Abstract
Background: We have hypothesized that, if a low resistant gravity-flow membrane oxygenator is used, then the twin blood sacs of TPLS can be located at downstream of the membrane oxyenator, which may double the pulse rate at a given pump rate and increase the pump output. The purpose of this study was to determine the optimal configuration for the ECLS circuits by using the concept of pulse energy and pump output. Material and Method: Animals were randomly assigned to 2 groups in a total cardiopulmonary bypass model. In the serial group, a conventional membrane oxygenator was located between the twin blood sacs. In the parallel group, the twin blood sacs were placed downstream of the gravity-flow membrane oxygenator. Energy equivalent pressure (EEP) and pump output were collected at pump-setting rates of 30, 40, and 50 BPM. Result: At the given pump-setting rate, the pulse rate was doubled in the parallel group. Percent changes of mean arterial pressure to EEP were $13.0\pm1.7,\; 12.0\pm1.9\;and\;7.6\pm0.9\%$ in the parallel group, and $22.5\pm2.4,\; 23.2\pm1.9,\;and\;21.8\pm1.4\%$ in the serial group at 30, 40, and 50 BPM of pump-setting rates. Pump output was higher in the parallel circuit at 40 and 50 BPM of pump-setting rates $(3.1\pm0.2,\;3.7\pm0.2L/min\;vs.\;2.2\pm0.1\;and\;2.5\pm0.1L/min,\;respectively,\;p=0.01)$. Conclusion: Either parallel or serial circuit configuration of the ECLS generates effective pulsatility. As for the pump out, the parallel circuit configuration provides higher flow than the serial circuit configuration.
배경: 체외순환장치 중 막형산화기를 사용하는 인공심폐기나 생명구조장치(Extra-corporeal Life Support System; ECLS)는 혈액이 통과하기 위해 막형산화기 전방에 구동점프가 요구된다. 국내에서 개발된 박동식 생명구조장치(T-PLS)의 경우는 막형산화기가 두 개의 혈액주머니 사이에 위치하여 액츄에이터가 번갈아 까내는 구조로 되어 있다 저자 등은, 만일 저항이 낮은 gravity-flow hollow fiber 막형산화기를 사용한다면 두 개의 혈액주머니와 박동점프를 막형산화기 후방에 설치하는 것이 가능하며, 이러한 구조는 같은 펌프박동 조건에서 2배의 맥박수를 보장하므로 펌프박출량이 증가될 것으로 가정하였다. 본 실험은 한국형 생명구조장치의 회로구성을 최적화하기 위해 계획되었으며, 기존의 막형산화기를 사용한 직렬회로구조와 gravity-flow hollow fiber 막형산화기를 이용한 병렬회로 구조를 박동에너지와 펌프박출량을 이용하여 비교하였다. 대상 및 방법: 실험은 $35\~45kg$의 돼지 12마리에서 심실세동혈 심정지 모델을 만들었으며, T-PLS 회로구성 형태에 따라 두 군으로 나누었다. 직렬군은 두 개의 혈액주머니 중간에 기존 막형산화기를 직렬로 설치하였으며, 병렬군은 gravity-flow hollow fiber막형산화기 후방에 이중구동점프를 병렬로 설치하였다. 펌프박출량은 대동맥 도관에서 직접 혈류를 측정하였고, 등가압력에너지(EEP)는 실시간으로 컴퓨터에 저장된 펌프박출곡선과 하행대동맥 혈압곡선에서 계산하였다. 각 지표는 점프속도 30, 40, 50 BPM에서 매번 측정하였다. 결과: 두 군 모두 박동에너지 측면에서 충분한 박동성을 보여주었다. 점프속도 30, 40, 50 BPM에서 EEP와 평균동맥압의 변화율은 병렬군의 경우 $13.0\pm.7\%,\;12.0\pm1.9\%,\;and\;7.6\pm0.9\%$였으며, 직렬군의 경우 $22.5\pm2.4\%,\;23.2\pm1.9\%,\;and\;21.8\pm1.4\%$였다. 점프박출량의 경우는 점프속도 40, 50 BPM에서 병렬군의 경우 $3.1\pm0.2\;and\;3.7\pm0.2L/min$였으며, 직렬군의 경우 $2.2\pm0.1\;and\;2.5\pm0.1\;L/min$였다(p<0.05). 결론: 혈류 저항이 낮은 gravity-flow 막형산화기를 사용하여 T-PLS 구동점프를 병렬회로로 배치할 경우 효과적인 박동성은 유지하면서, 기존의 막형산화기를 이용한 직렬회로 구조에 비해 점프박출량을 증가시켰다.