• Korean Journal of Remote Sensing
• /
• v.27 no.5
• /
• pp.613-623
• /
• 2011

This study assessed the feasibility to apply Two-band and Three-band reflectance models for chlorophyll-a estimation in turbid productive waters whose scale is smaller and narrower than ocean using a high spatial resolution image. Those band ratio models were successfully applied to analyzing chlorophyll-a concentrations of ocean or coastal water using Moderate Imaging Spectroradiometer(MODIS), Sea-viewing Wide Field-fo-view Sensor(SeaWiFS), Medium Resolution Imaging Spectrometer(MERIS), etc. Two-band and Three-band models based on band ratio such as Red and NIR band were generally used for the Chl-a in turbid waters. Two-band modes using Red and NIR bands of RapidEye image showed no significant results with $R^2$ 0.38. To enhance a band ratio between absorption and reflection peak, We used red-edge band(710 nm) of RapidEye image for Twoband and Three-band models. Red-RE Two-band and Red-RE-NIR Three-band reflectance model (with cubic equation) for the RapidEye image provided significance performances with $R^2$ 0.66 and 0.73, respectively. Their performance showed the 'Approximate Prediction' with RPD, 1.39 and 1.29 and RMSE, 24.8, 22.4, respectively. Another three-band model with quadratic equation showed similar performances to Red-RE two-band model. The findings in this study demonstrated that Two-band and Three-band reflectance models using a red-edge band can approximately estimate chlorophyll-a concentrations in a turbid river water using high-resolution satellite image. In the distribution map of estimated Chl-a concentrations, three-band model with cubic equation showed lower values than twoband model. In the further works, quantification and correction of spectral interferences caused by suspended sediments and colored dissolved organic matters will improve the accuracy of chlorophyll-a estimation in turbid waters.

• Journal of Science of Art and Design
• /
• v.5
• /
• pp.175-216
• /
• 2003

시각이 아닌 오감체계에 관계하는 때문에 현대미술은 외관만으로 이루어지지 않는다. 곧 예술 작품들은 하나의 장소를 관객에게 제공하여, 심리적, 물리적, 또는 예술이 존재여부에 관한 갖가지 질문들을 제기한다. 모든 예술 작품은 메시지를 담고 있다. 이러한 관점에서 개념 또는 아이디어에 우선하는 현대미술은 그들의 메시지를 전달하기 위해 우리의 사회적 배경과 보편성을 간과할 수 없다. 우리의 물체 인식은 결국 우리의 경험체계를 통해서 이루어진다고 간주하면, 현대미술의 새로운 형태는 보편적 특질들이 그 특질들 이상의 상태로 보여지도록 유도한다. 이러한 창조 행위의 시작은 현대인간의 문화 읽기이며 문화는 인간과 자연의 긴밀한 관계 속에서 이루어진다. 역사는 지나간 시간을 기록한 것이며, 이 또한 우리의 지식과 정보 체계에 속한다. 회화가 평면에 입체감을 표현하는 것과는 달리 조각은 자연 속, 즉 실재공간 속에 있는 모든 것을 표현하기 때문에 시각(visible) 이외에도 촉각(tangible)이 관여하게 된다. 조각의 특수성은 촉각(tangible)이 우선하는 것이다. 그러나 시각과 촉각은 매우 적극적으로 미학적 경험에 참여하는 감각으로 이들을 서로 분리하여 생각하기가 무척 힘들다. 왜냐하면 어떤 경험에 있어서 기억연합 또는 감각 연합에 의해 하나의 감각이 다른 여러 감각을 촉발하여 연쇄반응 혹은 '형태 Gestalt'를 이루기 때문이다. 대부분의 근대 조각 작품들은 조각대 위에 고정되어 있는 구상 형태를 지녔기 때문에 조각작품 자체가 지닌 외적 형태와 그 자체내의 공간이 더욱 중요한 역할을 하게 된다. 말하자면 미로의 비너스 조각은 대리석과 비너스 형태의 결합이다. 때문에 관객은 그 주변을 돌면서 우리 신체의 내적 공간과 시각에 의존하면서 그 작품의 중량감, 양감, 형태 등의 특질과 만나게 된다. 그러나 현대 추상조각과 개념조각은 이보다 좀 더 확장된 공간을 제시한다. 이것은 현대조각이 건축개념을 수용한 때문이며, 그것이 때로는 안 쪽에서 때로는 바깥 쪽에서 그 형태를 결정하며, 보고 듣고 느끼고 만져지고 왕래하는 등의 인식 영역인 관객의 오감체계에 직접적으로 관계하기 때문이다. 우리는 건축 공간에서, 시각 외에도 청각이나 촉각을 통해 지각한다. 대강 요약하자면 공간은 객관적 상태이기보다는 인식영역의 주관성을 통해 받아들여진 우리가 지나쳐온 것들이나 체험된 공간이다. 여기서 '받아들여지는' 일은 과거 경험들의 주체들, 언어와 문화에 의해서 이루어져야 한다. 건물, 즉 둘러싸고 있는 공간은 중앙이 아니다. 중앙은 바로 나, 둘러싸여진 나이다 나는 나의 동작에 따라 그 공간의 시스템을 변화시킬 수 있는 유동적인 중심이다 (이때의 나는 위치의 축을 변화시키는 것이 아니라, 그들을 탐색하는 것이다). 작품이 대형화되면서 이러한 건축공간개념이 현대 조각가들의 작품개념에 이용되었다고 본다. 현대미술에서 In situ작업과 특정한 장소를 위한 기획되어진 최근의 프로젝트 작업들은 대형화되어있으며, 건축에서처럼 특정한 장소를 만들어낸다. 로잘린드 크라우스(Rosalind Krauss)는 또한 '조각영역의 확장 (La sculpture dans le champ elargi)'에서 현대조각이 건축과 환경의 영역을 침범하고 있음을 지적한다. 그녀에 의하면, 1960년대 이후의 현대조각은 이러한 탈 귀속성과 조각의 자율성을 획득함으로써 조각은 건축물이 아니면서 건축물 주변에 위치하거나 풍경이 아니면서 풍경 안에 자리잡게 되었다. 이와 같이 현대의 대형조각 작품들 - 예를 들어 대형화된 미니별 조각이나 개념미술, 또는 대지예술 등 -은 풍경의 실재가 아니기 때문에 환경으로부터 구분된다고 언급하고 있다. 이들 조각은 더 이상 만져지는 실체이거나 점유하는 공간의 상징언어를 지닌 조각의 범주에 한정되지 않게 된다. 조각과 건축의 공간인식을 인체의 크기와 관련하여 보면, 메를로 퐁티(Merleau-Ponty)의 '지각의 현상학' 은 우리가 논하는 작품의 공간체계를 분석하는데 지침표가 되어준다. 메를로 퐁티가 말하는 지각은 정신에 의해서만 이루어지는 것이 아니며, 몸과 함께 이루어지는 현상이다. 지각은 우리가 부단히 눈을 움직이고 만지고 냄새를 맡고 주변을 돌아 다니면서 세계와의 직접적인 접촉을 통해 이루어 진다. 몸의 움직임을 통하여 나타나는 신체적 표현은 몸 자체가 원천적으로 지향적 활동의 주체로서 파악되는 한 이미 항상(恒常, constant) 의미 현상을 지니다. 우리의 지각이 움직이는 몸의 지향 활동을 통해 이루어진다는 것은 우리의 몸의 지향활동이 의식에 선행함을 의미한다. 몸의 움직임은 의식의 의도를 표현할 때에만 의미를 나타내는 기호가 되는 것이 아니라, 이미 그 자체가 살아있는 표현이다. 우리의 몸짓, 표정은 우리 의식이 의도하기 전에 이미 의미가 담겨있다. 몸은 그 자체가 기호(Signe)적이다. 결국. 메를로 퐁티에게서 세상(le monde entier)은 그 자신이 주체가 되어 인식한다, 그리고 이 인식 구조에는 우리의 몸이 구심점(le point centripete)이 된다. 만약 우리가 이러한 메를로 퐁티의 개념을 염두에 둔다면, 예술작품의 특성에 매우 중요한 역할을 하고 있는 재료와 크기를 이해할 수 있을 것이다.

• Journal of Korea Water Resources Association
• /
• v.34 no.6
• /
• pp.659-672
• /
• 2001

Generally, design flood for a hydraulic structure is estimated using statistical analysis of runoff data. However, due to the lack of runoff data, it is difficult that the statistical method is applied for estimation of design flood. In this case, the synthetic unit hydrograph method is used generally and the models such as NYMO method, Snyder method, SCS method, and HYMO method have been widely used in Korea. In this study, these methods and KICT method, which is developed in year 2000, are compared and analyzed in 10 study areas. Firstly, peak flow and peak time of representative unit hydrograph and synthetic unit hydrograph in study area are compared, and secondly, the shape of unit hydrograph is compared using a root mean square error(RMSE). In Nakayasu method developed in Japan, synthetic unit hydrograph is very different from peak flow, peak time, and the shape of representative unit hydrograph, and KICT method(2000) is superior to others. Also, KICT method(2000) is superior to others in the aspects of using hydrologic and topographical data. Therefore, Nakayasu method is not a proper in hydrological practice. Moreover, it is considered that KICT model is a better method for the estimation of design flood. However, if other model, i.e. SCS method, Nakayasu method, and HYMO method, is used, parameters or regression equations must be adjusted by analysis of real data in Korea.

• Journal of the Korean earth science society
• /
• v.39 no.3
• /
• pp.228-240
• /
• 2018

Solar energy is calculated using meteorological (14 station), ceilometer (2 station) and microwave radiometer (MWR, 7 station)) data observed from the Weather Information Service Engine (WISE) on the Seoul metropolitan area. The cloud optical thickness and the cloud fraction are calculated using the back-scattering coefficient (BSC) of the ceilometer and liquid water path of the MWR. The solar energy on the surface is calculated using solar radiation model with cloud fraction from the ceilometer and the MWR. The estimated solar energy is underestimated compared to observations both at Jungnang and Gwanghwamun stations. In linear regression analysis, the slope is less than 0.8 and the bias is negative which is less than $-20W/m^2$. The estimated solar energy using MWR is more improved (i.e., deterministic coefficient (average $R^2=0.8$) and Root Mean Square Error (average $RMSE=110W/m^2$)) than when using ceilometer. The monthly cloud fraction and solar energy calculated by ceilometer is greater than 0.09 and lower than $50W/m^2$ compared to MWR. While there is a difference depending on the locations, RMSE of estimated solar radiation is large over $50W/m^2$ in July and September compared to other months. As a result, the estimation of a daily accumulated solar radiation shows the highest correlation at Gwanghwamun ($R^2=0.80$, RMSE=2.87 MJ/day) station and the lowest correlation at Gooro ($R^2=0.63$, RMSE=4.77 MJ/day) station.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.1
• /
• pp.11-18
• /
• 2004

The eruption of permanent teeth represents the movement in the alveolar bone before appearance in oral cavity, to the occlusal plane after appearance in oral cavity, and additive movement after reaching th the occlusal plane. Tooth eruption is mostly controlled by genetic signals. The eruption stage is divided to preeruptive alveolar stage, alveolar bone stage, mucosal stage according to the process of growth and development. If the disturbance is occured in any stage of eruption, tooth does not erupt. The cause of eruption disturbance are ectopic position of the tooth germ, obstruction of the eruption path and defects in the follicle or PDL. In the treatment of eruption disturbance, surgical procedures are commonly used. There are three kind of surgical procedure ; surgical exposure, surgical repositioning, surgical exposure and traction Surgical exposure is basic procedure. This involves removal of mucosa, bone, lesion that are surrounding the teeth, dental sac when necessary to maintain a patent channel between the crown and the normal eruptive path into the oral cavity. To ensure this patency, many techniques including cementation of a celluloid crown, packing with gutta-percha or zinc oxide-eugenol, or a surgical pack, are used. When surgical exposure is conducted, operators should not expose any part of cervical root cement and not injure periodontium or root of adjunct tooth. After surgical exposure, tooth should be surrounded by keratinized gingiva. There is direct relationship between the extent of development of pathophysiologic aberrations and the intensity of the manipulative injury inflicted on the tooth by surgical treatment, so operator should consider this thing. In these cases, surgical exposure is conducted on Maxillary 1st milars that have a eruption disturbance and improve the eruption disturbance effectively.

• Journal of agricultural medicine and community health
• /
• v.34 no.1
• /
• pp.13-23
• /
• 2009

Objective: The objective of this study was to evaluate the association of social support with health status and health behavior. Methods:　This study was conducted with 79 elderly people in Gunja-ri, Dongsan-myun, Chuncheon. We performed face to face interview which was composed of socio-demographic characteristics, social support, health status and health behavior. The association between social support and result variables was analysed by Chi-square test and logistic regression. We used SAS ver9.1 for statistic analysis. Results: Mean age of the study population was 72.0$\pm$7.0, social support score was 14.3$\pm$4.7 with full marks of 20 and 36.25% of the total population were shown to have depression. When the social support score was changed, depression (p=0.0007) and physical exercise (p=0.0312) showed significant difference. The self-rated health status was significantly related to the relationship with family members (OR=0.25, 95% CI=0.07-0.95) and the quality of sleep was also significantly associated to the relationship with family members (OR=0.21, 95% CI=0.06-0.73). The physical exercise was done significantly less in the group without close friends than in the group with many close friends (OR=0.21, 95% CI=0.05-0.94) and the depression was significantly more in the group without community participation than in the group with community participation (OR=4.79, 95% CI=1.62-14.15). Conclusions: Through this study, we could conclude that the social support factors are associated with health status and health behavior. Therefore, to improve the health status of rural elderly, we need to approach to develop social support.

• KDI Journal of Economic Policy
• /
• v.13 no.2
• /
• pp.41-67
• /
• 1991

Local autonomy of Korea's lower-level local council has been reinstated following elections last March for the first time in thirty years. Last June, we had elections for the upper-level local council. Mayors, governors, and administrative chiefs of cities, provinces and other local government bodies are slated for elections in the first half of next year. The impacts of local autonomy are taking effect in not only the political sphere, but also the administrative and economic spheres. In fact, it seems that some modification of all economic policy making and administration is inevitable. Since the initiation of local autonomy, in order to make the economy work more efficiently, it has become quite important to examine the impact of local autonomy on the national economy. The areas of local autonomy include independent legislative power, administrative power, organizational power, and most important of all, the independent public financial power of the local governments. The purpose of this paper is to examine the effects of local autonomy on the national economy and ways of enhancing the role of local public finance to facilitate settlement and development of the local autonomy system. Local autonomy will contribute to the continuous growth of our economy, allow balanced development, and generate greater efficiency. However, local autonomy can also incur economic costs causing at times short-term price instability, inefficient resource allocation, through tax competition and tax exporting, and insolvency of local government due to abusive fiscal operation. To reduce these side effects, different alternatives must be considered. Local autonomy systems generally provide more efficient resource allocation than centralization. But in the model used in Chapter 3 of this paper, the relative efficiencies of both local autonomy and centralization are determined by comparing the elasticity of substitution between national public goods and local public goods. If the elasticity of substitution is bigger than one, centralization provides a more efficient resource allocation. The development of local autonomy could be attained through democratization of the local public finance system including the following three propositions. I) The independence of public financial power of local governments should be established over central government. Furthermore, a democratically operated scheme of intergovernmental fiscal coordination is especially necessary. 2) In the operation of local finance, direct democracy is needed to induce the voluntary participation of local residents. The residents can take part in planning both the local budget and the development of the community. To attain this goal, all the results of local finance operations should be made public. 3) Among economic ill-effects of the local autonomy system, the most serious one is the possibility of insolvency of local governments. Therefore, measures to limit abusive spending by the local governments should be introduced, such as the fiscal restraints system adopted in the United States.

• Journal of Genetic Medicine
• /
• v.5 no.1
• /
• pp.15-20
• /
• 2008

Purpose : Large exon deletions in the DMD gene are found in about 60% of DMD/BMD patients. Multiplex PCR has been employed to detect the deletion mutation, which frequently generates noise PCR products due to the presence of multiple primers in a single reaction as well as the stringency of PCR conditions. This often leads to a false-negative or false-positive result. To address this problematic issue, we introduced the dual primer oligonucleotide (DPO) system. DPO contains two separate priming regions joined by a polydeoxyinosine linker that results in high PCR specificity even under suboptimal PCR conditions. Methods : We tested 50 healthy male controls, 50 patients with deletion mutation as deletion-positive patient controls, and 20 patients with no deletions as deletion-negative patient controls using DPO-multiplex PCR. Both the presence and extent of deletion were verified by simplex PCR spanning the promoter region (PM) and 18 exons including exons 3, 4, 6, 8, 12, 13, 17, 19, 43-48, 50-52, and 60 in all 120 controls. Results : DPO-multiplex PCR showed 100% sensitivity and specificity for the detection a deletion. However, it showed 97.1% sensitivity and 100% specificity for determining the extent of deletions. Conclusion : The DPO-multiplex PCR method is a useful molecular test to detect large deletions of DMD for the diagnosis of patients with DMD/BMD because it is easy to perform, fast, and cost-effective and has excellent sensitivity and specificity.

• Clinical and Experimental Pediatrics
• /
• v.49 no.3
• /
• pp.251-257
• /
• 2006

Purpose : In this study, we created a questionnaire and collected answers concerning actual conditions of vaccination and parents' knowledge of vaccination issues, in order to find false knowledge of patients. We tried to give correct information and suggested the role of the pediatrician. Methods : We made questionnaires and collected answers from 466 parents from March 2004 to June 2004. Results : Places of vaccination were pediatric clinics(49.4 percent), health centers(27.7 percent), general/university hospitals(15.0 percent) and other clinics(4.9 percent). We found 38.8 percent of parents thought that the reason for vaccination at pediatric clinics was a belief of speciality, even though there is no difference in the vaccination itself. We also found 15.0 percent of parents thought that there were no differences between pediatricians and other physicians, but 52.0 percent of parents wanted to receive vaccination at pediatric clinics in the future. Our study also found that 62.4 percent of parents wanted to make out a preliminary questionnaire for vaccination. Many parents got vaccination information from vaccination record books(57.9 percent), and 52.6 percent of parents incorrectly believed that Hib vaccination could prevent all kinds of meningitis. Conclusion : Our study suggests that pediatricians need to make efforts to give out correct information. It is necessary to use preliminary questionnaires for vaccination and correct vaccination information should be written on the vaccination record book. Also, there needs to be counselling with parents about weaning, growth and development at the time of vaccination, and to point out the differences between pediatricians and other physicians.

• Archives of design research
• /
• v.17 no.4
• /
• pp.241-250
• /
• 2004

In this research, the copper alloy plates C2200, C5210, C7701, C8113 were selected to make datum and to identify further usage of metal craft experimentation. For its experimentation, the general welding and TIG welding methods were researched; for 2nd experimentation, the Reticulation and Electroforming skill's differences in color and temperature were researched. With these methods 3 different kinds of works are introduced for sample studies. For this research, Dr. Lee, Dong-Woo who works in Poongsan Metal Co, supported 4 kinds of copper alloy metals. Which are Commercial bronze (Cu-Zn), Deoxidiged Copper(Cu-Sn-P), Nickel Silver (Cu-Ni-Zn), and White Bronze (Cu-Ni); they were applied partly and wholly by the method of Laminatin, Reticulation, Fusing, and Electroforming skills. In case of C2200, the brass, the A. C. TIG welding method is better under 2mm slight plate; the D.C. TIG welding is better upper 2mm plate; and 250~300$^{\circ}C$ is recommended for remain heat treatment. In case of C5210, not having Hydrogen in high temperature return period, doesn't need Oxygen in high temperature and hardening in comparative high temperature neither, it is good for welding. It contains Sn 2-9% ad P 0.03-0.4% generally; and in accordance with the growth rate of Sn contain amount, the harden temperature boundary become broad. In case of cold moment after welding, they are recommended that higher speed TIG welding, smaller melting site and less than 200$^{\circ}C$ for pre-heating temperature. In case of C7701, the 10-20% Ni, 15-30% Zn are widely used.. If it is upper 30% Zn, it become (${\alpha}+{\beta}$) system and adhesive power rate become lower, and the productivity become lower in low temperature but the productivity become higher in high temperature. Nickel Silver's resistance of electricity is well; and the heatproof and incorrodibility is good, too. Lastly, in case of C8113, good at persistence in salty and grind; high in strength of high temperature. In case of white brass, contain 10-30% Nickel and hardened in high temperature and become single phrase. For these reason, the crystallization particles easily become large, if the resistance become higher small amount of Pb, P, S separation rate become higher.