• Title/Summary/Keyword: 경사방향

Search Result 1,082, Processing Time 0.027 seconds

Analysis of Runoff Characteristics of NPS Pollution in different Slope from Upland field (경사도가 다른 고랭지 밭의 비점오염물질 유출특성 분석)

  • Lee, Su-In;Shin, Jae-Young;Shin, Min-Hwan;Choi, Yong-Hun;Choi, Joong-Dae
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2012.05a
    • /
    • pp.906-906
    • /
    • 2012
  • 밭에서 발생하는 비점오염물질은 강우량, 강우강도, 경사도, 토양, 시비량 등에 영향을 받는다. 따라서 효율적인 비점오염물질의 관리를 위해서는 영향인자에 대한 자세한 분석이 선행되어야 한다. 이에 본 연구에서는 강원도 평창군 대관령면의 경사도가 다른 고랭지 밭 두 지점을 선정하여 비점오염물질의 유출특성을 파악하고, 향후 비점오염원의 효율적인 관리를 위한 기초자료를 제공하고자 하였다. 연구기간은 2011년 4월부터 11월까지 유출이 발생한 8회의 강우사상에 대해 모니터링을 수행하였다. 연구결과 경사도 4.9% 밭에서의 유출율은 0.05~0.48이었으며, 16.8% 경사에서는 0.31~0.57로 나타났다. 유량과 채취된 수질 시료를 이용해 EMC를 산정한 결과 경사도 4.9%인 밭에서는 SS 762.1~2422.7 mg/L $BOD_5$ 4.5~14.9 mg/L, $COD_{Cr}$ 16.1~62.0 mg/L, $COD_{Mn}$ 7.5~43.2 mg/L, TN 9.602~21.021 mg/L, TP 2.544~6.763 mg/L의 범위로 나타났다. 반면 16.8%의 경사밭에서는 SS 116.0~2015.5 mg/L $BOD_5$ 6.0~9.5 mg/L, $COD_{Cr}$ 21.9~75.4 mg/L, $COD_{Mn}$ 4.3~33.1 mg/L, TN 10.937~46.295mg/L, TP 2.611~11.197 mg/L의 범위로 나타났다. 두 지점의 유출률과 EMC를 비교한 결과, 경사가 증가함에 따라 유출율이 증가하는 것으로 나타났으며, SS를 제외한 모든 수질항목의 EMC가 증가한 것으로 나타났다. SS의 경우 경사가 큰 고랭지 밭에서 낮은 값을 보였는데, 이는 16.8%의 경사밭에서 등고선 방향으로 경운을 하여 흙 입자의 유실이 적었기 때문인 것으로 판단된다. 본 연구의 결과와 같이 밭에서 발생하는 비점오염물질의 유출특성은 강우조건(강우강도, 선행무강우일수), 시비량, 토양, 지표의 피복상태 등에 따라 다르기 때문에 장기적인 모니터링을 통해 기초자료를 축적하는 것이 중요하다고 판단된다.

  • PDF

Geological Structure of Precambrian to Paleozoic metasedimentary rocks in the Janggunbng area, Korea -Crustal evolution and environmental geology of the central part of the North Sobaegsan Massif, Korea- (장군봉지역 선캠브리아대-고생대 변성퇴적암류의 지질구조 -북부 소백산육괴의 중앙부지역의 지각진화와 환경지질)

  • Gang, Ji Hun;Kim, Hyeong Sik;O, Se Bong
    • The Journal of the Petrological Society of Korea
    • /
    • v.6 no.3
    • /
    • pp.244-244
    • /
    • 1997
  • The Janggunbong area(this study area) at the central-south part in the North Sobaegsan Massif, Korea, consists mainly of Precambrian(Wonnam and Yulri Formations)-Paleozoic [Joseon Supergroup(Jangsan Quarzite, Dueumri Formation and Janggum Limestone) and Pyeongan Group(Jaesan and Dongsugok Formations)] metasedimentary rocks and Mesozoic granitoid(Chunyang granite.) This study is to interpret geological structure of the North Sobaegsan Massif in the Jang-gunbong area by analysing rock-structure and microstructure of the constituent rocks. It indicates that its geological structure was formed at least by four phases of deformation after the formation of gneissosity(S0) in the Wonnam Formation and bedding plane(S0) in the Paleozoic metasedimentary rocks. The first phase deformation(D1) formed tight isoclinal fold(F1). Its axial plane(S1) strikes east-west and steeply dips north. Its axis (L1) subhorizontally plunges east-west. The second phase deformation(D2), which was related to ductile shear deformation, formed stretching lineation(L2) and shear foliation(S2). The sense of the shear movement indicates dextral strike-slip shearing(top-to-the east shearing). The third phase deformation(D3) formed open inclined fold(F3). Its axial plane(S3) strikes east-west and moderately or gently dips north. Its axis(L3) subhorizontally plunges east-west. The F3 fold reoriented the original north-dipping S1 foliation and D2 shear sense into south-dipping S1 foliation(top-to-the west shear sense on this foliation) at its a limb. The four phase of deformation(D4) formed asymmetric-type open inclined fold(F4) of NE-vergence with NW striking axial plane(S4) and NW-NNW plunging axis(L4). The F4 fold partly reoriented pre-D4 structural elements with east-west trend into those with north-south trend. Such reorientation is recognized mainly in the Paleozoic metasedimentary rocks.

Treatment of Inclined Boundaries in a Finite Element Model for the Mild-Slope Equation (완경사 방정식을 이용한 유한요소모형에서 경사경계의 처리)

  • Jung, Tae-Hwa;Ryu, Yong-Uk
    • Journal of Korean Society of Coastal and Ocean Engineers
    • /
    • v.24 no.2
    • /
    • pp.84-88
    • /
    • 2012
  • A numerical skill for effective treatment of inclined boundaries in a finite element method is introduced. A finite element method has been frequently used to simulate hydraulic phenomena in a coastal zone since it can be applied to irregular and complex geometry. In case elliptic partial equations are governing equations for a finite element model, however, there is a difficulty in treating boundary conditions properly for cases in which boundaries are vertically inclined. In this study, a method to treat such inclined boundaries using Bessel functions for a finite element method is introduced and compared with analytical solutions.

The Heat Transfer Characteristics on Impinging Surface by Oblique Jet (경사 제트에 의한 충돌면에서의 열전달 특성)

  • 이창호;조형희;정학재
    • Proceedings of the Korean Society of Propulsion Engineers Conference
    • /
    • 1998.10a
    • /
    • pp.28-28
    • /
    • 1998
  • 단일 충돌제트의 경우 충돌면에서의 열전달 효과는 제트 출구와 충돌면 사이의 간격, 노즐 형상에 따른 제트출구의 초기조건, Re$_{D}$수 변화와 충돌면의 형상이나 표면거칠기 등에 따라 변화하게 된다. 그러나 수직 충돌제트의 경우 정체영역에서의 국소적인 열전달 향상은 용이하나 반경 방향으로 열전달이 점차 감소하게 된다. 따라서 충돌면의 전반적인 열전달 향상을 위해서는 열전달이 정체점보다 상대적으로 낮은 영역에서 열전달 향상이 필요하다. 또한, 실제 적용시 충돌면의 형상이나 협소한 공간에서 노즐위치의 제약으로 인하여 충돌제트가 수직으로 분사되는 경우보다 경사진 제트가 더욱 많이 응용된다. 더욱이, 수직충돌제트가 사용되는 많은 상황에서도 주위의 다른 공기 흐름의 영향으로 인하여 실제 제트가 경사각을 갖고 분사되어진다 이러한 경사충돌제트의 중요성에도 불구하고 경사충돌제트에 대한 연구는 수직충돌제트에 대한 연구보다 상대적으로 적게 이루어져 왔다.

  • PDF

Wall Retaining Geosynthetic의 크리이프 특성평가

  • 전한용;김정효;조성호;차동환
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 1998.10a
    • /
    • pp.348-351
    • /
    • 1998
  • 토목 및 건설용으로 사용되는 토목섬유 중 지오그리드는 경사와 위사 방향으로 10~100mm 크기의 aperture가 형성된 격자 구조를 갖는 것을 지칭하며 1980년대에 개발되어 토목공사에 적용되어 왔으며, 강도가 요구되는 방향으로 높은 인장강도를 지님으로써 도로의 기초 지반과 포장층의 보강, 제방과 사면의 보강 및 보강토 옹벽공사용 둥에 사용되고 있다. (중략)

  • PDF

Oblique Angle Effect of Impinging Jet on Heat Flow Characteristics of a Corrugated Structure (충돌제트의 경사각도가 파형 구조의 열유동 특성에 미치는 영향)

  • Hwang, Byeong Jo;Kim, Seon Ho;Joo, Won Gu;Cho, Hyung Hee
    • Journal of the Korean Society of Propulsion Engineers
    • /
    • v.21 no.2
    • /
    • pp.83-93
    • /
    • 2017
  • A numerical analysis is made of the fluid flow and heat transfer characteristics in the corrugated structure that traps the spent air in the corrugations between impinging jets to reduce crossflow effects on downstream jets in the array. All computations are performed by considering three-dimensional, steady state, and incompressible flow by using the ANSYS-CFX 15.0 code. Averaged jet Reynolds number is 10,000. The oblique angles of impingement jets on the spanwise section are $70^{\circ}$, $80^{\circ}$, $90^{\circ}$, and the oblique angles of impingement jets on the streamwise section are $70^{\circ}$, $90^{\circ}$, $110^{\circ}$. The investigation focuses on the oblique angle influence of impinging jet array on the fluid flow and heat transfer characteristics of a corrugated structure.

The Influence of K-ratio and Seepage Velocity on Piping Occurrence (Piping현상 발생에 미치는 투수계수비와 침투유속의 영향에 대한 연구)

  • Huh, Kyung-Han;Chang, Ock-Sung
    • Journal of the Korean Society of Hazard Mitigation
    • /
    • v.8 no.2
    • /
    • pp.129-138
    • /
    • 2008
  • In case of judging the stability of dike or dam structures which need hydraulic interception, the first thing to do is to examine whether a piping phenomenon occurred or not. Generally, dike or dam structures are constructed while layer compacting is executed, so permeability is likely to be anisotropic- different from each other in hydraulic conductivity in the horizontal direction [$k_x$] and hydraulic conductivity in the vertical direction[$k_y$]. This study looked into exit hydraulic gradient and Seepage velocity by conducting an Seepage analysis subsequent to various hydraulic conductivity ratios[k-ratio = ky / kx] and examined the influence on piping by comparing & examining critical Seepage Velocity based on critical hydraulic gradient in theoretical equation and critical Seepage Velocity in empirical equation. As the research result, it was found that hydraulic conductivity ratio operates as a very important factor in case the stability against piping occurrence is considered with the concept of critical hydraulic gradient, but relatively the hydraulic conductivity ratio is very low in its importance in relation to the concept of critical Seepage Velocity.

A study on waterfall classification by form and processes (폭포의 지형학적 분류에 관한 연구)

  • PARK, Kyeong;KIM, Ji Young
    • Journal of The Geomorphological Association of Korea
    • /
    • v.21 no.4
    • /
    • pp.85-96
    • /
    • 2014
  • A waterfall is a channel unit with steep bedrock. No strict criteria for height, water volume, gradient to define waterfalls exist in Korea. The goal of our study is to classify waterfalls based on morphological forms which are the outcomes of developmental processes. The genesis of waterfall depends upon erosional properties of waterfall. The height, gradient, bedrock strength and stream power of waterfalls are regarded as the main factors, by which waterfalls can be classified. We find out that the most important factor for the development of waterfalls is joint system. Development of joint system varies depending on bedrocks. Flow directions and erosional types are decided by the density and direction of joint system in the bedrock, which also decide the height and gradient of stream bed. Joint type decides the gradients of the bed, gradient and height of waterfalls, therefore, decides morphological forms.

Evaluation of the Importance of Variables When Using a Random Forest Technique to Assess Landslide Damage: Focusing on Chungju Landslides (Random Forest를 활용한 산사태 피해 영향인자 평가: 충주시 산사태를 중심으로)

  • Jaeho Lee;Youjin Jeong;Junghae Choi
    • The Journal of Engineering Geology
    • /
    • v.34 no.1
    • /
    • pp.51-65
    • /
    • 2024
  • Landslides are natural disasters that causes significant property damage worldwide every year. In Korea, damage due to landslides is increasing owing to the effects of climate change, and it is important to identify the factors that increase the prevalence of landslides in order to reduce the damage they cause. Therefore, this study used a random forest model to analyze the importance of 14 factors in influencing landslide damage in a specific area of Chungju, Chungcheongbuk-do province, Korea. The random forest model performed accurately with an AUC of 0.87 and the most-important factors were ranked in the order of aspect, slope, distance to valley, and elevation, suggesting that topographic factors such as aspect and slope more greatly influence landslide damage than geological or soil factors such as rock type and soil thickness. The results of this study are expected to provide a basis for mapping and predicting landslide damage, and for research focused on reducing landslide damage.

A Linear Wave Equation Over Mild-Sloped Bed from Double Integration (이중적분을 이용한 완경사면에서의 선형파 방정식)

  • Kim, Hyo-Seob;Jung, Byung-Soon;Lee, Ye-Won
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.12 no.3
    • /
    • pp.165-172
    • /
    • 2009
  • A set of equations for description of transformation of harmonic waves is proposed here. Velocity potential function and separation of variables are introduced for the derivation. The continuity equation is in a vertical plane is integrated through the water so that a horizontal one-dimensional wave equation is produced. The new equation composed of the complex velocity potential function, further be modified into. A set up of equations composed of the wave amplitude and wave phase gradient. The horizontally one-dimensional equations on the wave amplitude and wave phase gradient are the first and second-order ordinary differential equations. They are solved in a one-way marching manner starting from a side where boundary values are supplied, i.e. the wave amplitude, the wave amplitude gradient, and the wave phase gradient. Simple spatially-centered finite difference schemes are adopted for the present set of equations. The equations set is applied to three test cases, Booij's inclined plane slope profile, Massel's smooth bed profile, and Bragg's wavy bed profile. The present equations set is satisfactorily verified against existing theories including Massel's modified mild-slope equation, Berkhoff's mild-slope equation, and the full linear equation.

  • PDF