• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.183-202
• /
• 2019

For design and performance assessment of a high-level radioactive waste (HLW) disposal system, it is necessary to understand the characteristics of coupled thermo-hydro-mechanical (THM) behavior. However, in previous studies for the Korean Reference HLW Disposal System (KRS), thermal analysis was performed to determine the spacing of disposal tunnels and interval of disposition holes without consideration of the coupled THM behavior. Therefore, in this study, TOUGH2-MP/FLAC3D is used to conduct THM modeling for performance assessment of the Korean Reference HLW Disposal System (KRS). The peak temperature remains below the temperature limit of $100^{\circ}C$ for the whole period. A rapid rise of temperature caused by decay heat occurs in the early years, and then temperature begins to decrease as decay heat from the waste decreases. The peak temperature at the bentonite buffer is around $96.2^{\circ}C$ after about 3 years, and peak temperature at the rockmass is $68.2^{\circ}C$ after about 17 years. Saturation of the bentonite block near the canister decreases in the early stage, because water evaporation occurs owing to temperature increase. Then, saturation of the bentonite buffer and backfill increases because of water intake from the rockmass, and bentonite buffer and backfill are fully saturated after about 266 years. The stress is calculated to investigate the effect of thermal stress and swelling pressure on the mechanical behavior of the rockmass. The calculated stress is compared to a spalling criterion and the Mohr-Coulumb criterion for investigation of potential failure. The stress at the rockmass remains below the spalling strength and Mohr-Coulumb criterion for the whole period. The methodology of using the TOUGH2-MP/FLAC3D simulator can be applied to predict the long-term behavior of the KRS under various conditions; these methods will be useful for the design and performance assessment of alternative concepts such as multi-layer and multi-canister concepts for geological spent fuel repositories.

• Journal of Christian Education in Korea
• /
• v.66
• /
• pp.75-112
• /
• 2021

This study is purposed to prepare students in theological universities so that they contribute to their faith community as well as the broader social community in future through developing a practical course model for education of character formation. Facing the challenge of a high-tech revolution being progressed globally in this period, theological seminaries as the Christian-affiliated institute of higher education see the necessity to nurture their learners' competency of holistic personality comprehending cognitive, affective, behavioral, and more spiritual maturity as well as specialty in each subject matter. The holistic character capability of seminarians is closely related not only to their own self-realization, but also social community's well-being. This research had the following content and results. Chapter 1 brought up a subject to educational needs of the holistic character formation in the theological seminaries to meet the rapidly changing times. Chapter 2 considered the importance of character formation in the curriculum of the universities and theological seminaries in the times of high-tech revolution through the literature reviews related to. Chapter 3 clarified the elements of character education to be placed emphasis on theological seminaries and established the way of course planning. Chapter 4, using a course of Christian social education for illustration, described in order the whole process of course planning comprehending the need of planning, description of course concept, establishment and definition of learning outcomes, organization of learning experience(course content), teaching-learning activities, evaluation of learning outcome, and course improvement, which was visualized with the chart of the process of course design. Also, it provided a practical illustration of the conceptual map, an outline of content and an organization of units, and scope-sequence chart. Finally, chapter 5 gave an syllabus example in an integrative and digestive form as the course plan to be distributed to the students, which is the final result produced through the whole process of course planning. This research is intended not to present a overall curriculum planning of the university-level in the theological seminaries, but to develop a course-level curriculum focused on the formation of character. The author hope that this study would be used as a guideline in developing a course model to nurture the capability of the learners' holistic character.

• Journal of KIISE:Information Networking
• /
• v.31 no.6
• /
• pp.673-684
• /
• 2004

As the wireless mobile communication is being widespread, mobile technologies will have important roles in the communication with the explosive growth of demanding for wireless portable devices. Among the mobile technologies, a great deal of interest has been taken in mobile ad hoc network (MANET), which is a collection of wireless mobile nodes forming a temporary network without the aid of stationary infrastructure in recent. Furthermore, considering characteristic of ad hoc networks, the design of efficient routing protocols is an important issue. In recent years, on-demand protocols among routing protocols have noticed because of the low routing overhead. However, on-demand protocols suffer from production of the enormous query Packets by broadcasting in order to setup routes, that is, a flooding scheme. The flooding scheme is very costly and results in serious problem, which we refer as the broadcast storm problem. In this paper, we propose a Dynamic Adaptation Query flooding Using Neighbor Topology (NT-DAQ) scheme, in order to resolve the broadcast storm Problem. When a route discovery is in progress, each mobile node decides on the basis of neighbor topology information whether discovery process participates or not. Therefore, our proposed scheme enables to improve network performance in which minimize the number of query rackets. We evaluate the efficiency of our proposed scheme through simulation.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.10c
• /
• pp.202-204
• /
• 2001

가상 세계의 공유 개념은, 특히 사용자들이 인터넷 같이 대규모 네트웍을 통해 지역적으로 분산된 경우는 복제가 수용할 수 있는 상호작용 성능을 제공하기 때문에 각 사용자의 사이트에 정보를 복제함으로써 확장된다. 그러나, 다수의 동시 갱신은 replicas간의 일관되지 않은 뷰를 일으키게 될 것이다. 따라서, 동시성 제어가 복제자들간에 일관된 상태를 유지하도록 하기 위한 중요한 요소가 된다. 우리는 단지 대상 객체의 주변에 있는 사용자들만이 소유권 요청을 다중 전송하게 하는 확장성 있는 예측기반 동시성 제어 스킴을 제안했었다. 이 작업에서, 우리는 모든 사용자들이 동일한 속도론 가지고 가상 세계를 이동한다고 가정했다. 이것은, 그러나, 좀더 사실성을 더하기 위해 사용자가 가상 세계와 상호작용을 할 매 그들의 이동속도를 변경하도록 하는 네트웍 게임같은 네트웍 가상 환경에서는 너무 common 하다. 본 논문은 다양한 속도를 가진 사자를 지원하기 위한 확장을 제안한다. 확장된 스킴은 다른 속도의 수만큼의 다중 Entity Radii를 가지며 각 속도를 가진 사용자에게 분리된 큐를 할당한다. 각 큐는 다음 소유자 후보를 예측하기 위해 동시에 예측을 수행하고 선택된 후보들간에서 최소의 Predicted Collision Time을 가지는 최종 후보자가 선택된다. 이는 사용자의 속도에 기반을 둔 적절한 Entity Radius를 사용함으로써 소유권의 timely advanced transfer과, 다른 이돔 속도와 latency를 가지는 사용자들 간의 간섭을 줄임으로써 공정(공평)한 소유권 양도, 그리고 불필요한 소유권 전송을 줄임으로써 놓은 예측 정확도를 제공한다.성을 지닌 AMMQL 학습법은 로봇축구와 같이 끊임없이 실시간적으로 변화가 일어나는 다중 에이전트 환경에서 특히 높은 효과를 볼 수 있다. 본 논문에서는 AMMQL 학습방법의 개념을 소개하고, 로봇축구 에이전트의 동적 위치 결정을 위한 학습에 어떻게 이 학습방법을 적용할 수 있는지 세부 설계를 제시한다.다.으로서 hemicellulose구조가 polyuronic acid의 형태인 것으로 사료된다. 추출획분의 구성단당은 여러 곡물연구의 보고와 유사하게 glucose, arabinose, xylose 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.123-130
• /
• 2006

Recently, Korean government promotes BTL(Build-Transfer-Lease) for their public construction project to apply private sector's experience and finance initiatives. Many of public buildings and civil infrastructure projects were planned to be delivered by BTL and it helps to continue public projects under tight budget conditions. Since the characteristics of BTL projects, creative ideas for the project function, performance and its LCC (Life Cycle Cost) become more important than usual public work project. This paper introduces the systematic "VE job Plan" application techniques for BTL project and shows the process. This study shows the application of "VE job Plan" for BTL project to help decision making and value improvement. Also, Project cost was estimated by LCC (Life Cycle Cost) analysis. Technical "FAST diagram"was developed and used to find major functions of the project. So, it helps to improve performance of functions and make creative ideas. FAST diagram also help to find relationships between functions and cost. A case study (Daegu Art Gallery BTL Project) was conducted using proposed "VE job Plan. Study demonstrates how value management helps save money and increase functional performance. Researcher found that project can save cost and improve performance of functions significantly by using appropriate VE analysis process at appropriate time.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.251-258
• /
• 1998

The purpose of this study is to develop the District-level Planning Support System (DPSS) by using GIS. The district-level planning which is related for district-level control of city, needs the various parcel-level information which is composing the urban physical environment. The information has to be stored and analyzed for recognizing the study area, then the district-level planning will be efficiently managed. The use of GIS in the process of district-level planning is restricted for the creation of thematic map. GIS is not used for the analysis of spatial patterns and planning process. This study evaluates the characteristics of current district-level planning and the basic components of urban physical environment. And the database model is built. The topology among components is defined by using the spatial relationship. Then the spatial query machine for district-level planing is developed by using ArcView 3.1, Avenue and Dialog Extension. This spatial query machine is applied for case study. This study shows 1) the possibility of the district-level planning support system for analyzing spatial relationship, 2) the needs of the up-to-date topographic map showing current building's footlines and the complete integration with cadastral maps, it will reduce the uncertainty in the spatial decision making process, 3) the methodology for the construction of spatial decision making rules, 4) the further study for the using of raster, network, image and three dimension data.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.106-112
• /
• 2017

This paper presents a mathematical model derived from the upper-bound theorem of concrete plasticity to rationally evaluate the shear friction strength of concrete interfaces with a construction joint. The upper limit of the shear friction strength was formulated from the limit state of concrete crushing failure on the strut-and-tie action along the construction joints to avoid overestimating the shear transfer capacity of a transverse reinforcement with a high clamping force. The present model approach proposed that the cohesion and coefficient of friction of concrete can be set to be $0.27(f_{ck})^{0.65}$ and 0.95, respectively, for rough construction joints and $0.11(f_{ck})^{0.65}$ and 0.64, respectively, for smooth ones, where $f_{ck}$ is the compressive strength of concrete. From the comparisons with 155 data compiled from the available literature, the proposed model gave lower values of standard deviation and coefficient of variation of the ratios between predictions and experiments than AASHTO and fib 2010 equations, indicating that the proposed model has consistent trends with test results, unlike the significant underestimation results of such code equations in evaluating the shear friction strength.

• Korean Business Review
• /
• v.18 no.1
• /
• pp.81-108
• /
• 2005

Recent market environment shows a new relationship between customer and company, which you could not observe in the past. Customers now are used to various benefits through the participation of marketing process. It is no wonder that customers visit company web site, gather a lot of information about the product on the website, and express their satisfaction and opinions about the product. Furthermore, these activities are being made ubiquitously. Despite the fact there are a lot of customer participation in the Internet environment, Customers Participation has been given little attention in the academic literature. This study explores the effect of the properties of Internet infra on customers participation. The implications of this study are as follows. First, by reviewing the literature on the performance and process of customers participation in the marketing activities, this study identifies why customers did not participate in the marketing activities under non-Internet environment. Second, this study identifies the properties of Internet infra influencing customers informative participation. Third, we suggest some managerial strategies for enhancing the performance of a company by customer participation. Consequently, we suggest managerial implications for completely different marketing strategies in response to customers participation in the marketing activities under the digital environment.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.8
• /
• pp.721-728
• /
• 2017

High-grade gray cast iron (HCI350) was prepared by adding Cr, Mo and Cu to the gray cast iron (GC300). Their microstructure, mechanical properties and fatigue strength were studied. Cast iron was made from round bar and plate-type castings, and was cut and polished to measure the percentage of each microstructure. The size of flake graphite decreased due to additives, while the structure of high density pearlite increased in volume percentage improving the tensile strength and fatigue strength. Based on the fatigue life data obtained from the fatigue test results, the probability - stress - life (P-S-N) curve was calculated using the 2-parameter Weibull distribution to which the maximum likelihood method was applied. The P-S-N curve showed that the fatigue strength of HCI350 was significantly improved and the dispersion of life data was lower than that of GC300. However, the fatigue life according to fatigue stress alleviation increased further. Data for reliability life design was presented by quantitatively showing the allowable stress value for the required life cycle number using the calculated P-S-N curve.

• 대한공업교육학회지
• /
• v.44 no.1
• /
• pp.209-231
• /
• 2019

The purpose of this study was to extract the factors of core competency required for technology teachers and to analyze the educational needs for extracted core competency factors and to search for the application of core competencies in the in-service technology teachers education. This study was conducted by literature review, expert validation, and needs assessment method. The survey was conducted by 92 low-carrier technology teachers who participated in in-service technology teachers education for upgrading to first grade teacher certificate. Data were analyzed the factor analysis, needs assessment, and IPA analysis using SPSS 24. The core competencies with high education needs were selected by the score of the Borich formula and the IPA analysis. As a result of the study, 29 factors of core competencies were chosen as the priority: challenge, planning ability, decision making ability, future orientation, intellectual property utilization ability, communication ability, and creative thinking etc. Based on the conclusions of this study, I would suggest the following. It is to create a new in-service education program reflected on core competencies that have high educational needs of low-carrier technology teachers. In addition, a strategy that reflects core competencies methodically in existing in-service teachers education program is needed. Future research should be followed by research on curriculum design to enhance high needed core competencies of low-carrier technology teachers.