• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.772-775
• /
• 2007

본 연구에서는 Sentaurus를 이용하여 전압의 변화에 따른 항복전압과 전류의 경계 조건을 나타내려고 한다. 다이오드는 순방향 일 때 전류가 흐르고, 역방향 일 때는 전류가 흐르지 않는다. 하지만 역전압을 계속 올리면 어느 순간에 갑자기 전류가 흐르게 되는데 이때 전압을 항복전압이라 하며 전류의 경계조건은 컬렉터 전류의 변화에 따라 다르게 표현된다. 본 연구에서는 Sentaurus 시뮬레이션 프로그램을 이용하여 항복 전압과 전류의 경계조건을 설계하고자 한다.

• Geotechnical Engineering
• /
• 제12권2호
• /
• pp.95-106
• /
• 1996

In this study, a constitutive model which can describe the anisotropic and plastic behaviors of natural cohesive soils, was developed based on anisotropic bounding surface theory. The model was fomulated by the concepts of the improved anisotropic bounding surface function, nonassociated flow rule with new plastic potential function, anisotropic hardening rule, and new mapping rule governing the plastic behavior inside bounding sutraface. Comparing with the results of Ku consolidation and triaxial shearing tests, the predictions by the proposed model agree quite well with real soil responses.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.433-434
• /
• 2008

반도체 공정 기술의 진보로 인해 InP/InGaAs로 제작된 애벌랜치 포토다이오드가 고속 광통신 시스템에서 사용되고 있다. 하지만 경계 항복에 의한 접합 부분의 강한 전기장으로 인한 문제와 항복 이득의 저하 문제로 소자 특성의 문제가 발생하고 있다. 이 논문에서는 소자 구조 변화에 따른 고속 InP/InGaAs 애벌랜치 포토다이오드의 특성 변화를 공정/소자 시뮬레이션을 이용하여 분석하였다.

• Magazine of the Korea Concrete Institute
• /
• 제7권3호
• /
• pp.139-148
• /
• 1995

The test results from three one fourth scale models using high strength Reinforced Concrete $f_x=704\;kg/cm^2,\;f_y=5.830\;kg/cm^2$ are presented. Such specimens are considered to represent the critical 3 storics of 60-story tall building of a structural wall system in area of high seismicity respectively. They are tested under inplane vertical and horizontal loading. The main varlable is the level of axial stress. The amounts of vertical and horizontal reinforcement are identical for the three walls testcd. The cross-section of all walls is barbell shape. The aspectratio($h_w/I_w$) of test specimen is 1.8. The aim of the study is to investigate the effects of levels of applied axial stresses on the inelastic behavior of high-strength R /C tall walls. Experimental results of high strength R /C tall walls subjected to axial load and simulated sels rnic loading show that it is possible to insure a ductlle dominant performance by promotmg flex ural yielding of vertical reinforcement and that axial stresses within $O.21f_x$ causes an increase in horizontal load-carrying capacity, initial secant st~ffness characteristics, but an decrease in displacement ductility. energy dissipation index and work damage index of high strength K /C tall walls

• Geotechnical Engineering
• /
• 제12권4호
• /
• pp.21-32
• /
• 1996

To predict the stress-strain behavior of the soil more approximately, the concept of the critical state soil mechanics was added to the plasticity increment theory in the bounding surface Plasticity model. This model was constituted with two ellipse and one hyperbola in older to describe the behaviour of the isotropically consolidated soil. Thus, this model is very complicate due to the various parameters used. Therefore, the accurate understanding and skill of the theory is required in order to apply this model to the practical geotechnical problems. In the present paper, the bounding surface shape paraiheter R and A, the mapping center parameter C among various parameters used were varied and the results were numerically analized. Finally, each sensitivity with respect to monotonic and cyclic loading was analized and the range of the value of the each parameter was proposed.

• Journal of the Korean Geotechnical Society
• /
• 제29권1호
• /
• pp.171-181
• /
• 2013

The radial mapping rule in bounding surface model was experimentally investigated by analyzing the drained stress probe tests on Chicago clays. The experimental data obtained from 10 drained stress probe paths were analyzed to calculate the directions of the plastic strain increments. The anisotropic bounding surface model was adopted to represent a bounding yield surface which resides in the pre-consolidation yield stress of undisturbed clays. The projection origins were estimated by finding the interceptions of the straight lines passing through the current stress point and the imaginary yield stress point on the bounding surface. The results show that the projection origin is not fixed at a point but moves toward the direction of the stress probe path after it is established around the initial stress point.

• Journal of Korea Game Society
• /
• 제14권6호
• /
• pp.49-58
• /
• 2014

In particle-based fluid simulation, the yield stress is required for the deformation of the viscoelastic material like gel. von Mises's yield condition has been proposed to implement deformation of viscoelastic objects, but did not express the explosion. Furthermore, von Mises's yield condition is hard to approximate. We propose an ideal yield condition for viscoelastic object that reference from Tresca's yield condition. Unlike conventional particle-based simulation approximate the external power by the deformed length of the object, this paper is approximate the external power by area of the object. We check up that explosion was realistic when a viscoelastic object is compressed under the ideal yield condition.

• Journal of Korean Society of Steel Construction
• /
• 제15권5호통권66호
• /
• pp.499-507
• /
• 2003

As the load is increased on the steel-concrete composite structure, its interface begins to show nonlinear behavior due to the reduction of interaction, micro-crack, slip and separation, and it causes slip-softening, Therefore, it is essential to consider the partial-interaction analysis technique. Until now, however, full-interaction or, in some instances, the linear-elastic model, which are insufficient to simulate accurate behavior, are assumed in the analysis of composite structure since the analysis method and nonlinear model for interface are very difficult and complicated. Therefore, the design of composite structure is followed by the experimental method which is inefficient-because a number of tests have to be carried out according to the design environments. In this study, we carried out the nonlinear analysis according to various interface nonlinear models by interaction magnitude, and analyzed more accurate structural behavior and performance by maximum tangential traction and slip-softening at the interface. As a result of this study. we were able to prove that the nonlinear model of interface more exactly represents behavior after yielding, such as ultimate load: that initial tangential stiffness of interface has a significant effect on the yielding load of structural members or part: and that the maximum tangential traction and slip-softening mainly effects structural yielding and ultimate load. Therefore, the structural performance of composite structure is highly dependent on the steel-concrete interface or interaction, which may result in initial tangential stiffness, maximum tangential traction and slip-softening in nonlinear model.

• Computational Structural Engineering
• /
• 제9권4호
• /
• pp.181-187
• /
• 1996

This paper concerns the singular thermal stresses at the interface corner between the elastic fiber and the viscoelastic matrix of a two-dimensional unidirectional laminate model induced during cooling from cure temperature down to room temperature. Time-domain boundary element method is employed to investigate the nature of residual thermal stresses at the interface. Numerical results show that very large stress gradients are present at the interface corner and such stress singularity might lead to local yielding or fiber-matrix debonding.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• 제43권4호
• /
• pp.469-476
• /
• 2023

Soil plasticity models for cyclic and dynamic loads are essential in non-linear numerical analysis of geotechnical structures. While a single yield surface model shows a linear behavior for cyclic loads, J₂-bounding surface plasticity model with zero elastic region can effectively simulate a nonlinearity of the ground response with the same material properties. The radius of the yield surface inside the boundary surface converged to 0 to make the elastic region disappear, and plastic hardening modulus and dilatancy define plastic strain increment. This paper presents the stress-strain incremental equation of the developed model, and derives plastic hardening modulus for the hyperbolic model. The comparative analyses of the triaxial compression test and the shallow foundation under the cyclic load can show stable numerical convergence, consistency with the theoretical solution, and hysteresis behavior. In addition, plastic hardening modulus for the modified hyperbolic function is presented, and a methodology to estimate model variables conforming 1D equivalent linear model is proposed for numerical modeling of the multi-dimensional behavior of the ground.