• Journal of the Korea Concrete Institute
• /
• v.26 no.1
• /
• pp.23-34
• /
• 2014

This study investigates the relationship between the performance of fresh and hardened Ultra-High Performance Concrete (UHPC) without heat treatment. The performance of fresh UHPC is determined by the slump flow test related to the fluidity of concrete mixtures, and the air content test. The variables of these tests are the water to binder ratio, superplasticizer dosages and volume fractions of steel fiber. Generally, insufficient fluidity and excessive air contents in concrete mixtures lead to the insufficient packing density related to the performance of harden concrete. The performance of hardened UHPC is determined by the compressive and flexural tensile tests. The results of the fresh UHPC tests show that there is the linear correlation between each variable and the slump flow diameter, and that the slump flow diameter is linearly decreased as the air content ratio increase. Using these results, the formula is developed to predict the fresh performance before mixing UHPC. The results of the hardened UHPC tests show that the hardened performance is not influenced by the air content ratio in the range of 3.2 to 4.2 per cent. However, the flexural tensile strength dominantly influenced by the volume fractions of steel fiber.

• Journal of Adhesion and Interface
• /
• v.9 no.3
• /
• pp.20-26
• /
• 2008

It is well know that the structure of shape memory alloy (SMA) can change from martensite austenite by either temperature or stress. Due to their inherent shape recovery properties, SMA fiber can be used such as for stress or cure-monitoring sensor or actuator, during applied stress or temperature. Incomplete superelasticity was observed as the stress hysteresis at stress-strain curve under cyclic loading test and temperature change. Superelasticity behavior was observed for the single-SMA fiber/epoxy composites under cyclic mechanical loading at stress-strain curve. SMA fiber or epoxy embedded SMA fiber composite exhibited the decreased interfacial properties due to the cyclic loading and thus reduced shape memory performance. Rigid epoxy and the changed interfacial adhesion between SMA fiber and epoxy by the surface treatment on SMA fiber exhibited similar incomplete superelastic trend. Epoxy embedded single SMA fiber exhibited the incomplete recovery during cure process by remaining residual heat and thus occurring residual stress in single SMA fiber/epoxy composite.

• Journal of Embryo Transfer
• /
• v.14 no.1
• /
• pp.59-67
• /
• 1999

To make up the medium for quantitative selection of capacitated-sperm through sucrose layer, the effects of BSA, caffeine, heparin and progesterone on sperm swim-up migration and movement were examined. And the results obtained were as follows; 1. BSA of 4mg/ml in bMSS stimulated sperm migration and movement, and attracted capacitated-sperm. 2. Caffeine of 5mM in bMSS containing 4mg/ml BSA stimulated sperm movement and attracted capacitated-sperm. 3. Heparin of 20$\mu\textrm{g}$/ml in bMAA containing both 4mg/ml BSA and 5mM caffeine stimulated movement and capacitation of sperm. 4. Progesterone of 50$\mu\textrm{g}$/ml in bMSS containing all 4mg/ml BSA, 5mM caffeine and 20$\mu\textrm{g}$/ml heparin (BCHP-MSS) attracted capacitated-sperm. 5. Effect of BCHP-MSS on sperm on sperm attraction was not different from effect of 10% follicular fluid solution (FF-MSS) on sperm swim-up separation. In conclusion, bMSS with 4mg/ml BSA, 5mM caffeine, 20$\mu\textrm{g}$/ml heparin and 50$\mu\textrm{g}$/ml progesterone(BCHP-MSS) was a optimal condition for selection of capacitated-sperm through sucrose layer.

• Journal of Power System Engineering
• /
• v.9 no.1
• /
• pp.76-81
• /
• 2005

The effect of micro-pulse plasma nitriding temperature and time on the case thickness, hardness and nitride formation in the surface of Fe-12Cr-22Mn-X alloy with 3% Co and 1% Ti alloys elements investigated. External compound layer and internal diffusion layer was constituted in plasma nitride case of Fe-12Cr-22Mn-X alloys and formed nitride phase such as ${\gamma}'-Fe4N\;and\;{\varepsilon}-Fe2-3N$. Case depth increased with increasing the plasma nitriding temperature and time. Surface hardness of nitrided Fe-12Cr-22Mn-X alloys obtained the above value of Hv 1,600 and case depth obtained the above value of $45{\mu}m$ in Fe-12Cr-22Mn-3Co alloy and $60{\mu}m$ in Fe-12Cr-22Mn-1Ti alloy. Wear-resistance increased with increasing plasma nitriding time and showing the higher value in Fe-12Cr-22Mn-1Ti alloy than Fe-12Cr-22Mn-3Co alloy.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.1
• /
• pp.126-138
• /
• 2017

This study was conducted to investigate the potential of chicken feather (CF), which is a by-product in poultry industry, as a raw material of wood adhesives. For the purpose, adhesive resins were formulated with NaOH- and $H_2SO_4$-hydrolyzed CF as well as crosslinkers, and then the properties and water resistance of the adhesive resins against hot water were measured. CF was made of mainly keratin-type protein, and no or very low content of heavy metals was detected. Hydrolysis rate of CF increased as NaOH concentration in hydrolysis solutions increased. However, in order to minimize the loss of adhesive property of protein itself by the severe hydrolysis of CF and to seek its proper hydrolysis conditions, NaOH concentrations in hydrolysis solution determined to adjust to 5%, 7.5% and 10%. In the NaOH-hydrolyzed CF, $H_2SO_4$-hydrolyzed CF as a hardener and crosslinker were added to formulate CF-based adhesive resins. Solid content of the resins ranged from 28.3% to 44.8% depending on hydrolysis conditions and type of crosslinker. Viscosity of the resins at $25^{\circ}C$ was very high. However, when the temperature of the resins was increased to $50^{\circ}C$, the viscosity decreased greatly and thus the resins could be applied as a sprayable resin. Retention rate measured to evaluate the water resistance of adhesive resins was the highest in the cured resin formulated with 5% NaOH-hydrolyzed CF and 5% $H_2SO_4$-hydrolyzed CF of 10% based on the solid weight as a hardener. Retention rate depending on crosslinkers added into adhesive resins was the highest phenol-formaldehyde (PF) followed by melamine-urea-formaldehyde (MUF) and formalin. The retention rate of CF-based adhesives formulated with 5% NaOH-hydrolyzed CF, PF and $H_2SO_4$-hydrolyzed CF of 10% and over did not differ statistically from that of commercial MUF resins. All of CF-based adhesives formulated with PF as a crosslinker and one with 5% NaOH-hydrolyzed CF of 55%, 5% $H_2SO_4$-hydrolyzed CF of 15%, and MUF of 30% on the basis of solid weight could be substituted for commercial urea-formaldehyde resins, From the results, CF can be used as a raw material of wood adhesives if hydrolyzed in proper conditions.

• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.813-822
• /
• 2002

The purpose of the present study is first to refine the mathematical material models for moisture and temperature distributions in early-age concrete and then to incorporate those models into finite element procedure. The three dimensional finite element program developed in the present study can determine the degree of hydration, temperature and moisture distribution in hardening concrete. It is assumed that temperature and humidity fields are fully uncoupled and only the degree of hydration is coupled with two state variables. Mathematical formulation of degree of hydration Is based on the combination of three rate functions of reaction. The effect of moisture condition as well as temperature on the rate of reaction is considered in the degree of hydration model. In moisture transfer, diffusion coefficient is strongly dependent on the moisture content in pore system. Many existing models describe this phenomenon according to the composition of mixture, especially water to cement ratio, but do not consider the age dependency. Microstructure is changing with the hydration and thus transport coefficients at early ages are significantly higher because the pore structure in the cement matrix is more open. The moisture capacity and sink are derived from age-dependent desorption isotherm. Prediction of a moisture sink due to the hydration process, i.e. self-desiccation, is related to autogenous shrinkage, which may cause early-age cracking in high strength and high performance concrete. The realistic models and finite element program developed in this study provide fairly good results on the temperature and moisture distribution for early-age concrete and correlate very well with actual test data.

• Journal of Embryo Transfer
• /
• v.13 no.3
• /
• pp.291-300
• /
• 1998

This study was carried out to elucidate the effect of progesterone, estradiol 17 beta and cholesterol in follicular fluid on sperm chemotaxis for fertilization. By inducing swim-up migration through sucrose layer into bMSS containing progesterone, estradiol 17 beta and/or cholesterol, their effects on sperm migration and sperm movement were examined. And the results obtained were as follows; 1. Progesterone inhibited sperm migration and movement, but significantly attracted capacitated-sperm at the level of 50 $\mu$g/ml. 2. Estradiol 17 beta inhibited sperm migration and movement, but didn＇t significantly inhibit migration of capacitated-sperm at the level of 10$\mu$g/ml. 3. Cholesterol significantly stimulated sperm migration and movement at the level of 50$\mu$g/ml, but didn＇t attact capacitated-sperm. 4. Progesterone and estradiol 17 beta reduced the effect of cholesterol stimulating sperm migration and movement. But estradiol 17 beta and cholesterol didn＇t reduce the effect of progesterone attracting capacitated-sperm. In conclusion, progesterone of 50$\mu$g/ml in bMSS attracted the capacitated-sperm, cholesterol of 50$\mu$g/ml stimulated sperm migration and movement, but estradiol 17 beta of 10$\mu$g/ml didn＇t affect sperm swim-up separation.

• Korean Journal of Food Science and Technology
• /
• v.40 no.4
• /
• pp.449-454
• /
• 2008

This research examined whether feeding single extracts or complex extracts of Bulnesia sarmienti, together with a high fat diet, could improve serum lipid levels and reduce fat mass in rats. Test groups were fed the extracts, combined with a high fat diet, for eight weeks, and subdivided into seven groups: normal, control, and five treatment groups (BS: B. sarmienti extracts; BS-S: B. sarmienti and Salvia miltiorrhiza Bunge extracts; BS-M: B. sarmienti and Morus alba Linne extracts; BS-SM1: B. sarmienti, Salvia miltiorrhiza Bunge and Morus alba Linne extracts; and BS-SM2: BS-SM1 extracts at a 2-fold concentration). After feeding the test substance for 8 weeks, no significant differences were found for food intake, water intake, change in body weight, or food efficiency ratios (FER) among the groups. However, serum LDL-cholesterol had increased by 14.1% in the BS-S group. When compared with the control group, total cholesterol levels in the BS, BS-S, BS-M, BS-SM1, and BS-SM2 groups were reduced by 36.0, 14.5, 40.4, 17.5, and 22.5%, respectively, with the greatest change shown in the BS-M group. In terms of triglycerides, levels in BS, BS-S, BS-M, BS-SM1, and BS-SM2 had decreased by 41.9, 8.5, 62.3, 17.7, and 14.5%, respectively. Compared to the control group, the BS group showed a significant decrease in fat mass. In conclusion, the BS and BS-M groups showed significant effects with respect to improved serum lipid profiles and body fat mass when they were fed a high fat diet in combination with the respective extracts.

• The Journal of Korean Society for Radiation Therapy
• /
• v.28 no.2
• /
• pp.101-108
• /
• 2016

Purpose : The purpose of this study was to evaluate the Retro recon in SRS planning using BranLAB when stereotactic location error occurs by metal artifact. Materials and Methods : By CT simulator, image were acquired from head phantom(CIRS, PTW, USA). To observe stereotactic location recognizing and beam hardening, CT image were approved by SRS planning system(BrainLAB, Feldkirchen, Germany). In addition, we compared acquisition image(1.25mm slice thickness) and Retro recon image(using for 2.5 mm, 5mm slice thickness). To evaluate these three images quality, the test were performed by AAPM phantom study. In patient, it was verified stereotactic location error. Results : All the location recognizing error did not occur in scanned image of phantom. AAPM phantom scan images all showed the same trend. Contrast resolution and Spatial resolution are under 6.4 mm, 1.0 mm. In case of noise and uniformity, under 11, 5 of HU were measured. In patient, the stereotactic location error was not occurred at reconstructive image. Conclusion : For BrainLAB planning, using Retro recon were corrected stereotactic error at beam hardening. Retro recon may be the preferred modality for radiation treatment planning and approving image quality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.31 no.6
• /
• pp.1134-1141
• /
• 2002

Adhesion of leukocytes to the activated vascular endothelium and their subsequent recruitment/migration into the artery wall are key features in the pathogenesis of atherosclerosis and inflammatory diseases. These features have been mediated by cell adhesion molecules including vascular cell adhesion molecule-1 (VCAM-1) and in tracellular cell adhesion molecule-1 (ICAM-1). This study examined whether flavonoids inhibit the pro-inflammatory cytokine TNF-$\alpha$-induced monocyte adhesion via a modulation of the protein expression of VCAM-1 and ICAM-1 of human umbilical vein endothelial cells (HUVECs). TNF-$\alpha$ markedly increased the adhesion of THP-1 monocytes to endothelial cells and induced the expression of VCAM-1, ICAM-1 and E-selectin proteins in HUVECs. Micromolar concentrations of the flavones luteolin and apigenin and the flavonol quercetin near completely blocked the monocyte adhesion to the activated endothelial cells and the induction of these adhesion molecules. However, equimicromolar catechins of (-)epigallocatechin gallate and (+)catechin, the flavonol myr- icetin and the flavanones of naringin and hesperidin had no effect on TNF-$\alpha$-activated monocyte adhesion. (-)Epigallocatechin gallate, (+) catechin, and naringin did not attenuate the TNF-$\alpha$ induction of these adhesion molecules. Furthermore, culture with luteolin and apigenin strongly blocked the expression of TNF-$\alpha$-induced VCAM-1 mRNA and modestly attenuated ICAM-1 mRNA. Quercetin modestly decreased the TNF-$\alpha$-activated VCAM-1 and ICAM-1 mRNAs. These results demonstrate that flavonoids classified as flavones and flavonols may inhibit monocyte adhesion to the TNF-$\alpha$-activated endothelium, most likely due to a blockade of expression of functional adhesion molecules down-regulated at the transcriptional level, indicating a definite linkage between the chemical structure of flavonoids and the expression of cell adhesion molecules. Furthermore, the antiathero-genic feature of flavonoids appears to be independent of their antioxidant activity.