• The korean journal of orthodontics
• /
• v.31 no.2 s.85
• /
• pp.159-172
• /
• 2001

Three dimensional analysis of malocclusion and craniofacial deformation is essential for the successful orthodontic treatment. But the orthodontists are not familiar with diagnosis and treatment plane based on lateral cephalometric analysis. Since orthodontists do not posses a sufficient knowledge in standard value of posteroanterior cephalometric anaysis and of clinical importance for transverse jaw growth. In this study male(n=130) and female(n=171) aged from 6 to 16 and diagnosed as Class I malocclusion were selected to analysis width of cranium, maxilla and mandible on the posteroanterior cephalogram. The changes as a function of chronologic age and cervical vertebrae maturity index(CVXI) were examined. The Proper regression model was selected by sex with polynominal regression models and method of variable selection. Mean of each measurements and 70% confidence interval of individual measurement according to age was assesed and a graphs were made. Results are as follows :1. All the measurements for the width are gradually incresed as increase in chronologic age and CVMI. From the total amount of change between age 6 and 16, there is a tendency that mandibular width is broader than maxillary width and the width of male is broader than female. 2. There is no statistically significant sexual difference in Mx-Mn difference, Mx-Mn width differential, Mx/Mn ratio according to age and CVMI. 3. Mean of each measurement and 70% confidence interval of individual measurement according to age and sex were assessed and graphs were made for maxillary width, mandibular width, Mx-Mn difference, Mx/Mn ratio. 4. The width of maxilla and mandible in Korean children are broader than Western children during growth period.

• Analytical Science and Technology
• /
• v.28 no.6
• /
• pp.377-384
• /
• 2015

A survey of the artificial radionuclides in rivers and lakes was conducted to investigate their levels in surface water. Water samples were collected at 60 points and analyzed by gamma-ray spectrometry with a measurement time of 10,000 seconds for ¹³⁴Cs, ¹³⁷Cs, and ¹³¹I. The obained values were lower than MDA for all points, except one point for ¹³¹I that was 0.533±0.058 Bq/L. ¹³¹I is known as a radioactive material that occurs frequently in sewage treatment plants. Because it is often used for medical treatments and subject to spreading into the environment due to the excretion from the patients. For the point where ¹³¹I was detected, we conducted additional investigation on the upstream river point and the effluent points of nearby sewage treatment plant to find the source of ¹³¹I. ¹³¹I was not detected at the upstream points of one of the upstream sewage treatment plants but found at the downstream points with the level being 0.257±0.034 to 0.799±0.051 Bq/L, proving the sewage treatment plant was the ¹³¹Isource.

• Korean Journal of Clinical Pharmacy
• /
• v.16 no.2
• /
• pp.86-91
• /
• 2006

There are 3 different hypotheses on how statins may affect bones, through promoting bone formation, inhibiting bone resorption or through anti-inflammatory effect. In the 3 cross-sectional studies above, one showed increase BMD at hip and spine, one showed increase BMD only at mid-forearm and one showed that the risk reduction in fractures is not explained by the changes in BMD however, all 3 studies showed a decrease in risk of fracture associated with statins. In the 2 prospective cohort studies, one showed the use of statins was not associated with BMD at any skeletal site or decreasing the risk of fracture, and the other showed statins except pravastatin decreased in risk of vertebrate fracture but not affecting lumbar spine BMD. All of case-control studies indicated reduction in fracture risk but did not provide any data regarding BMD. 2 of the randomized, controlled studies showed no significant reduction in fracture risk as well as statins' effects on BMD. Finally, one longitudinal study showed statin use reduced fracture risk and increased BMD. Among the conflicting results shown above, even when statin use was shown to increase BMD, it does not seem to account for the reduction in fracture risk. There may be different ways that statins affect bone other than those hypotheses proposed above. Many studies seem to agree that pravastatin does not have any effect on bone. Some studies suggested that the reason statins did not achieve clinically significant increases in BMD in some studies, is due to the low affinity of statins on bone; statins are designed to act in the liver therefore their effective concentration in extrahepatic tissue is low. The limitations to those studies discussed above. Many studies did not account for the change of lifestyle while subjects' were on statins. Increases in weight bearing exercise and changes in diet might affect BMD and thus reduce risk of fractures. Mental alertness and vision acuity might prevent falls from occurring; many statin-users in the studies were young so the risk of fractures from falls would be decreased. Almost all of the studies failed exclude patients with neurological problems. During study periods, many subjects may have been started on drugs for diseases that usually occur with aging which could cause drowsiness and lead to falls. The sample sizes used in some of the trials were small and the duration of treatment and follow up might not have been long enough to see clinically relevant results.

• Journal of Technology Innovation
• /
• v.19 no.1
• /
• pp.111-144
• /
• 2011

This study is to confirm the core factors of innovative capabilities and technological entrepreneurship affecting the performance of technology management and business management of small and medium-sized enterprises (SMEs). Through the consideration about the complex natures of technological innovation affecting by multidimensional factors, this study designs the research model that innovative capabilities, the performances of technology and business management are arranged in accordance with the innovation process; input-output-outcome. To meet this research purpose, the hypothesis are set up based on the previous research studies and the research samples are selected from members of the Innovative Business (INNO-BIZ) Association, located in Seoul and Geyonggi province. As a result of regression analysis to the responses gathered from 360 firms, the performance of business management is influenced positively by the technology superiority, market growth and business profitability which are the dominant factors of performance of technology management. In addition, three sub-variables of innovative capabilities such as R&D, strategic planning and learning capability, have positive effects on both the managerial performances. Innovativeness and progressiveness of technological entrepreneurship affect both the performances positively. Moreover, the co-relation between technological entrepreneurship of an innovation leader and innovative capabilities of organizational members are identified. Lastly, technological entrepreneurship has the mediating effect on the path of leading innovative capabilities to the managerial performances. In conclusion, the research results imply that technological innovation-type firms should periodically evaluate the performance of technology management which are the output of technological innovations and the reinvestment for ultimate business success. And improving and developing innovative capabilities and technological entrepreneurship is required to continuously and consistently investing and supporting resources on technological innovations at the firm-and government-level. It is considered that these are the crucial methods for securing the technologically competitive advantage of SMEs with less resources and narrow innovation range.

• Journal of Chest Surgery
• /
• v.38 no.10 s.255
• /
• pp.661-668
• /
• 2005

Background: We have hypothesized that, if a low resistant gravity-flow membrane oxygenator is used, then the twin blood sacs of TPLS can be located at downstream of the membrane oxyenator, which may double the pulse rate at a given pump rate and increase the pump output. The purpose of this study was to determine the optimal configuration for the ECLS circuits by using the concept of pulse energy and pump output. Material and Method: Animals were randomly assigned to 2 groups in a total cardiopulmonary bypass model. In the serial group, a conventional membrane oxygenator was located between the twin blood sacs. In the parallel group, the twin blood sacs were placed downstream of the gravity-flow membrane oxygenator. Energy equivalent pressure (EEP) and pump output were collected at pump-setting rates of 30, 40, and 50 BPM. Result: At the given pump-setting rate, the pulse rate was doubled in the parallel group. Percent changes of mean arterial pressure to EEP were $13.0\pm1.7,\; 12.0\pm1.9\;and\;7.6\pm0.9\%$ in the parallel group, and $22.5\pm2.4,\; 23.2\pm1.9,\;and\;21.8\pm1.4\%$ in the serial group at 30, 40, and 50 BPM of pump-setting rates. Pump output was higher in the parallel circuit at 40 and 50 BPM of pump-setting rates $(3.1\pm0.2,\;3.7\pm0.2L/min\;vs.\;2.2\pm0.1\;and\;2.5\pm0.1L/min,\;respectively,\;p=0.01)$. Conclusion: Either parallel or serial circuit configuration of the ECLS generates effective pulsatility. As for the pump out, the parallel circuit configuration provides higher flow than the serial circuit configuration.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2007.05a
• /
• pp.300-320
• /
• 2007

정보기술의 발달과 함께 소프트웨어 제품은 모든 산업에 필수요소가 되었고, 품질과 평가에 대한 관심도 점차 증가되고 있다. 하지만 일부 산업에서는 소프트웨어 품질 평가에 대한 사용자들의 만병 통치적 기대, 품질 표준의 부족, 측정을 위한 양질의 데이터 부족, 소프트웨어 분석과 디자인에 대한 공학적 한계로 소프트웨어 품질 평가에 대해 많은 문제점이 지적되고 있다. 국내에서도 의료산업 관련 정보시스템의 오류 및 사용자들의 운영 미숙은 매년 많은 금액의 사회적 비용을 증가시켰고, 병원정보시스템의 품질에 대한 관심을 초래하였다. 특히, 산업적 특성이 강한 병원정보시스템은 성공적 구축을 위해 사용자 중심의 소프트웨어 디자인과 다양한 전문가들의 지식 통합이 필요하며, 정보시스템 품질 측정으로 연구자들과 개발자들의 시스템 설계 혼란을 감소시키는 방법론이 필요하다는 연구들이 등장하고 있다. 대부분의 병원정보시스템이 단편적인 업무처리 위주로 개발 운영되고 있고, 장기적 경영전략이나 임상연구를 위한 분석적 정보처리 기능들은 결여되어 있다. 또한 소프트웨어 재설계나 추가적 개발 에 활용될 수 있는 객관적 품질 기준이 부족하고, 사용자들의 요구사항에 대해 소프트웨어 설계에 있어서 효율적으로 반영되지 못하고 있다. 이에 본 연구는 최근 발표된 병원정보시스템 품질 평가에 대한 연구 경향을 종합하고, 품질 평가에 대 해 효율적으로 활용되고 있는 사용성(Usability)을 기준으로 병원산업의 특수성을 포함한 품질 평가 방법과 품질척도를 제안하고자 한다. 국제표준기구(ISO:International Standards Organization)에서는 품질 특성을 기능성, 신뢰성, 사용성, 효율성, 유지 보수성과 이식성의 특성을 제시하고 있다. 특히 Folmer & Bosch(2004)가 정리한 ISO9126에서는 품질의 특성을 배움의 용이성, 운영의 용이성, 이해성과 매력성으로 분류하였고, ISO9241-11는 효과성, 효율성과 만족성으로 분류하였다. 또한 Shackel(1991)은 배움의 용이성(배움과 시간, 기억력), 효과성(오류, 직무시간), 유연성과 마음가짐으로 분류하고 있다(Shackel, 1991). Nielsen(1997)은 배움의 용이성, 기억의 용이성, 오류, 효율성, 만족성으로 분류하고 있고(Nielsen, 1997), Shneiderman(1998)는 효과성(직무시간, 배움의 시간), 효율성(기억의 지속시간, 오류), 만족도를 품질의 특성으로 분류하였다. 이와 같은 소프트웨어의 품질은 소프트웨어 계획, 개발, 성장과 쇠퇴의 모든 과정에 적용되며, 환경적 변화에 따라 사용자들의 정보욕구를 적절하게 반영하여 만족도를 높이 는 것이라고 요약할 수 있다. 그러나 현재까지 소프트웨어 품질 평가에 대한 연구들 은 보편적인 평가 항목들을 대상으로 측정하여 일반적인 품질기준을 제시하고 있고, 유사한 측정 내용들이 중복되어 있다. 이러한 경향은 산업별 특수성이 강한 소프트웨어에 대해서는 정확한 품질측정이 어려웠고, 품질측정에 대한 신뢰성을 떨어뜨리는 계기가 되었다. 이러한 한계를 극복하고자 나타난 방법론이 최종사용자들의 요구사항을 얼마나 적절하게 시스템에 반영했는지에 대한 사용성(Usability) 측정이다. 사용성에 대한 정의는 사용자들이 실질적으로 일하는 장소에서 직접 사용자들의 시스템 운용실태를 파악하여 문제점을 개선하는 것으로 요약할 수 있다. ISO9124-11에서는 사용성을 "어떤 제품이 구체적인 사용자들에 의해 구체적인 목적을 달성하기 위한 구체적인 사용의 맥락에서 효율성, 효과성을 만족함으로 사용될 수 있는 정도"로 정의하고 있다. 지난 10년간 병원정보시스템 평가에 대한 문헌들을 고찰한 결과 품질 측정의 효과는 정보화에 대한 동기유발과 의료품질을 높이는 게기가 되었으며, 질병에 대한 예방효과도 높은 것으로 조사되었다. 그러나 평가에 대한 인식의 문제, 평가 방법의 신뢰성 부족, 평가 지침과 부분적 평가에 따른 인증의 어려움 평가 결과에 대한 확산과 단편적 연구의 한계 등으로 연구결과에 대한 신뢰도와 활용도는 낮은 것으로 조사되었고, HIS에 대한 연구 빈도와 범위 가 매우 미약하였다. 특히, 품질속성은 같은 용어이지만 연구자에 따라 전혀 다른 측정 내용을 제시하고 있어 효율적인 품질 지표를 제시하는데 많은 혼란을 초래하고 있다. 이러한 품질 평가의 경향은 시스템 설계 및 개발자들에게 필요한 사용자들의 구체적이고 독특한 욕구나 병원정보시스템 환경의 특수성 파악에 한계를 보였으며, 평가 범위도 부분적으로 이루어져 전사적 시스템 설계 및 개발에 중요한 자료를 제공하지 못하고 있다. 이러한 문제점과 한계를 극복하고자 ISO와 같은 품질 표준 속성과 컨텍스트(Context)를 중심으로 사용자에 의한 평가 척도의 설정은 구체적이고 실용적이며 신뢰성 있는 평가 방법이 될 것이다.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.2
• /
• pp.244-251
• /
• 2009

Extraction characteristics of dried jujube and functional properties of corresponding extract were monitored by response surface methodology. Maximum extraction yield of 53.69% was obtained at extraction temperature of $50.35^{\circ}C$, extraction time of 16.69 hr, and ethanol concentration of 72.88%. At extraction temperature, extraction time, and ethanol concentration of $45.80^{\circ}C$, 15.47 hr, and 73.12%, respectively, maximum cyclic adenosine monophosphate content was 8.20 mg/100 g. Maximum total polyphenol content was 18.85 mg/g at extraction temperature, extraction time, and ethanol concentration of $64.91^{\circ}C$, 20.84 hr, and 66.91%, respectively. Maximum total flavonoid content was 0.48 mg/g at extraction temperature, extraction time, and ethanol concentration of $57.36^{\circ}C$, 15.14 hr, and 71.08%, respectively. $IC_{50}$ value of electron donating ability showed maximum level of 32.34 mg/mL at extraction temperature of $48.46^{\circ}C$, extraction time of 19.25 hr, and ethanol concentration of 65.36%. Maximum ascorbic acid equivalent antioxidant capacity was 3.58 mg ascorbic acid equivalent per gram sample at extraction temperature, extraction time, and ethanol concentration of $56.09^{\circ}C$, 21.86 hr, and 65.36%, respectively.

• The Journal of Korean Society for Radiation Therapy
• /
• v.22 no.1
• /
• pp.47-51
• /
• 2010

Purpose: In the treatment of high-energy protons Air gap (the distance between the patient and the exit Beam) Lateral Penumbra of the changes to the increase in the radiation fields can form unnecessary and Increase the maximum dose at the site of treatment and reduced the minimum dose homogeneity of dose distributions can decline. Air gap due to this change in dose distribution compared to investigate studied. Materials and Methods: Received proton therapy at our institution Lung, Liver patients were selected and the size of six other Air gap in Field A and Field B 2, 4, 6, 8, 10 cm Proton external beam planning system by setting up a treatment plan established. Air gap according to the Lateral Penumbra area and DVH (Dose Volume Histogram) to compare the maximum dose and minimum dose of PCTV areas were compared. In addition, the dose homogeneity within PCTV Homogeneity index to know the value and compared. Results: Air gap (2, 4, 6, 8, 10 cm) at each change in field size were analyzed according to the Lateral Penumbra region Field A Change in the Air gap 2~10 cm by 1.36~1.75 cm, the average continuously increased about 28.7% and Field B Change in the Air gap 2~10 cm by 1.36~1.75 cm, the average continuously increased about 31.6%. The result of DVH analysis for relative dose of the maximum dose According to Air gap 2~10 cm is the mean average of 110.3% from 108.1% to a sustained increased by approximately 2.03% and The average relative dose of minimum dose is the mean average of 93.9% percent to 90.8 percent from the continuous decrease of about 3.31 percent. The result of Homogeneity index value to the according to Air gap 2~10 cm is the 2-fold increase from 1.09 to 2.6. Conclusion: In proton therapy case, we can see the increasing of lateral penumbra area when airgap getting increase. And increasing of Dmax and decreasing Dmin in the field are making increase homogeneity index, So we can realize there are not so good homogeneity in the PCTV. Therefore we should try to minimize air gap in proton therapy case.

• Applied Biological Chemistry
• /
• v.48 no.1
• /
• pp.23-33
• /
• 2005

Agricultural sciences field in South Korea has many strong points such as numerous researchers, establishment of research infra-structure, excellence in research competitiveness and high technological level. However, there are also many weaknesses including insufficient leadership at related societies and institutes, deficiency of the next generation research group, and insufficiency in research productivity. There are many opportunities including increasing the importance of the biotechnological industry, activating international cooperation researches, and exploring the multitude of possible research areas to be studied. However, some threats still exist, such as pressure from the government of developed countries to open the agricultural market, the decrease of specialized farms, and intensification for researches to gratify economic and social demands. To encourage research activities in the agricultural sciences field in Korea, the following actions and systems are required: 1) formulation of a mid- and a long-term research master plan, 2) development of a database on the man power in related fields, 3) activation of top-down research topics, and associated increase of individual research grants, 4) development of special national programs for basic researches in agricultural sciences, 5) organization of a committee for policy and planning within the related societies, and 6) system development for the fair evaluation of the research results.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.14 no.3
• /
• pp.2703-2715
• /
• 1972

1. Title of Research Research on the Loss of Irrigation Water Flowing in Earth Channel. 2. Purpose and Importance of Research The purpose of this research is to obtain the accurate loss rated of irrigation water flowing in earth channels so as to give a criterion of designing rational and effective suplpy project of irrigations water. It is the present status that the loss rates of 10 to 20% are obscurely applied without any scientific proof. Therefore, the importance of this research lies in securing loss rates, which are experimentally proves to be suitable for specific local conditions. 3. Content and Scope of Research The selected test reach of the main channel is 1,000m long. Discharges were measured at up and downstream enps by using current meter. The test reach of the lateral channel is 500m long, and parshall flumes were set at both ends to measure inflow and outflow. Finally, for the supply ditch, the test section is 200m long, and sharp-edged rectangular weirs were provided at both ends to measure inflow and outflow. In addition, various factors influence on the loss of irrigation water in channel wer examined. 4. Results of Research and Proposition Results: 1. In the main channel, which is 1,000 M long, and has a slope of 1/3,000 and was constructed by cutting earth, its loss rate is 9.64%. 2. In the lateral, which has a slope of 1/1,500, and is 500m long, and was constructed by cutting, its loss rate is 15.55%. Its average seepage rate is 2.08cm/day. 3. In the supply ditch, which has a slope of 1/300, and is 200m long, and was constructed by filling earth, its loss rate is 12.34%, its average seepage rate being 3.37cm/day. Proposition: As could be seen in the results above-mentioned, it is contradictory to apply a loss rate of 20% for every main channels and 15% for every laterals without variation, as done so for in planning irrigation project. The fact, however, is that loss rates must be different according to localities and characteristics. Due to the fact that this experiment is small in its scope and is nothing but a preliminary one, it is hardly possible to draw decisive conclusions with the results obtained in this research. Loss rates, that are secured through more extensive research, should be used, in order to establish precise irrigation project. Moreover, such researches should be carried out for a number of loclities throughout the nation.