• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.5
• /
• pp.623-628
• /
• 2007

The accurate peak response estimation of a seismically excited structure with frictional damping system(FDS) is very difficult since the structure with FDS shows nonlinear behavior dependent on the structural period, loading characteristics, and relative magnitude between the frictional force and the excitation load. Previous studies have estimated that by replacing a nonlinear system with an equivalent linear one or by employing the response spectrum obtained based on nonlinear time history and statistical analysis. In the case that an earthquake load is defined with probabilistic characteristics, the corresponding response of the structure with FDS has probabilistic distribution. In this study, nonlinear time history analyses were performed for the structure with FDS subjected to artificial earthquake loads generated using Kanai-Tajimi filter. An equation for the probability density function (PDF) of the displacement response is proposed by adapting the PDF of the normal distribution. Finally, coefficients of the proposed PDF are obtained by regression analysis of the statistical distribution of the time history responses. Finally the correlation between PDFs and statistical response distribution is presented.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.11 no.6
• /
• pp.53-61
• /
• 2007

This study investigates the effect of site class, post-yield stiffness ratio, damping ratio, yield-strength reduction factor, and natural period on inelastic displacement ratio of bilinear SDF systems located at the sites classified as NEHRP site class B,C,D. The previous studies developed inelastic displacement ratio using equal displacement rule in the intermediate and long period range. But, this approximation overestimates the inelastic displacement ratio. Furthermore, inelastic displacement ratio has not been developed for the systems having a damping ratio less than 5%. This study conducts nonlinear regression analysis for proposing equations for calculating median and deviation of the inelastic displacement ratio of the bilinear SDOF system having damping ratios ranging from 0 to 20%. Using median and deviation of the inelastic displacement ratio, probabilistic inelastic displacement ratio is estimated, which can be used for performance-based seismic evaluation.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.2
• /
• pp.28-36
• /
• 1993

임의의 형상을 갖는 진동체에 의한 방사 음장해석은 경계요소법에 의하여 이미 많은 해석이 시도되었다. 그러나, 진동체의 형상이 매우 복잡한 경우에는 겉표면의 요소수가 크게 증가할 뿐만 아니라 각 요소에서의 경계조건을 모두 알아내어야 하므로, 저주파에 국한된 해석일지라도 엄청난 시간과 노력이 필요하게 된다. 이러한 어려움을 극복하기 위하여 경계요소법을 사용하되, 복잡한 형상의 진동체를 둘러싸는 가상적인 표면을 매우 간단하게 설정한 후 그 표면상의 경계조건인 음압을 측정한다. 임의의 형상에 대한 파수 영역에서의 감쇠파의여파작업을 위하여 특이값 분리를 사용하였다. 특이값 분리에 의하여 음압분포를 측정위치에서 설정된 일반 좌표계에서의 고유모드로 분해한다. 각 고유모드의 원거리 음장의 기여도에 해당하는 각 특이벡터에 대한 특이값의 크기를 비교하여, 유한개의 고유모드만을 포함시킴으로써 원거리 음장을 예측한다. 몇 개의 예제를 통하여 해석적 방법의 기존의 경계요소법에 의한 결과를 본 연구 방법의 결과와 비교하여 잘 일치함을 확인하였다.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.23-32
• /
• 1987

기계,구조물의 신뢰성을 향상시키는 입장에서, 최근에 특히 진동문제가 크로즈업되고 있다. 이것 은 기계, 구조물이 고속화, 대형화, 대용량화함에 따라 종래의 기술만으로는 통용이 되지않기 때 문이라고 생각한다. 이러한 이유로 기계, 구조물의 동력학적 검토를 위해 수치해석기술과 실험해 석기술이 근년에 대단히 비약적으로 발전하고 있다. 이러한 해석기술의 진보를 뒷받침하는 것은 근년의 계산기 및 그 이용기술이다. 즉, 수치해석분야에서 Cray RAN을 시초로 하는 각종전자계 측기기, 고성능미니컴퓨터와 시계열통계해석기술 및 모우도 해석기술이다. 특히 모우드해석에 관 해서는 근년의 진보가 현저하고, 종래의 간단한 가진실험 데이터로부터의 모우도, 파라미터(고유 치, 고유감쇠비, 고유모우드)의 추출에 그치지 않고, 진동응답예측(simulation)과 유한요소법과의 결합이라고 하는 광범위한 기술내용의 포함하는 중요한 기술이 되고 있다. 여기에서는, 이 모우 드해석 특히 실험적 모우드해석기술을 기계구조물에 어떻게 응용할것인가에 대해서 설명한다.

• The Journal of Engineering Geology
• /
• v.4 no.2
• /
• pp.207-218
• /
• 1994

The natural constants of moving coil type geophone can be determined by free impedance and step force method. The former method was desirable for the measurement of natural frequency($f_o$), inertial mass(m) and damping factor($h_o$), but the latter method for sensitivity(G). In particular, the value by the latter method should be corrected for the noise by the long period movement of measurement device. The results of frequency characteristics from these constants operate the accelerometer and displacement system in the boundary of natural frequency.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.6
• /
• pp.691-697
• /
• 2007

Numerical eigen analysis of beam-like structure can be easily and effectively done by various conventional beam theory-based methods. However, in case of the structures composed of composite-sectioned beams, the application of conventional numerical methods requires one to derive both equivalent material and geometry properties. In the present paper, these equivalent properties are derived by the transformed section method and the test FEM program is coded. The numerical accuracy of the proposed method is verified through the comparison with the ANSYS 3-D model.

• Journal of Convergence for Information Technology
• /
• v.10 no.7
• /
• pp.131-137
• /
• 2020

The characteristics of forced vibration with excited sinusoidal force was introduced. Also, numerical analyses and FRF in frequency domain were performed in detail. In this regard, the responses of displacement, velocity and acceleration were investigated in a forced vibration model. The FRF characteristics in real and imaginary part around natural frequency are also discussed. This response approach of forced vibration in time domain is used for the identification and monitoring of sinusoidal forced vibration. For acquiring a displacement, velocity and acceleration, a numerical technique of Runge-Kutta-Gill method was performed. For the FRF(frequency response function), These responses are used. Also, the FRF can represent the intrinsic characteristics of the forced vibration. These performed results and analysis are successful in each damped condition for the forced vibration model. After numerical analysis of the different mass, damping and stiffness, the forced vibration response characteristics with sinusoidal force was discriminated considering its amplitude and frequency simultaneously.

• Journal of Convergence for Information Technology
• /
• v.11 no.9
• /
• pp.130-137
• /
• 2021

The characteristics of forced vibration by an external excitation force having a frequency were analyzed according to the amplitude and frequency of the excitation force. To obtain displacement, velocity, and acceleration, numerical analysis was performed to obtain the frequency response, and in particular, each FRF(Frequency Response Function) was analyzed to reveal the location of the system natural frequency and excitation frequency in the frequency domain. In the vibration model caused by external excitation, the natural frequency and distribution of the surrounding excitation mode in displacement, velocity and acceleration FRF. The FRF was also shown in the power spectrum and FRF of real and imaginary parts. The external excitation force was approximated with the excitation force of a sine wave by giving the amplitude and frequency, the mode generated by this excitation force could be distinguished. After numerical analysis by changing the equivalent mass, damping and stiffness, the forced vibration response characteristics by external excitation force were systematically analyzed.

• Journal of Convergence for Information Technology
• /
• v.12 no.3
• /
• pp.151-157
• /
• 2022

The purpose of this study was to investigate the frequency characteristics of forced vibration considering the vehicle progress. And the vibration characteristics in frequency domain that occur, when vehicle passes the bump, were analyzed. The responses such as displacement, velocity and acceleration were obtained through numerical analysis, and FFT processing was performed to analyze the frequency response function(FRF) characteristics. In particular, the location of vehicle eigenmodes and external excitation modes was clearly shown and analyzed. In the forced vibration model by external force, the behavior of the eigenmode in power spectrum and real and imaginary parts were also analyzed. The mode characteristics were also analyzed in each FRF. It was approximated by assuming total excitation force by considering the exciting frequency using impulse and sine wave forces, which can give the amplitude and frequencies. The response characteristics of forced oscillations having different mass, damping and stiffness have been systematically discussed.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.851-858
• /
• 2023

Purpose: A study was conducted to ensure the structural safety of a raised girder bridge with improved cross-sectional efficiency compared to the conventional PSC girder. For this purpose, the cross-sectional specifications such as girder length, height, and width were determined, the arrangement of the tendons was designed, and the practical performance of the raised girder under static and dynamic loads was verified. Method: The static performance experiment examined the serviceability limit state by measuring behavioral responses such as deflection and cracking to primary and secondary static loads. In addition, the dynamic load loading experiment measured the acceleration and displacement behavior response over time to calculate the natural frequency and damping ratio to examine the usability limit state. Result: As a result of the static performance test, the deflection value based on the maximum applied load showed stable behavior, and the crack width measured at the maximum applied load level was very small, satisfying the serviceability limit state. In addition, a natural frequency exceeding the natural frequency calculated during the design of the dynamic loading experiment was found, and a damping ratio that satisfies the current regulations was found to be secured.