• Economic and Environmental Geology
• /
• v.51 no.1
• /
• pp.39-48
• /
• 2018

We carried out the standoff compensation data from 2007 to 2011 into four different density borehole models to find out the most effectiveness of standoff compensation charts. First, we investigated the irregular collapse characteristics of gamma ray and cut the non-ideal gamma response to improve the effectiveness of the standoff compensation error data. Effectiveness of detector combinations, density of borehole, and spine and ribs techniques from the modified standoff compensation data was analyzed. As the result of comparison, LSD-MSD combination has been suitable for standoff compensation more than LSD-SSD combination and it is possible to do standoff compensation for soil or weathered zone under groundwater level without fatal errors. Even though error scales of density transformed spine and ribs techniques were generally large compared to the conventional standoff compensation, standoff compensation for soil and weathered zone under groundwater level were sufficiently effective.

• The Journal of Engineering Geology
• /
• v.11 no.3
• /
• pp.279-294
• /
• 2001

When constructing subsurface structures and drilling wells, the precise hydraulic parameters must be obtained for operating safety and for developing enough quantity of groundwater, respectively. In this study we conducted water injection test at different depths on six boreholes drilled in the granite of Mt. Geumjeong. Hydraulic conductivity was calculated using Moye and Hvorslev methods. The relation between hydraulic conductivity and fracture frequency data obtained from acoustic televiewer and core log was analyzed. From the result, though the correlation coefficient between the hydraulic conductivity and the fracture frequency from acoustic televiewer data is higher than that between the hydraulic conductivity and the fracture frequency from core log data on most of the test holes, the correlation coefficient between the hydraulic conductivity and the fracture frequency from the televiewer data is lower than 0.5. This suggests that the hydraulic conductivity of granite in the study area is influenced not only by the fracture frequency but also by various factors of fracture network such as fracture aperture and length, interconnectivity of fractures, fracture orientation and angle, filling material and so on.

• The Journal of Engineering Geology
• /
• v.9 no.3
• /
• pp.227-241
• /
• 1999

Groundwater flow in a fractured rock mass is related to the geometric characteristics of the fracture system. The objective of this study aims to analyze the probabilistic density function of fracture properties md their relations to the hydraulic conductivity in volcanic rocks of the northern Yosu area. Fracture characteristics were investigated by core logging and acoustic televiewer logging in four boreholes and the hydraulic conductivity was obtained from the constant pressure injection and fall-off tests. The 303 fractures were grouped into three sets by their orientation and three fracture types by the degree of opening in aperture. As a result of the study, the hydraulic conductivity in the test section intersected by open and semi-open fractures, conductive fractures, and set 1 fractures was very high, while closed fractures did rarely affect the hydraulic conductivity. It was recognized that the hydraulic conductivity in a fractured rock mass was preferentially affected by the aperture size of conductive fractures and fracture intersection frequency and size, secondly.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.6
• /
• pp.35-44
• /
• 2006

Various geophysical methods and geological survey were applied for prospecting of geothermal resources and the attitude of volcanic body at northern part of Kumseongsan, Euiseong. They include magnetic, self-potential, radioactive and resistivity methods, temperature logging near the earth's surface and geological survey. The results of this study are summarized as follows. Various geophysical anomalies is related to the geologically Cretaceous conduit. Anomalies of resistivity and temperature logging seem to be related to the geological structure and terrestrial heat. Small radioactive and self-potential anomalies seem to be associated with chemical character of rocks. The sedimentary rocks dip steeply toward the volcanic rocks, aquifuge. Ideal geological structure for bearing ground water and geothermal resources was founded in the study area. The study area and the adjacent two hot springs area consist of Cretaceous sedimentary and volcanic rocks, and have similar geology.

• Geophysics and Geophysical Exploration
• /
• v.15 no.4
• /
• pp.190-198
• /
• 2012

A series of density log data were obtained from the standoff experiments made in the four physical model boreholes of different densities, and the properties of spine and rib curves have been derived by the analysis of the gamma-gamma data. Particularly, the shape of gamma ray propagation path between source and detector, the geometrical property of spine and rib curves, the influence of borehole density and the detector combination on the properties of the curves, and the adequate detector combination for standoff compensation could be discussed. It was also confirmed that spine and rib slopes can be expressed as proportional to source-to-detector distance ratio between far and near detectors. The result of this experiment was also effectively applied for understanding the basic concept of spine and rib slopes.

• 한국지구물리탐사학회:학술대회논문집
• /
• 1999.08a
• /
• pp.202-216
• /
• 1999

The deep foundation is frequently used for the infrastructures. Since the quality control of the cast-in-place concrete foundations such as CIP piles and slurry walls is not so easy as that of the ready made PC(prestressed concrete) piles, it is necessary to get the information on the integrity of the concrete of the foundation. The depth estimation of foundations whose depths are unknown is also very important in repair and reinforcement works or in safety inspection and assessment to the big structures. The cross-hole sonic logging(CSL) system and the single channel reflection seismic measurement system were developed to test the integrity of pile. The former is well applied to CIP structures, while the later to all kinds of piles with less accurate result compared to that of CSL. To estimate the depth of the deep foundations, parallel seismics, borehole RADAR, and borehole magnetics can be used.

• The Journal of Engineering Geology
• /
• v.25 no.4
• /
• pp.525-532
• /
• 2015

After comparing the effectiveness of standoff compensation between current techniques using data obtained from a series of borehole model experiments for standoff compensation in 2007, 2008, and 2009, a follow-up study was conducted to find a more effective standoff compensation algorithm, Comparing the results of the application of the conventional spine and ribs technique, and the spine and ribs technique in terms of apparent density shows that the standoff compensation error obtained from the latter method is more than twice that obtained from the former. The larger size of the compensation error from the spine and ribs plot using the radioactive decay equation indicates that there are no benefits in using this equation in standoff compensation. Based on these results, we propose a reverse transform spine and ribs technique by essentially combining the conventional spine and ribs technique and the spine and ribs technique in terms of apparent density.

• Economic and Environmental Geology
• /
• v.49 no.3
• /
• pp.225-242
• /
• 2016

Rock physics serves as a useful tool for seismic reservoir characterization and monitoring by providing quantitative relationships between rock properties and seismic data. Rock physics models can predict effective moduli for reservoirs with different mineral components and pore fluids from well-log data. The distribution of reservoirs and fluids for the entire seismic volume can also be estimated from rock physics models. The first part of this report discusses the Voigt, Reuss, and Hashin-Shtrikman bounds for effective elastic moduli and the Gassmann fluid substitution. The second part reviews various contact models for moderate- to high-porosity sands. In the third part, constant-cement model, known to work well for the sand that gradually loses porosity with deteriorating sorting, was applied to the well-log data from an oil field in the North Sea. Lastly, the rock physics template constructed from the constant-cement model and the results from the prestack inversion of 2D seismic data were combined to predict the lithology and fluid types for the sand reservoir of this oil field.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2003.03a
• /
• pp.113-120
• /
• 2003

The estimation of the coeff. of permeability is a major process that influenced in very large portion to the changing of gound water movement and estimation of the outflow’s quantity in the ground water movement modelling. To overcome the error caused by difficulty of the ground investigation for the hydraulic parameter’s estimation, in this paper, we study of correlation between electric resistivity and coeff. of permeability, and analyse of coeff. of permeability from electric resistivity. To accomplish this purpose, we carry out electrical logging, AMT survey as an in-situ test, and measure electric resistivity, porosity, permeability for the intact rock as a laboratory test. Based on the results of this research, it can be applied that estimation of the coeff. of permeability using electrical logging and AMT survey is a effective method for the impossible area of the ground investigation caused by geographical condition and petition.

• Tunnel and Underground Space
• /
• v.33 no.6
• /
• pp.561-573
• /
• 2023

Korea Atomic Energy Research Institute (KAERI) constructed the KURT (KAERI Underground Research Tunnel) to analyze the hydrogeological/geochemical characteristics of deep rock mass. Numerous boreholes have been drilled to conduct various field tests. The selection of suitable investigation intervals within a borehole is of great importance. When objectives are centered around hydraulic flow and groundwater sampling, intervals with sufficient groundwater flow are the most suitable. This study defines such points as hydraulic outliers and aimed to detect them using borehole geophysical logging data (temperature and EC) from a 1 km depth borehole. For systematic and efficient outlier detection, machine learning algorithms, such as DBSCAN, OCSVM, kNN, and isolation forest, were applied and their applicability was assessed. Following data preprocessing and algorithm optimization, the four algorithms detected 55, 12, 52, and 68 outliers, respectively. Though this study confirms applicability of the machine learning algorithms, it is suggested that further verification and supplements are desirable since the input data were relatively limited.