• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.181-186
• /
• 2005

Gravity method produces subsurface density distribution, which is direct information of soundness of basement. Therefore, microgravity is one of the most effective method for detections of limestone cavities, abandoned mine-shafts and other tunnels, The paper show the effectiveness of microgravity by three different field cases.

• 한국지구과학회:학술대회논문집
• /
• 2005.02a
• /
• pp.147-152
• /
• 2005

인공구조물인 댐체의 밀도 분포를 밝히기 위하여 사력댐에서 고정밀중력탐사를 수행하였다. 얻어지는 중력이상값이 매우 작은 양이므로 정밀한 지형보정을 위하여 삼각요소법을 도입하였다. 역산을 위해서도 댐체의 모양을 그대로 반영할 수 있도록 임의 다면체로 구성하였고, 글로벌 역산인 ASA를 이용하여 해석하였다. 해석결과는 댐의 코어 부분과 모래와 암석으로 채워진 부분이 명확히 구분되었고, 댐의 중앙부에 상대적인 저밀도가 존재하는 수평적인 밀도 변화도 확인할 수 있었다.

• Geophysics and Geophysical Exploration
• /
• v.22 no.2
• /
• pp.80-87
• /
• 2019

In this paper, we propose a method to apply the polynomial fitting for regional-residual separation of microgravity data based on the characteristics of gravity anomaly without a prior information. Since the microgravity survey is usually carried out in small regions, it is common to approximate regional anomaly by the first-order polynomial plane. However, if the regional anomaly patterns are difficult to be approximated to a first-order plane, the complete gravity anomaly is divided into small zones enough to approximate first-order plane by means of Parasnis density estimation method. The regional-residual separation is then applied on the splitted zones individually. When the gravity anomalies can be splitted spatially, we showed that the residual anomalies can be more effectively extracted based on the regional geological structures by regional anomaly separation from each of the divided regions, rather than applying the entire data set at one time.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2008.10a
• /
• pp.167-172
• /
• 2008

A microgravity survey was applied for detecting and mapping karstic cavities over limestone area at Gaeun. The gravity data were collected at about 1, 100 stations by 4 m interval. The density distribution beneath the profiles was drawn by two dimensional inversion based on the minimum support stabilizing functional, which generated better focused images of density discontinuities. We also imaged three dimensional density distribution by growing body inversion. The density image showed that the cavities were dissolved, enlarged and connected into a cavity network system.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.251-254
• /
• 2005

Microgravity survey was carried out in order to detect an abandoned mineshaft. We tested the feasibility of cavity detection by means of numerical modeling and applied microgravity survey to detecting an abandoned mineshaft in the vicinity of Hawson mines, Junnam. The result shows the response of mineshaft where we expected.

• Geophysics and Geophysical Exploration
• /
• v.20 no.4
• /
• pp.226-231
• /
• 2017

Since microgravity survey aims to delineate subsurface density structures in small scale, it requires inversion method, which is able to resolve small scale structures. It can be achieved by adopting a stabilizing functional which separates density boundary distinctly, which is different concept from general inversion routines. We composed Matlab-based interactive two-dimensional microgravity data inversion package containing several kinds of inversion routines with different stabilizing functional, for handling various geologic conditions and survey purposes. Different kinds of inversion routines in the package were verified and examined with representative synthetic data sets generated by numerical modeling. In addition, we applied the developed package to a real microgravity survey data.

• Geophysics and Geophysical Exploration
• /
• v.10 no.4
• /
• pp.383-392
• /
• 2007

Karstic features and mining-related cavities not only lead to severe restrictions in land utilizations, but also constitute serious concern about geohazard and groundwater contamination. A microgravity survey was applied for detecting, mapping and monitoring karstic cavities in the test site at Muan prepared by KIGAM. The gravity data were collected using an AutoGrav CG-3 gravimeter at about 800 stations by 5 m interval along paddy paths. The density distribution beneath the profiles was drawn by two dimensional inversion based on the minimum support stabilizing functional, which generated better focused images of density discontinuities. We also imaged three dimensional density distribution by growing body inversion with solution from Euler deconvolution as a priori information. The density image showed that the cavities were dissolved, enlarged and connected into a cavity network system, which was supported by drill hole logs. A time-lapse microgravity was executed on the road in the test site for monitoring the change of the subsurface density distribution before and after grouting. The data were adjusted for reducing the effects due to the different condition of each survey, and inverted to density distributions. They show the change of density structure during the lapsed time, which implies the effects of grouting. This case history at the Muan test site showed that the microgravity with accuracy and precision of ${\mu}Gal$ is an effective and practical tool for detecting, mapping and monitoring the subsurface cavities.

• Journal of the Korean earth science society
• /
• v.26 no.7
• /
• pp.691-697
• /
• 2005

Recently, the development of accurate gravity-meter and GPS make it possible to obtain high resolution gravity data. Though gravity data interpretation like modeling and inversion has significantly improved, gravity data processing itself has improved very little. Conventional gravity data processing removes gravity effects due to mass and height difference between base and measurement level. But, it would be a biased density model when some or whole part of anomalous bodies exist above the base level. We attempted to make a multiquadric surface of the survey area from topography with DEM (Digital Elevation Map) data. Then we constituted rectangular blocks which reflect real topography of the survey area by the multiquadric surface. Thus, we were able to carry out 3-D inversions which include information of topography. We named this technique, 3-D Gravity Terrain Inversion (3DGTI). The model test showed that the inversion model from 3DGTI made better results than conventional methods. Furthermore, the 3-dimensional model from the 3DGTI method could maintain topography and as a result, it showed more realistic geologic model. This method was also applied on real field data in Masan-Changwon area. Granitic intrusion is an important geologic characteristic in this area. This method showed more critical geological boundaries than other conventional methods. Therefore, we concluded that in the case of various rocks and rugged terrain, this new method will make better model than convention ones.

• Proceedings of the KSRS Conference
• /
• 2006.03a
• /
• pp.109-112
• /
• 2006

2002년 발사 된 GRACE (Gravity Recovery and Climate Experiment)는 미국과 독일 합작으로 개발된 지구중력장 측정 전용 위성으로 동일한 궤도를 비행하는 두 개의 위성 사이 거리 변화를 측정하여 지구 중력장을 추정하는 사업이다. GRACE 위성의 핵심 관측기인 위성간 거리측정기의 원리에 대해 소개하고, 운용 현황 및 성능에 대해 소개하였다. 발사 전 성능 분석 단계에서 고려되지 못했던 거리측정기 오차 요인에 대해 분석하고, 향후 연구 방향을 제시하였다.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.44-49
• /
• 2007

It is difficult to obtain high-resolution images by 3D gravity inversion, because the problem is extremely underdetermined - there are too many model parameters. In order to reduce the number of model parameters we propose a 3D gravity inversion scheme utilising Euler deconvolution as a priori information. The essential point of this scheme is the reduction of the nonuniqueness of solutions by restricting the inversion space with the help of Euler deconvolution. We carry out a systematic exploration of the growing body process, but only in the restricted space within a certain radius of the Euler solutions. We have tested our method with synthetic gravity data, and also applied it to a real dataset, to delineate underground cavities in a limestone area. We found that we obtained a more reasonable subsurface density image by means of this combination between the Euler solution and the inversion process.