• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.141-144
• /
• 2004

기존 광원은 그 배광이 광원을 중심으로 볼 때 사방으로 퍼져 나가며, 이를 이용해 적절한 형태로 바꾸는 것은 주로 반사판의 역할이다. 그러나 LED는 기본적으로 배광이 좁으며, 이를 적절하게 변경시키는 것은 반사판이 아니라 굴절과 확산이 된다. 또한 LED는 그 자체만으로 크기가 작아 점광원으로 볼 수 있지만, LED에서 발광하는 빛은 chip에서 epoxy dome으로 직접 굴절되어 나가는 refracted ray와 reflector cup에 의해 반사되어 다시 epoxy dome에서 굴절되어 나가는 reflected-refracted ray로 이루어지기 때문에 정확히 말하면, 빛은 한 점에서 발광한다고 간주 할 수는 없다. 따라서 본 논문에서는 LED에 대한 최적의 refractor 설계를 위해 점광원으로 간주 할 수 있는 최적의 근사 발광점을 선택하여 refractor를 설계하고자 한다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1149-1153
• /
• 2006

We developed the equipment palpating cell proliferation using a high brightness LED. This equipment was fabricated using a micro-controller and a high brightness LED, and designed to enable us to control light irradiation time, intensity, frequency and so on. Especially, to control the light irradiation frequency, FPGA was used, and to control the change of output value, TLC5941 was used. Control stage is divided into 30 levels by program. Consequently, the current value could be controlled by the change of level in Continue Wave(CW) and Pulse Width Modulation(PWM), and the output of a high brightness LED could be controlled stage by stage.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.8
• /
• pp.390-396
• /
• 2002

This paper Presents to choose number of RGB LED through optical special quality analysis of RGB LED samples and to produce ratio of RGB LED for a stable color variation and white light. Also, it is to design of a simple switching circuit using some resistances and switching transistors that is able to operate each 16 RGB LED stably, and switching control circuit base on a microcontroller that would be suitable for colors variation patterns control more than about 64 patterns and colors variation more than about 100,000 colors using ON/OFF and Duty control.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.1
• /
• pp.68-72
• /
• 2008

AlGaInP high-brightness LEDs(HB-LEDs) have gained importance a variety of application operating in the red, orange, yellow and yellow-green wavelength. The light generated from inside LED chips should be emitted to the air through the surfaces of the chips. However, because of the differences between the semiconductor and air or epoxy's refractive index, some of the light was blocked so that caused lowering external quantum efficiency. In this study, nano-scale roughness on the top-GaP layer of AlGaInP epitaxial wafer was fabricated to improve' the brightness of AlGaInP LEDs. Nano-scale roughness was made by ICP dry etcher. Our AlGaInP LEDs with nano-scale roughness has higher brightness (about 28.5 %) than standard AlGaInP LEDs.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1713_1714
• /
• 2009

본 연구는 LED 광원을 이용한 절전형 라인 조명제어장치의 개발에 관한 것이다. 기본 광원은 5W급 고휘도 LED Lamp를 기본적으로 1~5개의 개별 램프를 제어하며 LED Lamp의 불량상태와 운전상태 감시를 위한 정전류 방식의 구동 기능을 포함하고 여러 단계의 밝기 변화와 절전, 방열을 고려하여 PWM 방식으로 구동 밝기조절 및 점멸 주기 제어기능을 갖는다. 이장치는 도로의 라인조명용 단위장치로 구성될 수 있으며 개별적으로 중앙통제시스템과 통신제어기능을 수행할 수 있게 구성된 시스템이다.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.906-909
• /
• 2004

Status of high intensity LED, one of the recent issue in industry is reviewed. In a system view, various power supply methods for multiple array construction are introduced rather than one for single LED. Custom IC for driving LED and different circuit for applications are also considered.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.2
• /
• pp.7-12
• /
• 2001

In this paper, the optical arrangement of LED lamps was studied using an optical design software for illumination applications. A standard source was constructed, and then simulated its light distribution characteristics of the basic arrangements by shape, by angle, and by displacement. And the color variation circuit was constructed to obtain stabilized light and color output in consideration of the electrical and optical characteristics of high brightness RGB LEDs.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.795-798
• /
• 2011

태양전지를 이용한 LED 가로등 시스템은 태양광을 이용한 신재생에너지를 효율적으로 이용하기 위한 디지털제어 융합기술이다. 고휘도 LED(Light Emitting Diode)를 이용한 조명 시스템은 수명이 길고, 효율이 높고, 디지털 제어가 가능하여 백열등 및 형광등을 대체할 차세대 친환경 조명으로 주목받고 있다. 제안된 시스템은 태양광을 이용한 지능형 LED 가로등 전류 제어 시스템으로서, 배터리 수명을 연장하기 위하여 충전 방식 개선하고, 배터리 충전 상태와 조명시간에 따라 LED 방전 전류를 효율적으로 제어한다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.6
• /
• pp.586-591
• /
• 2010

VLC (Visible Light Communication) is a wireless communication method using light that is visible to the human eye. It has a major advantage that it causes no interference to RF-based devices. This makes wireless communication possible in RF hazardous areas such as nuclear facilities. In order to apply VLC communication in harsh environment of nuclear power plant, the high luminance LEDs, which are key components of the VLC communication, have been gamma-ray irradiated at the dose rate of 4kGy/h during 72 hours up to a total dose of 288 kGy. The radiation induced color-center was formed in the LED housing cap made of transparent plastic or acryl material. The beam degradations of high luminance LEDs by high dose-rate gammaray irradiation are analyzed using color CCD image processing technology.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.261-263
• /
• 2004

This paper studies the lighting pattern control of a high-brightness LED warning light. The driving circuit for the warning light is composed of a full-wave rectified circuit and of a control circuit using a micro-controller (AT89c2051). The micro-controller is programmed in a suitable manner to accomodate a number of variable lighting patterns and to adjust the blinking speed. To reduce the total number of LEDs installed a special consideration is made to the bundled pattern in a lamp module which is lit simultaneously. The resultant LED warning light has merits not only over the conventional incandescent warning light on the energy saving aspect but also over some other LED-type ones in the market.