• Information Systems Review
• /
• v.9 no.2
• /
• pp.149-168
• /
• 2007

As the need for quantitative qualities of IT investment performance heightens, numerous research organizations are developing various measurement methods for the quantitative evaluation and its currency value conversion. Corporations utilizing these methods to evaluate IT investment performance are gradually increasing. However, working-level staff in the corporations that have introduced the quantitative evaluation can not assure if the evaluation sufficiently reflects the actual effect provided by IT since the results arising from the conversion of currency value can't be visibly confirmed. This study tries to identify whether the quantitative evaluation of IT investment performance can be explained in terms of the level of consumer satisfaction proven by the qualitative evaluation by analyzing the level of consumer satisfaction and quantitative evaluation of a case company and identifying the correlation between them. As the result of the case study, the following points have been concluded. Firstly, the currency value of IT effect correlates with the level of consumer satisfaction. Secondly, in order to come up with a rational currency value of IT effect, developing an indicator as well as managing data on currency conversion that will enable the internal system's efficiency to become more quantitative is essential. Thirdly, IT ROI is not appropriate to compare the performance between systems and is utilized as a measurement standard for each system's performance and efficiency. Lastly, quantitative evaluation is still inadequate in the evaluation of the system's strategic side, and consumer satisfaction can be utilized as a supplementary method.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.727-737
• /
• 2011

The emergency restoration scenarios for efficient railway accident management and restoration were developed. The emergency restoration procedures defined by the worst case of emergency restoration and the important events was proposed based on questionnaires from specialists and the result of survey. Via these studies, the railway accident in the tunnel could be the worst case among all railway accident types. Therefore, educations for a restoration team in confined area condition should be planned and performed to recover the worst case accident. In order for the emergency restoration, when a railway accident is occurred, the restoration should be performed in orders of handing collapse of facilities, burying track, and derailment of vehicle in tunnel based on the statistical analysis. The result of priorities were established by the period of restoration. The standard operation system for efficient railway accident management was developed by synthesizing the worst case for rapid emergency restoration, and important events for the standard operation procedures according to each emergency restoration type. Through this study, the restoration operation system of railway accident are recommended. This paper suggests to develop emergency restoration scenarios for the efficient railway accident management and recovery system. The study results will contribute not only for insuring punctuality, but also for minimizing delays from accidents. Therefore, emergency restoration scenarios will play a major role in the SOP for the damage limitation and the prevention of accident spread.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.9 no.3
• /
• pp.47-61
• /
• 2014

Many angel investors hesitate to invest in early-stage company. Most early-stage company has no sales and only R&D step project or in early approach of market. So it's impossible to evaluate early-stage company quantitatively. Therefore many angel investors depend on CEO's tendency to evaluate company and make decision for investment. The purpose of this study is discover the entrepreneurial characteristics of CEO and the importance level which affect on the angel investors decision making factors for investment. To identify the factors of entrepreneurial characteristics, survey was conducted by Delphi Technique which is involved by 20 experts who is angel investment club members, venture capitalists, CEOs and officers. Three rounds of survey results derived 10 elements of entrepreneurial characteristics for investment decision making factors including reliability, risk sensitivity, passion, perseverance, integrity, leadership, startup experience, organizational management skills, innovation and social networking. In addition, this study derived the importance level of elements of entrepreneurial characteristics based on the AHP(Analytic Hierarchy Process) theory and maintained the logical consistency by pair-wise comparison for each element. As a result of analyzing the importance of entrepreneurial characteristics, the sequence is reliability (18.1%), integrity (15.9%), leadership (11.7%), organizational management skills (10.0%), social networking (9.5%), passion(9.1%), perseverance(8.4%), innovation(8.1%), startup experience(5.3%) and risk sensitivity(3.9%) respectively. The significance of this study is somewhat decrease limit of the uncertainty arising from angel investors and angel investors can help a decision making, by discover factors of entrepreneurial characteristics that can be called the biggest influencing factors among Investor's investment decision-making In early stage companies and compare importance.

• Journal of Korea Port Economic Association
• /
• v.34 no.4
• /
• pp.39-52
• /
• 2018

The Seosan-Daesan Port is a representative trade port in Chungnam, and has the sixth largest total cargo throughput and the third largest oil cargo throughput in Korea. However, research on this port's development is lacking relative to that for Busan Port, Incheon Port, and Gwangyang Port, and no study exists that suggests the direction of the development strategy for Seosan-Daesan Port. This study discusses the future role of Seosan-Daesan Port in preparation for a rapidly changing future and the development strategy that should be established. Using the AHP, a development strategy is provided for Seosan-Daesan Port from short/mid-term and long-term viewpoints for three aspects: operation activation, infrastructure construction, and policy support. Operation activation is chosen as the most significant factor from a short/mid-term viewpoint, whereas infrastructure construction is recognized as important from a long-term viewpoint. Specifically, from a short/mid-term viewpoint, sustainable container cargo attraction, multipurpose dock construction, management pier construction, and opening of international passenger ferry lines are important factors while from the long-term viewpoint, hinterland construction, petrochemical industry cluster construction, automobile industry cluster construction, and management improvement system are important. Establishing action plans for each strategy and a cooperative network for sharing goals and strengthening cooperation is necessary.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.6
• /
• pp.101-110
• /
• 2022

Recently, the global construction market is expected to grow at an annual average of 4.8% by 2025 and the risk of overseas construction is also expected to increase accordingly. In particular, domestic construction companies intensively participated in the EPC(Engineering, Procurement, Construction)/Turnkey project, but as a result of failing to respond to contractual risks, they have suffered losses of trillions of won in overseas business since 2013. Nevertheless, there have been not many studies on the derivation of EPC/Turnkey's contractual key risk sub-clauses. Therefore, in this study, the key risk sub-clauses were studied for the conditions of the 2017 Silver Book contract issued by the International Consulting Engineering Federation(FIDIC). To this end, 30 experts with more than 10 years of experience in international construction contracts were formed as a panel to conduct a Delphi survey on 170 sub-clauses of 21 clauses of FIDIC Silver Book to derive 62 main risk sub-clauses. In addition, the RPN(Risk Priority Number) was finally calculated using the FMEA(Failure Mode and Effect Analysis) technique, and 25 key risk sub-clauses within the Critical Risk range were derived. Through the results of this study, the practical point of view is able to refer to the contract provisions to be carefully reviewed at the bidding and contract signing stage in overseas construction projects. From an academic point of view, it provides direction and basic knowledge of how to study the contract fields used in overseas construction EPC/Turnkey projects.

• Journal of Wetlands Research
• /
• v.26 no.1
• /
• pp.1-9
• /
• 2024

In this study, a HSPF model was developed to simulate runoff and water quality in the Haebancheon watershed, which has a high land area ratio and population density among the West Nakdong River watersheds. Various non-point source pollution control strategies were applied, and the reduction in pollutant loads and the exceedance rate of water quality standards were analyzed. The scenarios included basic road cleaning for reducing pollutant loads, runoff reduction measures considering extensive low-impact development techniques, and inflow reduction measures to mitigate non-point source pollution entering the river. In the first step, practical conditions such as the number of vehicles for road cleaning in Kimhae City were considered, while for the second and third steps, it was assumed that 50% of the applicable land use area was used to be applicable for the LID techniques. As a result of applying all three measures, it was analyzed that the BOD pollutant load could be reduced by 58.28%, T-N by 58.49%, and T-P by 51.56%. Furthermore, the 60th percentile of water quality measurements accumulated over 5 years was set as the target water quality, and a flow-duration curve was constructed. The exceedance rate of the flow-duration curve before and after applying non-point source pollution reduction measures was analyzed. As a result, for BOD, the exceedance rate decreased from 41.57% before applying the measures to 16.32% after, showing a 25.25% reduction in the exceedance rate. For T-N, the exceedance rate decreased significantly from 40.31% before the measures to 22.84% after, and for T-P, it decreased significantly from 62.43% to 27.22%.

• Journal of Korea Water Resources Association
• /
• v.57 no.10
• /
• pp.785-795
• /
• 2024

In this study, the Seasonal and Trend Composition Using Loess (STL) technique, which enables time series analysis, was applied to indirectly identify the contribution of water quality between nearby water quality measurement points and to interpret the influence between the main stream and tributary streams in the Miho River basin. This technique can identify and remove outliers in the time series data of the water system and analyze water quality change trends and seasonal characteristics. In addition, in order to analyze the correlation and similarity between water quality data at adjacent measurement points, a correlation analysis was conducted, and the points where common factors affect the water quality of the mainstream and inflow tributaries were classified. As a result of factor analysis between points judged to have high correlations in Miho River, it was found that the influence of the mainstream was absolute over tributaries, and it was analyzed that water quality management for the mainstream including the upstream of the Miho River should be given priority. As the degree of water quality influence between points can be analyzed by the method used in this study, it is judged that it can be effectively applied to the development of alternatives for water quality management of rivers in the future.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.386-395
• /
• 2010

The steam generator management program(SGMP) has recently defined the procedures for the qualification of eddy current hardware and technique. These procedures provide two basic methods for qualification. The first way is to qualify the equipment or the probe by using the flaw mechanism and method of the pulled tubes from the heat exchangers or the artificial flawed tubes. The second way is to verify the equivalency with the characteristics of the qualified equipment or probe. In this case, the qualified equipment or probe may be modified to substitute or replace instruments or probes without re-qualification provided that the range of essential variables defined in the examination technique specification sheet are met. This study is to describe the result of the comparative performance evaluation of bobbin coil eddy current probes manufactured by KEPCO Research Institute and probes manufactured by a foreign manufacturer. As a result of this study, although there were minor differences between the two kinds of probes, it was evaluated that the two kinds of probes were almost identical in the significant performance characteristics described in the KEPCO Research Institute guideline.

• Korean Journal of Heritage: History & Science
• /
• v.42 no.1
• /
• pp.122-142
• /
• 2009

This study explored all domestic and international theories for maintenance and health enhancement of an old and big tree, and carried out the anatomical survey of the operation part of the tree toward he current status of domestic surgery and the perception survey of an expert group, and drew out following conclusion through the process of suggesting its reform plan. First, as a result of analyzing the correlation of the 67 subject trees with their ages, growth status. surroundings, it revealed that they were closely related to positional characteristic, damage size, whereas were little related to materials by fillers. Second, the size of the affected part was the most frequent at the bough sheared part under $0.09m^2$, and the hollow size by position(part) was the biggest at 'root + stem' starting from the behind of the main root and stem As a result of analyzing the correlation, the same result was elicited at the group with low correlation. Third, the problem was serious in charging the fillers (especially urethane) in the big hollow or exposed root produced at the behind of the root and stem part, or surface-processing it. The benefit by charging the hollow part was analyzed as not so much. Fourth, the surface-processing of fillers currently used (artificial bark) is mainly 'epoxy+woven fabric+cork', but it is not flexible, so it has brought forth problems of frequent cracks and cracked surface at the joint part with the treetextured part. Fifth, the correlation with the external status of the operated part was very high with the closeness, surface condition, formation of adhesive tissue and internal survey result. Sixth, the most influential thing on flushing by the wrong management of an old and big tree was banking, and a wrong pruning was the source of the ground part damage. In pruning a small bough can easily recover itself from its damage as its formation of adhesive tissue when it is cut by a standard method. Seventh, the parameters affecting the times of related business handling of an old and big tree are 'the need of the conscious reform of the manager and related business'. Eighth, a reform plan in an institutional aspect can include the arrangement of the law and organization of the old and big tree management and preservation at an institutional aspect. This study for preparing a reform plan through the status survey of the designated old and big tree, has a limit inducing a reform plan based on the status survey through individual research, and a weak point suggesting grounds by any statistical data. This can be complemented by subsequent studies.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.3
• /
• pp.79-88
• /
• 2022

Cable-supported bridges, as important large infrastructures, require a long-term and systematic maintenance strategy. In particular, various methods have been proposed to secure safety for the bridges, such as installing various types of sensor on members in the bridges, and setting management thresholds. It is evidently necessary to propose a strategic plan to efficiently manage increasing number of cable-supported bridges and data collected from a number of sensors. This study aims to develop an analysis tool that can automatically remove abnormal signals and calculate statistical results for the purpose of efficiently analyzing a wide range of data collected from a long span bridge measurement system. To develop the tool, basic information such as the types and quantity of sensors installed in long span bridges and signal characteristics of the collected data were analyzed. Thereafter, the Humpel filtering method was used to determine the presence or absence of an abnormality in the signal and then filtered. The statistical results with filtered data were shown. Finally, one cable-stayed bridge and one suspension bridge currently in use were chosen as the target bridges to verify the performance of the developed tool. Signal processing and statistical analysis with the tool were performed. The results are similar to the results reported in the existing work.