• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.3
• /
• pp.180-187
• /
• 2014

The purpose of this study is to evaluate on the mechanical properties of High Volume Mineral Admixture(HVMA) high strength concrete to reduce the amount use of Ordinary Potland Cement, to discover the optimized HVMA binder and to test HVMA concrete based on the change of W/B and curing temperature. The results were shown as follows: The HVMA binder using the mixture of combined heat power plant fly ash and anhydrous gypsum known as inorganic activators with the mixture of blast furnace slag and fly ash was optimized. The mixture of HVMA high strength concrete at 26% of W/B ratio had a good result on flow characteristic and mechanical properties. High strength HVMA concrete over 50MPa is possibly manufactured over curing temperature $20^{\circ}C$.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.160-167
• /
• 2017

The purpose of this study is to identify the possibility of developing the 100% Recycled-resources Absorbent-Pervious Alkali-activated Blocks using both the alkalli-binder and the recycled aggregate. In addition, It established a test method such as Void ratio, compressive strength, coefficient permeability, absorption, and evaporation. As a result, an alkali-activated using recycled aggregate block was able to manufacture an 24 MPa class absorbent-pervious blocks with a liquid type sodium silicate and early high temperature curing. In this case, water-holding capacity, absorption and relative absorption were more effective than the natural aggregates. In conclusion, Absorbent-pervious alkali-activated Block Using recycled aggregate has a surface temperature reducing effect of approximately 10 % compared to ordinary concrete block.

• Magazine of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.49-54
• /
• 2002

아직까지 우리나라에서 폴리머 시멘트 콘크리트가 콘크리트와 같이 광범위하게 사용되고 있는 것은 아니지만 건설재료로서의 사용이 증가하는 추세에 있다. 폴리머 콘크리트의 제조에는 결합재로서 물이나 시멘트가 전혀 사용되지 않고 수지(resin)만을 사용한다. 각종 수지가운데 많이 이용되고 있는 것은 에폭시 수지, 불포화 폴리에스테르 수지, 우레탄 수지, 퓨란 수지 등이 있다. 그러나 원료사정이 국가마다 다르기 때문에 폴리머 콘크리트의 결합재로 사용되는 액상수지 역시 차이가 있다. 우리나라의 경우는 에폭시수지, 불포화 폴리에스테르 수지 및 우레탄 수지가 주로 사용되고 있으며, 가까운 일본의 경우는 폴리머 콘크리트의 결합재로서 워커 빌리티, 저온경화성, 내후성 등이 우수한 메타크릴산 메틸도 사용되고 있다. 또한 폴리머 모르타르 및 콘크리트의 경화반응에 방해를 주지 않도록 충전재 및 골재 등은 건조시켜 함수율이 0.5 % 이하가 되도록 사용하고 있으나, 지금은 흡수제, 가교제 등의 혼화재료가 개발되어 함수율을 3% 까지 허용하고 있으며, 지금까지 불가능하게 생각되었던 폴리머 콘크리트에 대한 레디믹스트 콘크리트(레미콘) 개발도 흥미를 끌고 있다.(중략)

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.2 no.3
• /
• pp.247-254
• /
• 2014

The present study prepared lightweight foam-soil concrete mixtures classified into three groups. Considering the sustainablility, workability, and compressive strength development of such concrete, high-volume supplementary cementitious materials (SCMs) were used as follows: 20% cement, 15% fly ash, and 65% ground granulated blast-furnace slag. As main test parameters selected for achieving the compressive strength of 1MPa and dry density of $1,000kg/m^3$, the unit solid content (dredged soil and binder) ranged between 900 and $1,807kg/m^3$, and soil-to-binder ratio varied between 3.0 and 7.0. Test results revealed that the flow of the lightweight foam-soil concrete tended to decrease with the increase of unit soil content. The compressive strength of such concrete increased with the increase with the unit binder content, whereas it decreased as soil-to-binder ratio increased, indicating that the compressive strength can be formulated as a function of its dry density and soil-to-binder ratio.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.9 no.2
• /
• pp.173-180
• /
• 2005

Metakaolin is a cementitious material for producing high-strength concrete. This material is now used as substitute for silica-fume. In this paper, we did the mechanical and durability test such as compressive/tensile/flexural strength test, chloride ion diffusion, chemical attack and repeated freezing and thawing, carbonation test. In the mechanical tests, 10~15% for binder is optimum substitute rate. And, in the chloride ion diffusion test, according to the increase of substitute of metakaolin & silica-fume for binder, the diffusion coefficient was more reduced. In the chemical attack test, by the filler effect of fine powder such metakaolin and silica-fume, the resistance is more excellent than normal concrete. In the other durability test, the concrete using metakaolin also compared with those of silica-fume substitute concrete. Through these tests, we recognized that metakaolin can be used as a substitute for silica-fume.

• Korean Chemical Engineering Research
• /
• v.49 no.1
• /
• pp.120-127
• /
• 2011

For the development of the environment-friendly insulating composite materials, natural cellulose (wood chip and sawdust) was used as a core material and activated Hwangtoh was used as a binder. Various specimens were prepared with the water/binder ratio and natural cellulose/binder ratio. The physical properties of these specimens were then investigated through compressive and flexural strength test, absorption test, hot water resistance test, thermal conductivity, measurement of pore distribution and observation of micro-structures using scanning electron microscope (SEM). Results showed that the absorption ratio increased with the increase of natural cellulose/binder ratio but decreased remarkably with the increase of polymer/binder ratio. The compressive and flexural strength development varied appreciably with the increase of water/binder ratio and natural cellulose/binder ratio. On the other hand, thermal conductivity decreased with the increase of natural cellulose/binder ratio and polymer/binder ratio. Through SEM, it was found that activated Hwangtoh that reacted with water formed a hydrate crystal leading to the compact structure and the total pore volume of the specimen using activated Hwangtoh was smaller than that of the non-activated Hwangtoh.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.3
• /
• pp.240-245
• /
• 2013

The optimum binder ratio of the low heat mass concrete for LNG tank was evaluated in the present study. Three types of binder such as OPC I, ground granulated blast-furnace slag powder were mixed and were used. Also fine particle cement and activator were used to raise an early age strength development and ground limestone was used to reduce the cost. As a result of the study, mix ratio II (30:30:40) was suitable for Bottom Center and mix ratio III(40:30:30) was suitable for Roof based on compressive strength and semi-adiabatic temperature.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1993.04a
• /
• pp.148-148
• /
• 1993

본 실험에서는 유전자 재조합으로 제조한 [$^{125}$ I]-labeled human GM-CSF을 사용하여 GM-CSF의 HL-60 (promyelocytic leukemic cell)의 표면에 존재하는 GM-CSF의 수용체의 특성을 알고 GM-CSF의 수용체에 어떤 parameter로 결합하는지를 밝히고 나아가 현재 사용되고 있는 유전자 재조합으로 제조된 Prokine(Sargramostim)과 Lucky에서 제조된 GM-CSF (LDB-005)의 수용체에 대한 결합율을 측정, 비교하고자 하였다. 본 실험의 결과를 보면 유전자 재조립으로 제조된 Human[$^{125}$ I] GM-CSF가 HL-60 cell에 대하여 선택적으로 결합하고 표면수용체에 saturable하게 결합함을 알 수 있었으며 scatchard analysis 결과한 종류의 GM-CSF의 K3값은 2.03$\times$$10^{9}$/M로($IC_{50}$/=~493pM) 세포당 결합부위의 수는 75개 정도로 J. DiPersio et al과 Linda S. Park et al.의 보고와 비슷한 결과를 얻었다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.86-93
• /
• 2020

Shotcrete concrete is generally used in the form of ready-mixed concrete products using type I ordinary portland cement(hereinafter referred to as OPC) and about 5% of accelerator mixed separately in the field. In this study, we tested the effect of addition of slag powder(SP) and limestone powder(LSP) on a penetration resistance, compressive strength of binder for shotcrete using calcium aluminate type accerlerator. And we analysed hydrates and pore structure effects on mortar performance. In the future, it is expected to be useful for manufacturing optimized composite cement as a binder for shotcrete.

• Applied Chemistry for Engineering
• /
• v.29 no.2
• /
• pp.201-208
• /
• 2018

The ortho- and iso- type unsaturated polyester resins were synthesized and used as a polymer binder of the polymer mortar composite. Styrene monomer and acrylonitrile were used as a diluent for the unsaturated polyester resin. Methyl ethyl ketone peroxide (MEKPO) and cobalt octoate (CoOc) were used as a curing agent and an accelerator, respectively. Four kinds of unsaturated polyester resins were prepared according to types of the resin and diluent, and used as a polymer binder in the preparation of the specimen. A total of 16 polymer mortar specimens were prepared according to the added amount of the polymer binder and subjected to a hot water resistance test, followed by compressive and flexural strength tests, and pore and SEM analyses. As a result, it was found that the strength of the specimen using the iso-type unsaturated polyester resin as the polymer binder was better than that of using the ortho-type unsaturated polyester resin. The total pore volume and diameter measured after the hot water resistance test were reduced compared to the values before the test. In the micrographs observed before the hot water resistance test, the polymer binder, filler and fine aggregate were firmly combined to the co-matrix, but the polymer binder was mostly decomposed in the micrographs observed after the test.