with a standard k-${\varepsilon}$ two-equation turbulence model. The simulation accounts for friction head loss due to rough walls at suction, impeller, discharge areas and volumetric head loss at impeller wear ring. A comparison of performance curves between simulation and experimentation is included, and it reveals a same trend of those results with a small difference of maximum 5 %. At best efficiency point, velocity vectors are smooth but it changes significantly under off-design point, a strong recirculation appears at the outlet of impeller passages near tongue area. A relatively uniform preassure distribution was observed around the impeller in despite of the tongue. Within the volute, because of its geometry, spiral vortexes formed, proving that the flow field in this region was relatively turbulent and unsteady.

• Journal of the Korean Magnetics Society
• /
• v.24 no.2
• /
• pp.56-59
• /
• 2014

The samples of $Ba_2CoZnFe_{12}O_{22}$ was synthesized by the solid-state reaction method. The toroids of $Ba_2CoZnFe_{12}O_{22}$ were sintered with various sintering temperature at 1050, 1100, 1150, and $1200^{\circ}C$, and studied by x-ray diffractometer, vibrating sample magnetometer, network analyzer, and Mssbauer spectrometer. From the XRD patterns, the density of samples increased with increasing sintering temperature. From the magnetic hysteresis curves up to 10 kOe at 295 K, the saturation magnetization ($M_s$) of $Ba_2CoZnFe_{12}O_{22}$ samples in various sintered at 1050, 1100, 1150 ,and $1200^{\circ}C$ were showed around $M_s$= 33.0 emu/g. However, With increasing sintering temperature, the coercivity ($H_c$) of samples decrease. Complex permeability and permittivity of samples in various sintering temperatures were measured between 100MHz to 4 GHz. With increasing sintering temperature, the permeability of samples increase.

• Korean Journal of Materials Research
• /
• v.11 no.3
• /
• pp.164-170
• /
• 2001

The Self-propagating High-temperature Synthesis (SHS) for synthesizing ($Mo_{1-z}$ , $W_{z}$)$Si_2$was conducted experimentally with the mole fraction of Tungsten(W) from z=0.0 to z=0.5. The temperature profile was measured according to the reaction time through the thermocouple that was equipped into the center of these samples. When the reaction front is propagated around the thermocouple, the highest temperature appears and we regard this temperature as the adiabatic temperature. We found out by experimental results that the reaction velocity is in the range of 2.14~1.35mm/sec and the adiabatic temperature is in the range of 1883~1507K for the six samples. The reaction velocity and the adiabatic temperature were inclined to decrease with an increasing of the mole fraction of Tungsten (W). The SHS modeling is presented in order to predict the temperature profiles and these results are compared with the experimental results. It is predicted that in case of increasing the initial temperature of these six samples, the reaction temperature increased and that the sample of z=0.5 needs the preheating up to 800~900K in order to become reaction temperature 1900K.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.15-15
• /
• 2017

하천의 수위와 유량 등의 수리량 자료는 치수, 이수, 환경 등에 관한 하천 계획과 관리의 기초자료로 활용된다. 따라서 체계적인 하천 관리를 위해서는 신뢰성 있는 하천 수리량 자료의 확보가 요구된다. 이에 따라 우리나라에서는 많은 하천에 수위 관측소를 설치하여 실시간 수위를 측정하고 있다. 하지만 유량의 측정은 국가하천 등 주요 대규모 하천에 국한되어 있는 실정이다. 반면에 우리나라 대부분의 홍수 피해는 중 소하천에서 발생하고 있지만, 중 소하천에 대한 수문조사는 상대적으로 매우 미진한 실정이다. 이러한 중 소하천에 대한 수리 정보 조사의 가장 큰 어려움은 대부분의 중 소하천이 지방자치단체에서 관리하고 있어 예산과 인력 지원이 어렵기 때문이다. 이에 본 연구에서는 중 소하천에 산재한 보와 같은 하천 횡단 구조물의 유량 측정 기능을 이용하고, 급성장하고 있는 영상 분석 기술과 IT를 하천공학 분야에 접목하여 중 소하천의 수리 정보를 저비용, 실시간으로 원격 측정하는 시스템을 개발하고자 하였다. 이를 위해 연구에서는 저가형 영상 장비를 이용하여 하천 횡단구조물 주변의 흐름 영상을 원격으로 확보하고, 해당 영상을 데이터베이스로 송신하는 장치인 WIA 시스템(wireless image acquisition system)을 개발하였다. 그리고 촬영된 영상을 분석하여 수위를 도출하는 영상 분석 프로그램, 수위-유량 관계 곡선(rating curve), 미계측 지점에 대한 하천 수리 정보를 계산하기 위한 HEC-RAS를 포함하는 River-HQ 시스템을 개발하였다. 개발된 WIA & River-HQ 시스템은 한국건설기술연구원 하천실험센터 내 직선 수로(실규모 하천) 구간에 대하여 정확성이 검증되었다. 이러한 WIA & River-HQ 시스템은 실제 하천에 대한 적용성과 안정성 검토를 통해 향후 중 소하천의 환경 관리와 홍수예경보 업무 등에 활용될 수 있을 것으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.107-107
• /
• 2019

하천은 과거부터 현재까지 인간의 삶에 있어서 중요한 공간이며 환경적, 생태적으로도 중요한 가치를 지니고 있다. 특히, 하천은 물과 흙으로 이루어져 있기 때문에 수생물이 살아갈 수 있는 독특한 생태 서식처 공간을 제공한다. 국내에서는 1980년대 말부터 하천환경의 개선 및 복원에 대해 관심과 인식을 높이고 공감대를 형성하여 훼손된 하천을 원래 모습으로 되돌리는 사업을 수행하였다. 이러한 하천복원사업이 하천에 서식하는 수생물의 어떠한 영향을 주는지 분석하기 위해 최근에는 다양한 물리서식처 분석이 수행되고 이를 통해 각종 복원계획을 수립하고 있다. 하천복원사업을 통한 생태유량 재산정, 보 철거의 영향, 다양한 복원기법을 통한 수생물에 미치는 영향 파악 등을 들 수 있다. 그러나 이러한 기존 연구들은 하천복원사업으로 인한 수리특성과 수생 서식처의 변화를 살펴보는 간접적인 영향에 대한 내용이었다. 그러나 직접적으로 영향을 미치는 하도의 단면을 재설계하고 다양한 복원기법을 적용하여 그 영향을 파악하는 연구도 수행되어야 할 것으로 판단된다. 본 연구는 수리학적으로 유리한 저수로 물길 조성 및 다양한 저수로 조성기법의 적용을 통해 우점종의 서식처에 미치는 영향에 대해 원주천을 대상으로 물리서식처 분석을 수행하였다. 대상구간은 원주천 중 상류에 위치한 900 m 구간으로, 대상 어종은 원주천의 중 상류에 서식하는 우점종인 참갈겨니를 목표로 하였다. 수리분석과 서식처분석은 각각 River2D 모형과 서식처 적합도 모형을 사용하였다. 서식처 적합도 모형에 사용된 서식처 적합도 곡선은 Gosse (1982)의 방법을 이용하여 구축하였으며, 수심, 유속, 기층을 모두 고려하여 물리 서식처 분석을 수행하였다. 저수로 물길 복원 조성을 위하여 수리학적으로 유리한 저수로 단면으로의 복원 및 거석, 여울/소 구조, 단면의 확폭을 통해 기존 자연형 하천과는 다른 복원을 조성하였다. 수리학적으로 유리한 저수로 물길 복원을 조성한 결과를 이용하여 물리서식처 분석을 수행하였을 때, 기존 자연하천인 현상태 대비 약 37% 가중가용면적이 악화되는 것으로 나타났다. 그러나 수리학적으로 유리한 저수로 단면의 설계 조건에서 거석, 여울/소 구조 및 단면의 확폭의 복원을 수행하였을 때 서식처가 최소 약 3%에서 최대 21%까지 가중가용면적이 향상되었다.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.2
• /
• pp.90-96
• /
• 1997

Until now the research was usually related in the fishing basket for crab charybdis japonica, concentrated one's effort to modification on the construction, shape, number of entrance of fishing basket etc.. But there's not make good used to the basically habit, shelter behavior of crab. etc., and was not fundamentally modified to the ability attracting the crab on net fishing basket. In this paper, first of all investigated to the behavior of crab in water tank and then two types modification fishing baskets could the increasing to ability attracting of crab on fishing basket were designed from the result obtained in this experiment and compared with modificated net fishing basket by Kim.Go(1987.1990) at a field and tank experiment. The results obtained are summarized as follows : 1. Being the fishing baskets had dropped in the tank bottom, the touched rate and reacted rate of crab according the elapsed time agree with to experiment of Kim.Go(1987.1990)in the mainly. however, in case of plate type tangle net, the touched rate of crab increased for a short time and then decreased and the reacted rate increased in a hurry to show a maximum and then was established. 2. The beginning catch time of crab was shortest in the plate type tangle net than the any fishing baskets because it's immediately entangled if the crab was touched only a part of body on net and latest in the net fishing basket. 3. A distance of between the touched rate and the reacted rate curve were the most short, wide in the plate type tangle net. therefore, the ability attracting of crab was excellent than the any fishing baskets and in case of pipe type fishing baskets, between the 150mm and 250mm seemed not difference and showed a tendency to increasing against the net fishing baskets. 4. Pipe type fishing baskets seemed to become a good shelting place for the crab because it showed a tendency to stagnate at the inside in that. 5. The mean catch per pot of crab among the net fishing basket, pipe type fishing baskets, plate type tangle net were highest in the pipe type fishing baskets than the net fishing basket and lowest plate type tangle net. Therefore it showed to difference against the tank experiment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.12C
• /
• pp.1288-1298
• /
• 2002

To implement elliptic curve cryptosystem in GF(2$\^$m/) at high speed, a fast divider is required. Although bit-parallel architecture is well suited for high speed division operations, elliptic curve cryptosystem requires large m(at least 163) to support a sufficient security. In other words, since the bit-parallel architecture has an area complexity of 0(m$\^$m/), it is not suited for this application. In this paper, we propose a new serial-in serial-out systolic array for computing division operations in GF(2$\^$m/) using the standard basis representation. Based on a modified version of tile binary extended greatest common divisor algorithm, we obtain a new data dependence graph and design an efficient bit-serial systolic divider. The proposed divider has 0(m) time complexity and 0(m) area complexity. If input data come in continuously, the proposed divider can produce division results at a rate of one per m clock cycles, after an initial delay of 5m-2 cycles. Analysis shows that the proposed divider provides a significant reduction in both chip area and computational delay time compared to previously proposed systolic dividers with the same I/O format. Since the proposed divider can perform division operations at high speed with the reduced chip area, it is well suited for division circuit of elliptic curve cryptosystem. Furthermore, since the proposed architecture does not restrict the choice of irreducible polynomial, and has a unidirectional data flow and regularity, it provides a high flexibility and scalability with respect to the field size m.

• Korean Journal of Ecology and Environment
• /
• v.46 no.1
• /
• pp.94-102
• /
• 2013

This study was carried out to determine the variation of the water level and crosssection area for investigating changes of stream foreland, and to determine the correlation between the average flow velocity and cross-section area so as to understand the hydrological characteristics of the stream. The slope of the cross-sectional area was changed in water levels of 0.6~1.0 m and 1.8~2.0 m. The first change occurred in the low-water level season, and the second change occurred in the high-water level seasons. It is assumed that the changes occurred due to the geological transfigure. The correlation between the cross-sectional area and the average flow velocity was 0.22~0.86 in the exponential equation and 0.20~0.87 in the linear equation. The low water level had a higher correlation than the high water level, and free weirs in the upper stream showed a very low correlation. Therefore, this study provides novel information for the management of water quality in the riverside, using correlation equations of the water level and flow velocity with the cross section area.

• The Korean Journal of Petroleum Geology
• /
• v.5 no.1_2 s.6
• /
• pp.9-15
• /
• 1997

The study area is located in the Central Bransfield Basin, Antarctica. To analyze the morphology of seafloor, structure of basement, and seismic stratigraphy of the sedimentary layers, we have acquired, processed, and interpreted the multi-channel seismic data. The northwest-southeastern back-arc extension dramatically changes seafloor morphology, volcanic and fault distribution, and basin structure along the spreading ridges. The northern continental shelf shows a narrow, steep topography. In contrast, the continental shelf or slope in the south, which is connected to the Antarctic Peninsula, has a gentle gradient. Volcanic activities resulted in the formation of large volcanos and basement highs near the spreading center, and small-scale volcanic diapirs on the shelf. A very long, continuous normal fault characterizes the northern shelf, whereas several basinward synthetic faults probably detach into the master fault in the south. Four transfer faults, the northwest-southeastern deep-parallel structures, controlled the complex distributions of the volcanos, normal faults, depocenters, and possibly hydrocarbon provinces in the study area. They have also deformed the basement structure and depositional pattern. Even though the Bransfield Basin was believed to be formed in the Late Cenozoic (about 4 Ma), the hydrocarbon potential may be very high due to thick sediment accumulation, high organic contents, high heat flow resulted from the active tectonics, and adequate traps.