• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.6
• /
• pp.1441-1448
• /
• 2013

The propose of this study is to apply establish the foundation for development of elder driver friendly smart cluster. At first, vehicle dashboard trends were analyzed. Secondly, we presents the structure of elder driver friendly smart cluster and explains android based meter cluster. also, we shows the implementation details and experimental result of elder driver friendly smart cluster system. And we presents a summary and conclusions.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10b
• /
• pp.515-520
• /
• 2006

계량기 숫자 인식은 일반적으로 사용되고 있는 아날로그 계량기에 카메라를 부착하여, 검침 시 숫자 계기판 영상을 전송받고, 그 영상으로부터 숫자를 추출 및 인식하는 기술이다. 계량기 숫자 인식에서는 카메라의 설치 상태 및 기타 환경적인 요인들로 인해 숫자 계기판 영상의 일관성 있는 취득이 어렵게 된다. 본 논문에서는 숫자 인식에 악영향을 미치는, 취득 영상의 상태 변화를 보정해주기 위해 잡영 제거 및 윤곽보존 숫자강화를 제안하였다. 잡영 제거를 위해 잡영을 분포 위치에 따라서 세 가지 타입으로 나누었으며, 각 타입별로 잡영 제거를 하였다. 윤곽보존 숫자강화 과정에서는 일반적인 이진화 기법이 가지는 테두리 정보손실을 최소화할 수 있도록, 숫자 테두리의 명도를 보존하면서 숫자 중심부분의 밝기를 강화시켰다. 전처리 전/후의 인식률 비교 실험을 위해 SVM(Support Vector Machines)을 사용하였으며, 학습 데이터 1,409장과 조명 상태를 달리하여 취득한 1,782의 테스트 데이터를 실험 데이터로 사용하였다. 실험 결과, 81.09%라는 성능 향상을 확인하였으며 이는 제안한 전처리 기법이 조명으로 인한 데이터의 상태 변화 문제를 해결해줌으로써 인식 성능 향상에 크게 기여한다는 것을 입증해준다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.233-235
• /
• 2017

Forklift tend to work in place rather than moving due to work environment conditions, so they express only the engine operation time without expressing the moving distance unlike a general car's instrument panel. Therefore, various consumables constituting the forklift have a replacement cycle according to the operation time of the engine. However, it is very difficult to judge the exact replacement cycle only by the engine operation time because the working environment differs for each forklift. In this paper, we propose a system that provides position information and moving distance information of forklift to driver using GPS and IMU sensor. By using this system, it is expected that the forklift status information, which is difficult to judge by the existing instrument panel, is provided as easier information, and economic benefits for forklift management and maintenance are expected.

• Polymer(Korea)
• /
• v.28 no.3
• /
• pp.263-272
• /
• 2004

Using computer simulation, the processibility and properties of the inst겨ment panel of automobile produced by gas injection molding were predicted and evaluated. The P-V-T data of ABS, resin were used in the gas injection molding process in order to estimate the mold filling phenomena. The optimum process conditions were found by adjusting the process parameters including pressure, filling time, the positions of gas channel and runner. The process was simplified and the final instrument panel produced by the gas injection molding was found to have improved dimension stability compared to the one produced by conventional injection molding.

• Archives of design research
• /
• v.12 no.4
• /
• pp.99-108
• /
• 1999

The interior space in a passenger car is consisted with many partial elements, and the instrument panel is the most important part from all of them, which is designate the total image of the interior design and the space variation, drivability and safety of the interior space. ] The instrument panel of a passenger car in the early age had the concept of a wall between the engine room and the passenger cabin on which the instrument for the driver were fitted. Therefore the central mounting of the instruments was the typical feature regardless of the position of a driver seat. As the automobiles became more functional with many equipments, driver oriented instrument panel with energy absorbing materials had been developed, and that was the beginning of the various instrument panel design of these days. The recent instrument panels of passenger car have the tendency of going back to the central instrument mounting as it was at the past on a few cars for the strict safety regulation, a new production technology and for the enhanced drivability. It can be summarized into a few results as these with the analysis of a few recent instrument panels. -minimizing the total volume for the better frontal visibility. -energy absorbing and passive structures for the strict impact regulations. -revival of central instrument mounting for the convenience and safety through minimizing the difference of the focal length of a driver.

• KAPE Magazine
• /
• s.144
• /
• pp.4-5
• /
• 2008

국내산 축산물의 품질에 대한 국민들의 관심이 높아짐에 따라 품질의 정도를 알려주는 "축산물등급판정확인서"(이하 확인서)의 이용이 많아지는 가운데, 미국산 쇠고기 수입재개의 계기로 언론에서도 확인서 위 변조 가능에 대해 관심을 나타내기도 했습니다. 축산물등급판정소는 확인서의 위 변조 유통을 방지하기 위하여 발급 방법을 8월1일부로 개정 시행하였음을 본고에서 알려드리고자 합니다.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.1
• /
• pp.37-45
• /
• 2002

This paper proposes new features for recognizing telltale bulb in a cluster. A typical feature employed in model-based pattern recognition is polygonal approximation points of object. But recognition using these dominant points has many mismatching counts in small model such as telltale bulb. To reduce mismatching counts, proposed features are the circle distribution of object pixel and the ratio of distance from center to boundary in object. This Paper also proposes new decision function using three features. In simulation result, we make a comparison mismatching counts between recognition using dominant points and the new recognition algorithm using three features.

• Proceedings of the ESK Conference
• /
• 1992.10a
• /
• pp.22-25
• /
• 1992

항공산업은 그 특성상 고도의 신뢰성, 안정성이 요구되며, 이를 충족시키기 위하여는 복잡하고 정밀한 구조를 가져야 하므로 다른 산업제품과는 비교가 안될 정도로 그부가가치를 가지고, 타 산업에의 기술 파급 효과가 역시 지대하다. 따라서, 우리나라와 같이 부존자원이 빈약하나 인적 자원이 우수하고 풍부한 나라에서는 자원절약형 산업인 항공산업의 타당성을 검토, 장기적인 육성방안을 수립하여 추진하는 것은 시대적인 요구라 할 수 있다. 이러한 요구에 따라 국방과학연구소에서 공군의 초, 중등훈련기 개발을 추진 중에 있음은 KFP(Korea Fighter Program)사업과 함께 매우 중요한 의미을 갖는다. 이와 같은 시점에서 한국인의 인체특성에 보다 적합한 항공기의 개발은 가장 시급한 과제이며, 이 문제점을 극복하기 위한 기본연구로 조종실 내부설계에 필요한 기준점 및 치수, MIL-SPEC에서 규정하고 있는 기준치를 분석하였으며 실제 항공기(F-5, F-4, F-16)칫수를 측정하여 이를 정면도, 측면도, 평면도로 제시하고, 항공기 제어계통인 조종간, 동력제어기, 러더페달 및 조종석의 실제 측정치와 공군 조종사의 인체측정치를 비교, 평가하였다. 또한 전투기들의 정면 계기판과 좌, 우측의 제어판의 표시장치 및 조작기들을 기능별로 구분하여 각 요소별 제한조건 및 설계지침들을 비교, 분석하였다.

• The KIPS Transactions:PartD
• /
• v.10D no.6
• /
• pp.1041-1048
• /
• 2003

This paper implements a remote image based metering(IBM) system which capture meter image, recognizes number automatically, and send the data wirelessly through PCS data network. We use existing gas/water meter and get NTSC camera image by installing small monochrome CMOS camera on the meter closely. For remote data transfer, we use SMS (short message service) that is provided by commercial PCS network. We developed DVR(digital video recorder) for capturing meter image and character recognition algorithm. In addition, hardware and software for SMS and meter selector were developed.

• Journal of Korea Society of Industrial Information Systems
• /
• v.27 no.6
• /
• pp.59-68
• /
• 2022

We propose the vehicle maintenance support system to alarm consumable replacement reminders to the vehicle owner. Since the delayed replacement of the consumables makes the condition of the vehicle worse, it is crucial to replace consumables in a recommended period. The vehicle maintenance support system alarms the replacement time, which is set by the vehicle owner, based on the mileage of the installed vehicle. It integrates speed information acquired from the Controller Area Network interface for communication between Electronic Control Unit and instrument panel, exposed at the On Board Diagnostics-II port, to calculate the vehicle mileage. By this, there is no additional wiring required for the system. We verify the system has only 0.28% error by comparing the mileage on the system with the instrument cluster on the vehicle. It automatically enters low-power mode consuming 15mW, which is a negligible amount for the typical conditions of the car, to prevent the vehicle battery from discharging when the ignition is off.