• Proceedings of KOSOMES biannual meeting
• /
• 2006.05a
• /
• pp.15-20
• /
• 2006

In this study, we had investigated several input factors and output factors, to maintain safety management, of domestic shipping companies, and then had analyzed the efficiency of performance of performance about each shipping companies' safety management system from 1998 year to 2004 year using DEA method As the result of analysis, the annual mean efficiency of total companies tended downward every year. Analysis was that the cause was increase of the cost of repairing ship, the cost of ship's stores and idle day of ship.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.11 no.5
• /
• pp.160-170
• /
• 2007

This study predicts Life Cycle Cost of RC Slab bridge case in maintenance and operation level and calculated economic efficiency by the avoidable costs of a bridge. This result of the study can be summarized as follow: (1) LCC analysis model on the bridge case is suggested. (2) Maintenance and operation level of a bridge have been divided, and LCC of the bridge case has been predicted at current maintenance and operation level and required maintenance and operation level. (3) Reduction costs is predicted by LCC of the bridge case, and its economic efficiency is calculated.

• Journal of Food Hygiene and Safety
• /
• v.24 no.3
• /
• pp.277-284
• /
• 2009

Currently food-borne disease is being increased at outdoor food services including hotels and restaurants. Speedy and convenient practical monitoring techniques to determine hygienic conditions are needed. This study was designed to verify correlation of direct ATP (Adenosine Tri-Phosphate) examination method using ATP bioluminescence and surveillance with check-list by inspector. Hygienic status of personal hygiene (hands), kitchen utensils (knives, chopping boards, kitchen towels, cap openers, food storage containers, and blade of slice machines), facilities and equipments (refrigerator handles, worktables, and sinks) in five major hotels in Seoul were examined. The result of personal hygiene of hotels was relatively better than other inspection items (46.6 points in personal hygiene, 40.2 points in kitchen utensils, 40.3 points in facilities & equipments). In ATP inspection, kitchen utensils and facilities & equipments were relatively clean comparing with personal hands data ($40.8{\pm}6.77\;RLU/cm^2$). After correlation analysis of surveillance in hygienic status points and ATP value, all results showed negative and high correlation. The surveillance data and ATP results investigating personal hygiene, kitchen utensils and facilities & equipments were highly correlated. The ATP examination method which shows real-time identification could be considered as an appropriate method to alternate current check-list dependent safety management in food services including hotels.

• Journal of Korean Society of Forest Science
• /
• v.89 no.1
• /
• pp.9-17
• /
• 2000

The objective of this study was to identify and evaluate indicators which offer the significant influence on recreationists' experiences. Delphi survey technique with a panel of professionals was employed to collect data for this study. The Delphi process was designed with three round questionnaires. The identified indicators in this study should be basic information for Benefit-Based Management (BBM) Model for forest recreation areas. A list of 38 indicators relating to physical/biological, managerial and social components of recreation experiences submitted from three round questionnaires. From the results, indicators included in physical/biological category suggested as more important ones than other categories of indicators.

• The Journal of the Korea Contents Association
• /
• v.12 no.2
• /
• pp.60-68
• /
• 2012

This paper describes design and implementation of a distributed rendering management system using existing rendering module. Currently, most of 3D commercial software provide modeling, rendering and distributed environment in the whole package. So, the server and client should use the given renderer as is, without the required features. In this paper, we propose a distributed rendering management system that consist of rendering module and distributed rendering client-server. The rendering module can be executed independently and managed by the distributed rendering client. The server requests rendering for each connected client. After the execution, the server gathers rendering result from each client. After gathering, the server provides the rendering result to the user.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.141-141
• /
• 2023

본 연구에서는 음향센싱 기법을 활용하여 소류사량 계측이 가능한 센서인 파이프 하이드로폰을 2가지 형태로 개발하여 설치 형태에 따른 소류사량 계측 성능을 비교·분석하였다. 파이프 하이드로폰은 수리구조물 끝단에 설치하는 부착식 하이드로폰과 하천 하상에 설치 가능한 형태로 제작하였으며, 파이프 하이드로폰의 실내 실험을 위한 수리실험장치를 구축하였다. 소류사 음향 데이터를 수집 및 저장하기 위해 National Instrument사에서 개발된 LabVIEW 언어를 이용하여 데이터 분석 프로그램을 개발하였으며, 데이터를 시계열 그래프로 표출하여 센서를 통해 계측되는 소류사의 특성을 분석하였다. 분석 결과 하천 하상 설치 형태의 파이프 하이드로폰은 후류가 발생하여 센서 후면으로 소류사가 재충돌되는 현상이 발생하였으며, 이에 6~9% 정도의 과다 산출되는 것을 확인할 수 있었다. 또한 소류사가 센서에 퇴적되어 지속적인 데이터를 취득하기에는 적합하지 못할 것으로 판단되었다. 동일한 조건으로 실험한 부착식 하이드로폰은 후류로 인한 재충돌 현상 및 퇴적현상 또한 발생하지 않았으며, 소류사량 추정 결과 90.9%로 양호한 수준의 성능이 확인되었다.

• Spatial Information Research
• /
• v.18 no.1
• /
• pp.57-67
• /
• 2010

Recently, 2D GIS technology is applied for urban facility management. However, urban facilities are located in 3D space and the information loss is occurring during data abstraction from 3D urban facility to 2D object. Also, the number of urban facilities is increasing steadily and most of urban facilities are located in underground space in the city. Therefore 2D urban facility management system has a limitation on visualization and management for a large number of urban facilities. In this paper, a multi-dimensions urban facility management system based on multi-texture technology is proposed. The proposed system reduces the information loss and improves the readability of information by visualizing urban facilities on 3D virtual space. A multi-texturing technology is applied for integrating of 2D vector data and 3D raster data, and a multi-thread technology is used for improving speed and performance of the system. The proposed technology can be used as a guideline for urban facility monitoring as providing visual information of a facility status with 3D image and facility data.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.32 no.2
• /
• pp.87-92
• /
• 2019

In this paper, we have verified a low-voltage EM(elasto-magnetic) sensing technique for tensile force management of PSC(prestressed concrete) internal tendon in order to apply the technique to actual construction sites where stable power supply is difficult. From observation of past domestic and overseas PSC structural accident cases, it was found that PS tension is very important to maintain structural stability. In this paper, we have tried to measure the tensile force from a magnetic hysteresis curve through EM sensors according to voltage value by using relation between magnetostriction and stress of ferromagnetic material based on elastic-magnetic theory. For this purpose, EM sensor of double cylindrical coil type was fabricated and tensile force test equipment for PS tendon using hydraulic tensioning device was constructed. The experiment was conducted to confirm relationship between changes of permeability and tensile force from the measurement results of the maximum / minimum voltage amount. The change of magnetic hysteresis curve with magnitude of tensile force was also measured by reducing amount of voltage step by step. As a result, the slope of estimation equation in accordance with magnitude of magnetic field decreases with the voltage reduction. But it was confirmed a similar pattern of change of magnetic permeability for the magnetic hysteresis loop. So, in this study, it is considered that it is possible to manage the tensions of PSC internal tendon using EM sensing technique in low-voltage state.

• Journal of Korea Multimedia Society
• /
• v.8 no.4
• /
• pp.554-568
• /
• 2005

We suggest the dynamic stroke generation algorithm that provides frame-to-frame coherence in 3D non-photorealistic animations. We use 3D particle system to eliminate the visual popping effect in the animated scene. Since we have located particles on the 3D object's surface, the coherence is maintained when the object or the camera is moving in the scene. Also, this algorithm maintains the coherence when camera is zooming in/out. However, the brush strokes on the surface also zoom in/out. This result(too large or too small brush strokes) can not represent hand-crafted brush strokes. To remove this problem, we suggest stroke generation algorithm that dynamically maintains the number of brush stroke and its size during camera zoom in/out.

• Journal of the Korean Society for information Management
• /
• v.25 no.2
• /
• pp.49-68
• /
• 2008

In many information retrieval experiments, the data fusion techniques have been used to achieve higher effectiveness in comparison to the single evidence-based retrieval. However, there had not been many image retrieval studies using the data fusion techniques especially in combining retrieval results based on multiple retrieval methods. In this paper, we describe how the image retrieval effectiveness can be improved by combining two sets of the retrieval results using the Sobel operator-based edge detection and the Self Organizing Map(SOM) algorithms. We used the clip art images from a commercial collection to develop a test data set. The main advantage of using this type of the data set was the clear cut relevance judgment, which did not require any human intervention.