• 한국해양공학회지
• /
• 제11권3호
• /
• pp.89-94
• /
• 1997

In the design of high speed fishing vessel, its hull form has to be decided from a view point of resistance and propulsion performance without negelction of seakeeping characteristics. In spite of many efforts, the performance improvement by hull form itself has its limitations, specially for high speed craft. In this paper, the development of performance of resistance and seakeeping improving appendage for high speed planing hull on behalft of the hull form of fishing vessel has been introduced. The developed appendage verified its effectiveness in the full scale test.

• 한국해양공학회지
• /
• 제31권5호
• /
• pp.335-339
• /
• 2017

This study investigated the sea trial performance of a wave piercing high speed planing hull (WPH). The bow shape of the boat is sharp, and it has no chine or spray strip like a normal planing boat. The skeg is attached to the bottom of the boat in the longitudinal direction from the bow to the stern. The speed performance was analyzed as the speed dropped in a wave, and the seakeeping performance was compared with that of a planing boat with a similar velocity coefficient by measuring the vertical acceleration of the bow in the wave. The turning circle was compared with Lewandowski's estimation for a planing boat. As a result of this study, it was confirmed that the velocity drop of the developed WPH was not large in a wave, and the vertical acceleration was greatly reduced compared with that of a normal planing boat. The turning circle was somewhat larger than the estimated results for a planing boat, but the overall tendency was the same.

• 대한조선학회논문집
• /
• 제46권3호
• /
• pp.335-342
• /
• 2009

Motion characteristics of a planing craft are sensitively changed according to its weight and longitudinal center of gravity. In this paper, planing craft model tests were performed in calm water for various test conditions and Froude numbers. Sinkage and trim were measured to analyze the relations between the attitudes of a planing craft and the weight and center of gravity of it. Theoretical formula for the prediction of the attitudes of a prismatic planing hull was modified so that it can be applied to the prediction of the attitudes of a non-prismatic planing hull, and the calculation results by the modified formula were in good agreements with the experimental data.

• 한국해양공학회지
• /
• 제23권4호
• /
• pp.38-46
• /
• 2009

Two sets of numerical simulations were carried out for a planing hull model ship. In the first, the WAVIS 1.4 linear and nonlinear potential solver was utilized with the free support condition, in which the running posture was determined during calculation. The linear and nonlinear potential calculation results showed qualitative agreement in the trim and resistance coefficient with the MOERI towing tank test. However, the nonlinear potential calculation gave better results than the linear method. In the next simulation, Fluent 6.3.26 with a VOF model and the WAVIS 1.4 nonlinear potential solver were used with the given running posture from the measurement carried out in the MOERI towing tank. Fluent with the VOF method had substantially better agreement with model test results than the results from the WAVIS nonlinear potential calculation for the total resistance coefficient, and for the bow and stern wave patterns, in spite of the much greater computational costs. Both methods can be utilized in planing hull design when their limitations are perceived, and the running posture should be predicted correctly.

• 대한조선학회논문집
• /
• 제51권5호
• /
• pp.369-379
• /
• 2014

Planing hull forms have significant influences on those hydrodynamic performances in calm water and in waves. Therefore, the hydrodynamic performance of a planing vessel should be predicted by model tests or theoretical calculations, and be confirmed whether it shows the performance requirements at the design stage. In this study, four planing hull forms are designed with the goal of the improvement of resistance and seakeeping performance, and 1/6.5 scale model tests are carried out in Seoul National University towing tank. The effects of design parameters such as length-to-beam ratio, deadrise angle and forebody shape on the hydrodynamic performance are investigated, based on model test results. Running attitude and resistance of model ships in calm water are also estimated by empirical formulae proposed by Savitsky (1964; 2007; 2012), and compared with the model test results. It is shown that calm water performance of non-prismatic planing hulls can be predicted well by Savitsky (2012)'s formula which improves the original Savitsky(1964/2007)'s formula by taking into account the variations of deadrise angles, and the actual angles between the hull bottom and the free surface.

• 대한조선학회논문집
• /
• 제56권1호
• /
• pp.23-33
• /
• 2019

Unmanned Surface Vehicle (USV) is being developed to do maritime survey and maritime surveillance at Korea Research Institute of Ships & Ocean engineering (KRISO). The goal is that USV should be operated at the maximum speed of 45 knots and it should be operated at sea state 4. Therefore the planing hull of USV should be excellent in resistance performance and manoeuvring performance. It is needed to check its performance using Experimental Fluid Dynamics (EFD), Computational Fluid Dynamics (CFD) or analytic method before designing the hull. In this study, resistance performance was analyzed by EFD and CFD. EFD with heave and pitch was performed at high speed towing system in Seoul National University. CFD was performed using SNUFOAM based on openFOAM with dynamic mesh to calculate running attitudes. The results of CFD were compared with EFD results. The results of CFD were resistance, running attitudes and wave height. The flow distribution and pressure distribution were also analyzed. The results of numerical resistance was under estimated than EFD. Even though the results of CFD have a slight limitation, it can be successfully used to estimate the resistance performance of planing hull. In addition it can be used as a supplement for EFD results.

• 수산해양기술연구
• /
• 제38권4호
• /
• pp.289-292
• /
• 2002

TPI는 고속 활주선의 소음, 진동, 트림 및 핏칭운동을 감소시킨 것으로 실선 시운전에서 증명되었다. 또한 모형시험에서 저항성능도 미소하게나마 개선시킨 것으로 입증되었다

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.179-186
• /
• 2007

경부고속열차(KTX) 제어시스템은 차량컴퓨터(OBCS), 차상신호제어장치(ATC), 견인제동추진장치(MBU), 운전자고장안내지원장치(TECA), 유무선통신장치(MDT), 보조전원제어장치(ABU), 공조장치(HVAC), 객차활주제어장치(TRAE), 도착지표시장치(PID), 객실안전및객실편의설비동작표시장치(FDTR) 등이 차량컴퓨터를 마스터로 그 외 하부제어장치들은 슬레이브로 다양한 시리얼라인을 매체로 상호 제어한다. 이런 다양한 시리얼링크라인의 물리적 구조와 상호 데이터 전송구조를 분석하기 위해, 시리얼라인 분석기를 다양한 방법으로 사용한다. 시리얼라인 분석기를 사용하기 위해서는 사전에 고속열차에 대한 전문 기술과 장비사용에 대한 경험이 필요하다. 공간과 환경이 어려운 여건에서, 고속열차정비에 근무하면서, 하부장치 시리얼라인 데이터 수집과정에서 얻은 물리적 접속방법과 통신데이타 분석에 대한 기본 구조를 제시하여, 관련 업무에 종사하는 분에게 도움이 되고자 한다. 또 한 향후 독자적으로 개발 된 고속열차 시운전과정에서 필요한 고속열차 진단업무에 도움이 되고자 한다.

• 기술사
• /
• 제16권2호
• /
• pp.1-11
• /
• 1983

The resistance property of a high speed passenger craft (: "DOL-PIN HO" designed by the author in 1972) is investigated as follows; -. The Resistance property of the craft is determined by savitsky′s method and blount-Fox′s method. The theoretical results are also compared with the full scale data. The comparison reveals that the result when using blount/fox′s method are in much closer agreement with the full scale data than savitsky′s. -. The effects of ship speed on the positions of the center of pressure and of the longitudinal center of gravity (L.C.G.) are investigated. The investigation shows that the position of L.C.G. of the craft is almost constant although the ship speed is changed. -. The effect of transom flap on the Resistance property of the craft is studied using savitsky/brown′s method. From the study it is found that the resistance of the craft is decreased and hence speed gain (about 3% of the service speed) can be obtained, when using transom flap for the craft.

• 대한조선학회논문집
• /
• 제55권5호
• /
• pp.401-414
• /
• 2018

Planing hull type ships are often equipped with interceptor or trim tab to improve the excessive trim angle which leads to poor resistance and sea keeping performances. The purpose of this study is to design a controller to control the attitude of the ship by controllable stern interceptor and validate the effectiveness of the attitude control by the towing tank test. Embedded controller, servo motor and controllable stern interceptor system were equipped with planing hull type model ship. Prior to designing the control algorithm, a model test was performed to identify the system dynamic model of the planing hull type ship including the stern interceptor. The matrix components of model were optimized by Genetic Algorithm. Using the identified model, PID controller which is a classical controller and sliding mode controller which is a nonlinear robust controller were designed. Gain tuning of the controllers and running simulation was conducted before the towing tank test. Inserting the designed control algorithm into the embedded controller of the model ship, the effectiveness of the active control of the stern interceptor was validated by towing tank test. In still water test with small disturbance, the sliding mode controller showed better performance of canceling the disturbance and the steady-state control performance than the PID controller.