• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.4
• /
• pp.401-409
• /
• 2012

Ultrasonic testing are far superior to other nondestructive tests for detecting the disbond interface which occurred in adhesive interface. However, a solid rocket motor consisting of a steel case, rubber insulation, liner, and propellant poses many difficulties for analyzing ultrasonic waves because of the superposition of reflected waves and large differences in acoustic impedance of various materials. Therefore, ultrasonic tests for detecting the disbond interface in solid rocket motor have been applied in very limited areas between the steel case and rubber insulation using an automatic C-scan system. The existing ultrasonic test cannot detect the disbond interface between the liner and propellant of a solid rocket motor because most of the ultrasonic waves are absorbed in the rubber material which has low acoustic impedance. This problem could be overcome by analyzing the resonance frequency from the frequency spectrum using the ultrasonic resonance method. In this paper, a new technique to detect the disbond interface between the liner and propellant using ultrasonic resonance characteristics is discussed in detail.

• The Journal of Information Technology
• /
• v.7 no.1
• /
• pp.155-161
• /
• 2004

During normal machine operation, partial discharge(PD) measurements were performed with turbine generator analyzer(TGA) in imitation stator winding of high voltage motors. The motor was energized to 4.47kV, 6.67, respectively. Applied voltage to Imitation winding was used two voltage level, 4.47[kV] and 6.67[kV]. Motors having imitation stator winding were installed with 80pF capacitive couplers at the terminal box. Case of PD Pattern regarding applied voltage phase angel, the PD patterns were displayed two dimensional and three dimensional. TGA summarizes each plot with two quantities such as the normalized quantity number(NQN) and the peak PD magnitude(Qm). As the result, we could discrimidate using TGA the difference of internal and surface discharge for imitation stator winding. We have used the other technique, in order to feature extraction of faulty signals on stator winding, Daubechies Discrete wavelet transform and Harmonics analysis(FFT) about faulty signals.

• Journal of Advanced Navigation Technology
• /
• v.7 no.1
• /
• pp.38-50
• /
• 2003

In this paper, a new high resolution reflectometry scheme, time-frequency domain reflectometry (TFDR), is proposed to detect and locate fault in wiring. Traditional reflectometry methods have been achieved in either the time domain or frequency domain only. However, time-frequency domain reflectometry utilizes time and frequency information of a transient signal to detect and locate the fault. The time-frequency domain reflectometry approach described in this paper is characterized by time-frequency reference signal design and post-processing of the reference and reflected signals to detect and locate the fault. Design of the reference signal in time-frequency domain reflectometry is based on the determination of the frequency bandwidth of the physical properties of cable under test. The detection and estimation of the fault on the time-frequency domain reflectometry relies on the time-frequency domain reflectometry is compared with commercial time domain reflectomtery (TDR) instrument. In these experiments provided in this paper, TFDR locates the fault with smaller error than TDR. Knowledge of time and frequency localized information for the reference and reflected signal gained via time-frequency analysis, allows one to detect the fault and estimate the location accurately.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.05a
• /
• pp.219-221
• /
• 2018

테스팅에서 발견하지 못한 결함은 시스템 운용 중 막대한 영향을 미친다. 국방에서 실시간 정보의 공유는 신속한 지휘결심과 임무능력으로 이어진다. 잠수함 분산 데이터 시스템(Data Distribution System)은 함의 운용술과 관련된 중요한 시스템 중 하나이므로, DDS의 데이터 연동 특성을 분석하고 효율적인 연동테스트 기법을 제시한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.10b
• /
• pp.228-232
• /
• 2006

Ontology를 이용한 분산 시각미디어 검색 프레임워크인 HERMES(The Retrieval Framework for Visual Media Service)[1][2]는 보다 정확한 시각미디어 정보를 제공하고 웹서비스(Web Services)를 적용하여 HERMES/Provider[1][2]의 자율성을 보장한다. 웹기반의 분산 환경에서 Visual Media Data에 대한 지능적인 검색을 위하여 Meta Data와 Ontology를 이용하고 이기종간 통신을 위한 웹서비스를 제공하는 HERMES/ Broker[1][2]에서 예상치 못한 문제가 발생할 경우 문제를 해결할 수 있는 방법이 제시되지 않았다. 일반적으로 웹 서비스를 제공하는 서버에서 발생되는 결함은 해당 웹 서비스를 이용하여 개발되는 어플리케이션의 갑작스런 중단이나 오류의 원인이 된다. 따라서 결함을 해결할 수 있는 대책이 필요하며 HERMES의 Broker 서버 또한 웹 서비스의 결함이 발생하더라고 이를 효과적으로 해결하여 클라이언트에게 웹 서비스를 정상적으로 제공할 수 있는 결함허용 시스템 도입이 매우 중요하다. 때문에 HERMES 프레임워크가 클라이언트에게 신뢰성과 안정성이 보장된 웹 서비스의 제공을 위해서 Broker 서버에서 발생할 수 있는 결함을 효과적으로 극복할 수 있는 메커니즘이 필요하다. 본 논문에서는 Broker 서버 에서 웹 서비스와 관련된 결함이 발생하더라고 올바르게 운영될 수 있으며 분산 이미지 검색 프레임워크인 HERMES의 구조적 특성에 적합한 결함허용 시스템 설계 기법을 제안하여 HERMES 프레임워크가 클라이언트에게 투명성 있는 서비스를 제공하고 높은 신뢰성과 안정성이 확보될 수 있도록 구성하고자 한다. Query 수행을 여러 서버로 분산처리하게 함으로써 성능에 대한 신뢰성을 향상 시킬 수 있는 Load Balancing System을 제안한다.할 때 가장 효과적인 라우팅 프로토콜이라고 할 수 있다.iRNA 상의 의존관계를 분석할 수 있었다.수안보 등 지역에서 나타난다 이러한 이상대 주변에는 대개 온천이 발달되어 있었거나 새로 개발되어 있는 곳이다. 온천에 이용하고 있는 시추공의 자료는 배제하였으나 온천이응으로 직접적으로 영향을 받지 않은 시추공의 자료는 사용하였다 이러한 온천 주변 지역이라 하더라도 실제는 온천의 pumping 으로 인한 대류현상으로 주변 일대의 온도를 올려놓았기 때문에 비교적 높은 지열류량 값을 보인다. 한편 한반도 남동부 일대는 이번 추가된 자료에 의해 새로운 지열류량 분포 변화가 나타났다 강원 북부 오색온천지역 부근에서 높은 지열류량 분포를 보이며 또한 우리나라 대단층 중의 하나인 양산단층과 같은 방향으로 발달한 밀양단층, 모량단층, 동래단층 등 주변부로 NNE-SSW 방향의 지열류량 이상대가 발달한다. 이것으로 볼 때 지열류량은 지질구조와 무관하지 않음을 파악할 수 있다. 특히 이러한 단층대 주변은 지열수의 순환이 깊은 심도까지 가능하므로 이러한 대류현상으로 지표부근까지 높은 지온 전달이 되어 나타나는 것으로 판단된다.의 안정된 방사성표지효율을 보였다. $^{99m}Tc$-transferrin을 이용한 감염영상을 성공적으로 얻을 수 있었으며, $^{67}Ga$-citrate 영상과 비교하여 더 빠른 시간 안에 우수한 영상을 얻을 수 있었다. 그러므로 $^{99m}Tc$-transierrin이 감염 병소의 영상진단에 사용될 수

• Journal of Korea Multimedia Society
• /
• v.15 no.11
• /
• pp.1369-1376
• /
• 2012

In this paper, we propose 2D industrial image registration method for the detection of defects. Proposed method performs preprocessing to smooth the original image with the preservation of the edge for the robust registration against general noise. Then, x-direction gradient magnitude image and corresponding binary image are generated. Density analysis around neighborhood regions per pixel are performed to generate feature image for preventing mis-registration due to moire-like patterns, which frequently happen in industrial images. Finally, 2D image registration based on phase correlation between feature images is performed to calculate translational parameters to align two images rapidly and optimally. Experimental results showed that the registration accuracy of proposed method for the real industrial images was 100% and our method was about twenty times faster than the previous method. Our fast and accurate method could be used for the real industrial applications.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.78-78
• /
• 2017

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.3
• /
• pp.226-232
• /
• 2014

In the present study, the characteristics of laser ultrasound in the ablation regime are investigated using simulations and experiments. The laser ultrasonic technique has been recognized as a noncontact method in the field of nondestructive tests (NDTs). In hostile environments (such as hot temperatures), this method has various advantages over the conventional contact ultrasonic method. In particular, in the ablation regime, the laser ultrasonic technique is suitable for inspecting internal defects because of the high amplitude and directivity of the longitudinal wave. In this paper, a simulation model for laser ultrasound in the ablation regime was developed. This model was subsequently applied to a defective specimen using the B-scan method to locate defects. Finally, we performed an experimental test to verify the simulation results. Consequently, the simulation demonstrated good agreement with the experimental test.

• Smart Media Journal
• /
• v.11 no.11
• /
• pp.92-98
• /
• 2022

Identifying defects in textiles is a key procedure for quality control. This study attempted to create a model that detects defects by analyzing the images of the fabrics. The models used in the study were deep learning-based VGGNet and ResNet, and the defect detection performance of the two models was compared and evaluated. The accuracy of the VGGNet and the ResNet model was 0.859 and 0.893, respectively, which showed the higher accuracy of the ResNet. In addition, the region of attention of the model was derived by using the Grad-CAM algorithm, an eXplainable Artificial Intelligence (XAI) technique, to find out the location of the region that the deep learning model recognized as a defect in the fabric image. As a result, it was confirmed that the region recognized by the deep learning model as a defect in the fabric was actually defective even with the naked eyes. The results of this study are expected to reduce the time and cost incurred in the fabric production process by utilizing deep learning-based artificial intelligence in the defect detection of the textile industry.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.6
• /
• pp.773-784
• /
• 2023

Since 2007, the government has been actively working to enhance the quality of public buildings, as evidenced by initiatives like the "National Basic Architecture Plan" and, since 2014, the "Building Service Industry Promotion Act." Despite these efforts, educational facilities continue to experience more frequent defects compared to large-scale apartment constructions. This study aims to analyze the primary causes of crack formation in educational facilities, employing the 2×2 MATRIX and IPA techniques to develop efficient crack prediction models. The research includes a review of relevant literature and an analysis of data from the Office of Education spanning 2019 to 2021 to pinpoint significant defects. Subsequently, 15 factors related to crack defects were identified through surveys and expert consultations. The 2×2 Matrix analysis of these factors highlighted the challenges in work processes and the effectiveness of preventative measures for crack formation, focusing on key areas for improvement. The findings from this study are anticipated to significantly contribute to the prevention and management of structural cracks in educational facilities, ensuring their long-term integrity.