• Journal of Information Management
• /
• v.23 no.1
• /
• pp.1-21
• /
• 1992

The importance of factual database is becoming larger and larger as the application of computer in design and processing is increasing. To follow up and support this demand and tendency, construction of factual database is necessary. The goal of this research project is to construct a factual database about the creep properties of high temperature materials. A factual database on the creep properties of 25 kinds of high temperature materials was constructed. Domestically produced data which were appeared in journals, theses, reports, etc., were collected and used as a input data source. Evaluation on these collected data will be done during the 2nd year of this project. In addition to this database construction, an experimental facility to produce creep crack propagation data was set up.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.5 s.176
• /
• pp.1146-1154
• /
• 2000

Fatigue strength of NiAl and Ni$_3$Al particulate reinforced aluminum alloy composites fabricated by the diecasting method was examined at room and elevated temperatures. The results were compared wit h that of SiC particulate reinforced one. The particulate reinforced composites showed some improvement in the static and fatigue strength at elevated temperatures when compared with that of Al alloy. The composites reinforced by intermetallic compound particles showed good fatigue strengths at elevated temperatures especially $Ni_3AI_{p}/Al$ alloy composite showed good fatigue limit up to high temperature of 30$0^{\circ}C$. Adopting intermetallic compound particle as a reinforcement phase, it will be possible to develop MMC representing better fatigue property at elevated temperature.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.116-117
• /
• 2019

3D printing technology can be applied to various industries, and is trapped by major technologies that change existing manufacturing processes. 3D printing materials must satisfy designability, economy and productivity, and building materials are required to have strength and economy secured technology. 3D printing technology of construction field can be divided into structural materials and internal and external materials, and is mainly done by extruding and adapting. Particularly when it is applied as an exterior materials, it is mainly applied to an unstructured exterior materials and high accuracy is required. The exterior materials can be used as a cement composite materials, it is suitable also for a lamination type, and the role of a cement base composite material is important. In this research, we developed a cementitious base binder applicable as a 3D printing exterior materials, confirmed high temperature strength characteristics for application as an exterior materials of buildings and confirmed its possibility.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.11a
• /
• pp.113-114
• /
• 2014

Though polymer cement mortar is widely used to repair or reinforce concrete as it has superior adhesion, dense internal structure, chemical resistance, and workability in comparison to those of general cement mortar, studies on its behaviors in high temperature environment such as fire is urgently required. Accordingly, in this experiment, the degrees of reduction in the compressive strength at different temperatures was grasped applying ISO834 Heating Curve, and the effect of polymer content and type on compressive strength could be determined. As a result of this experiment, it is found that polymer type and content have a big effect on reduction of compressive strength in high temperature range, and not only the dynamic characteristics but also the combustion characteristics in high temperature range are required to be studied considering occurrence of a fire in the future.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.133-134
• /
• 2021

In this study, the effects of aggregates on the properties of concrete as a study to determine the mechanical properties of high-temperature damaged concrete were examined. The samples to be reviewed are cement paste, mortar, and concrete, and the strength characteristics were reviewed after heating the compression strength and tensile strength properties. The increase in magnetic shrinkage at around 100℃ showed a significant drop in strength in mortar, which does not contain aggregates or has a small diameter, and after 300℃, concrete showed a sharp drop in strength due to the hydration and aggregation of cement.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.6
• /
• pp.91-97
• /
• 2016

Evaluation on the test of actual concrete member to confirm the fire resistance of the concrete member using ultra-high strength concrete is required. However, test equipment which has large loading capacity is needed to the actual member experiment. So, many researchers evaluated the fire performance through analytical studies using the material models. This study experimentally evaluated strain properties on ultra-high-strength concrete of 80, 130 and 180 MPa with heating and examined to apply the existing strain model about ultra-high-strength concrete. As a results, constants are drawn by method of least squares applying experimental values and calculated values by the existing strain model, it proposed strain model that can be applied to ultra-high-strength concrete.

• Composites Research
• /
• v.35 no.2
• /
• pp.86-92
• /
• 2022

This study was conducted to determine the effect of molecular formation of adhesive on interface characterization of thermoplastic composites. Carbonfiber/polyetherketoneketone (CF/PEKK) thermoplastic composites were fusion bonded and PEEK, PEI adhesive bonded using a high-temperature oven welding process. In addition, lap shear strength test and fracture surface analysis using a digital optical microscope and a scanning electron microscope (SEM), and Fourier transform infrared spectroscopy (FTIR) were performed. As a result, the adhesive bonding method improved adhesion strength with interphase having increased molecular formation of ether groups, ketone groups, and imide groups which mainly constitutes the CF/PEKK and adhesives. Furthermore, it was found that the use of PEEK containing more ether groups and ketone groups forms a more strongly bonded interphase and enhances the adhesive force of the CF/PEKK composites.

• Resources Recycling
• /
• v.28 no.6
• /
• pp.64-72
• /
• 2019

Fly ash has different chemical composition depending on the type and quality of flaming coal. Fly ash is classified according to carbon content and particle size. Waste glass powder is manufactured by crushing glass. Exterior Insulation Finish System (EIFS) is generally applied by using poly-styrene foam which is economical and has excellent thermal insulation performance. However, poly-styrene foam has excellent insulation performance, but it is vulnerable to fire, which is becoming a serious problem. In this study, using a fly ash and waste glass powder to produce a finishing mortar at high temperatures. Also, High temperature strength and flame retardant properties were tested according to the cover thickness. From the test result, finishing mortar prepared using fly ash and waste glass powder is due to the improved heat resistance by alkali-activated bonding. However, since the strength decreases at high temperatures, it is necessary to select an appropriate mixing proportion.

• 한국연소학회:학술대회논문집
• /
• 1997.06a
• /
• pp.51-60
• /
• 1997

축대칭 곡면벽 제트 버너를 제작하여 화염의 안정화 특성을 실험적으로 연구하였다. 축대칭 곡면벽 제트 유동은 난류 강도의 증가와 더불어 버너 선단 부근에 재순환 영역을 형성하여 화염의 안정화를 촉진시킴으로서 기존의 튜브 버너에 비하여 화염의 안정화 특성이 향상되었다. 시간적으로 화염의 위치가 변동하는 난류 화염에서 화염의 안정화 특성과 밀접한 관계가 있는 OH 라디칼과 온도를 PLIF와 CARS를 각각 적용하여 측정하였다. 고유속으로 연소시키는 경우에 버너 선단에 형성된 재순환 영역에 OH 라디칼이 상당량 분포하고 있었으며 통계적으로 고온을 유지하였다. 이는 버너 선단에 형성되는 재순환 영역에 고온의 기연 가스가 점화원 역할을 하여 화학 반응이 활발하게 일어나고 있음을 의미한다. 이러한 결과로부터 고속의 출구유속에서 화염 안정화 특성은 재순환 영역에 의하여 영향을 받고 있음을 확인하였다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.228-228
• /
• 2003

고강성 탄소섬유는 높은 비강도 및 고 강성 특성 때문에 탄소-탄소 복합재료의 가장 우수한 강화재로 각광을 받고 있다. 이 섬유는 미세 결정립의 높은 이방성을 나타내며, 이러한 높은 흑연화 특성은 기계적, 전기적, 전기적 그리고 화학적 특성 등을 좋게한다. 이러한 모든 방면에서의 우수한 특성 때문에 항공우주 재료분야에 의심 없이 가장 우수한 재료로 고려되고 있다. 이렇게 가벼우면서 고온강도가 요구되는 재료로써 탄소재료가 이용되면서 rocket의 nozzle이나 nosecone으로의 응용에는 고온 산화가 중요한 연구주제로 대두되어 왔다. 탄소재료의 산화반응은 결정구조 인자 및 그 배열에 가장 큰 영향을 받는다고 알려져 있는데, 출발원료 및 제조 조건에 따라 그 구조 및 배열이 현격하게 달라진다. 탄소재료의 구조 해석은 주로 TEM과 XRD를 이용해 왔다. 많은 연구자들은 오래 전부터 탄소재료 연구에 TEM에서 얻은 상이 불확실하고 문제가 있다고 보고하였고, 최근 TEM 장치의 발달과 더불어 실제 구조를 얻기가 가능함을 보여주고 있다 그러나 TEM 시편은 여전히 작고 시편으로부터 얻는 정보는 불과 nm 수준이다. 따라서 일반적으로 TEM으로 얻은 정량적인 정보는 불과 특정한 점에서의 정보이기 때문에 여전히 논란의 소지가 많다. XRD는 탄소재료의 미세구조 해석을 위하여 가장 널리 이용되는 분석기기이다.