• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.3
• /
• pp.273-281
• /
• 2019

The energy consumed by buildings among the total national energy consumption is more than 10% of the total. For this reason, Korea has adopted the zero energy building policy since 2025, and research on the energy saving technology of buildings has been demanded. Analysis of buildings' energy consumption patterns shows that lighting, heating and cooling energy account for more than 60% of total energy consumption, which is directly related to solar power acquisition and window opening and closing operation. In this paper, we have developed a low - power IoT sensor module for window system to transfer acquired information to building energy management system. This module transmits the external environment and window opening / closing status information to the building energy management system in real time, and constructs the network to actively take energy saving measures. The power used in the module is designed as an independent power source using solar power among the harvest energy. The topology of the power supply is a Buck converter, which is charged at 4V to the lithium ion battery through MPPT control, and the efficiency is about 85.87%. Communication is configured to be able to transmit in real time by applying WiFi. In order to reduce the power consumption of the module, we analyzed the hardware and software aspects and implemented a low power IoT sensor module.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.426-433
• /
• 2019

After an earthquake, fire and gas explosions are more likely to cause more casualties in cities with many apartment buildings and large complex buildings. In order to prevent this, seismic design is necessary for the fire protection sprinkler system. However, most systems currently use stainless-steel pipes, although synthetic resin pipes are used in some special places. These materials are susceptible to vibration and earthquakes. This study evaluated the displacement absorption flexibility of polyethylene (PE) and aluminum (Al) multi-layered composite pipes to increase the seismic performance in a vibration environment and during earthquakes. The seismic performance was compared with that of a stainless-steel and PE pipes. The seismic characteristics can be measured by measuring the amount and extent of vibration transmitted by the sprinkler pipe. This method can be used to judge the seismic characteristics to attenuate the vibration during an earthquake. The seismic characteristics of the pipe were verified by comparing the logarithmic attenuation rate to the initial response displacement of the vibration generated by the transverse vibration measurement method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.37 no.1
• /
• pp.9-18
• /
• 2019

The intensity and the number of days of high temperature occurrence are also high and record heat occurred. In addition, the global warming phenomenon is intensifying globally, and especially in South Korea, the urban heat island phenomenon is also occurring due to rapid urbanization due to rapid industrial development. As the temperature of the city rises, it causes problems such as the comfort of the residential living and the cooling load. In this study, the cool roof performance is evaluated according to the roof color to reduce these problems. Unlike previous studies, UAV(Unmanned Aerial Vehicle) thermal infrared camera was used to obtain the surface temperature (white, grey, green, blue, brown, black) according to the rooftop color by remote sensing technique. As a result, the surface temperature of white color was $11{\sim}20^{\circ}C$ lower than other colors. Also air conditioning temperature of white color was $1.5{\sim}4.4^{\circ}C$ lower than other colors and the digital thermometer of white color was about $1.5{\sim}3.5^{\circ}C$ lower than other colors. It was confirmed that the white cool roof performance is the best, and the UAV and the thermal infrared camera can confirm the cool roof performa.

• Korean Journal of Heritage: History & Science
• /
• v.51 no.4
• /
• pp.24-43
• /
• 2018

Thirty-five of Hwaban of Jeongjagak had been built in the last three hundred years, which means a Hwaban was made in almost every ten years. Jeongjagak is a building that requires a certain ornamentation having the identical Gongpo type, called E-ikgong, and maintains the same shape for a long time. While Hwaban is an element that faithfully serves the ornamental role, the field study found that Hwaban-chogak went through various changes over the years unlikely to Jeongjagak. This study enumerates and classifies the various types of Hwaban-chgak by outlining the similarities/differences of the various types of Hwavanchogak, and by discovering what the craftsmen aimed to express through the Hwaban-chogaks. As a result, Hwaban-chogak can be generally divided into two categories depending on the starting point of Chogak: 'Downward-Type' and 'Upward-type' and the study tried to find the origin of that. The first represents the stems of Hwaban crafts flowing from top to bottom, and the latter showing the opposite direction. Around 1740s Upward-type can be chronologically caragorised as; 'original- type' which contains lotus and 'modified- type' which eliminates lotus. It is inferred that the modified-type was caused by the employment system of the craftsmen. It is also recognized that the main frame of Hwaban-chogak had been maintained despite the fact that Chogak became increasingly ornamental for the next a hundred years from the Hwaban-chogak drawings in Whaseong-seongyeog-uigwe, which was completed in 1796. The study has a limitation that the focus of the research is only on the Hwaban of Jeongjagak and expected to look into Hwaban in the context of other construction elements such as Ikgong, Daegong and Anchogong for further studies.

• Korean Journal of Heritage: History & Science
• /
• v.40
• /
• pp.105-135
• /
• 2007

Since now, the study of wooden pagodas in ancient Korea have been proceeded to the site plan, the devices and the goods of sarari containers and the reconstruction. They are based on the result of archaeological excavations and the historical material documents. But the study of the foundations of wooden pagodas have been unsatisfactory. In this paper, the investigations of the wooden pagodas in the Three Kingdoms are proceeded. Through this action, we have checked the method of the foundations, the type and installation of Simchoseok(central base stone) and the erection of Simju(central base pillar). In the result of this study, three types were in the method of the foundations-the construction of the upper on the surface of the earth, the construction of the upper and lower on the surface of the earth. And we know the types of the installation of Simchoseok were the underground-type central base stone and the ground-type central base stoned. The factors of the central base pillars were changed with the rising of central base stones from the lower on the surface of the earth to the surface of the foundation. This change was needed to construct the larger wooden pagodas than the ones of the past. In especially, the large wooden pagodas with the ground-type central base stoned were appeared in the king of Baekje, Muwang(A.D. 600~640). We assume that the method of the construction of larger wooden pagodas like that was forwarded to Silla and Japan.

• Journal of Korean Society of Forest Science
• /
• v.100 no.3
• /
• pp.466-475
• /
• 2011

This study purposed to analyze the spatial pattern and the amount of carbon emission at the deforestation area based on the administrative and GIS data. The total size of deforestation area in last nine years (2000-2008) was about 649 ha, and it was occurred annually about 72 ha. The occurrence rate of deforestation per administrative area in Wonju was about 0.74%. It was 0.34% higher than that of Kwangwondo, and 0.06% less than that of National rate. On the other hand, the forms of deforestation by purpose were not related to the administrative district unit. The number of deforestation forms was highest at settlements. second most frequent form is other land. Grassland showed the lowest score. In addition, the deforestations were more occurred which is closed to the existing housing and building rather than roads. The number of deforestation was 1.2 times higher based on 300m. Seventy percent of deforestation was occurred which is less than 0.5 ha in size, and it increased to 91% when the size is less than 1ha. The total size of theoretical carbon emission based on deforestation area was estimated at 23,424 tc, and average annual carbon emission was estimated by 2,603 tc. Carbon emission per ha was 36.1 tC/ha. This study results will be useful to construct the greenhouse gas statistical verification system against the Post-2012 by GIS.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.1
• /
• pp.131-141
• /
• 2011

This study, as a purpose of base study for landscape redevelopement of Seowon, pointed out problems of planting patterns in each sector and suggested an alternative through analyzing old literature, complete enumeration survey in each sector and taking aerial images. the conclusions drawn from this study are as follows. A Pilam Seowon(historic site no 242) is located in a Pyungya-Sanrok(plain and mountain) district in Jangsung-gun and has Junhak-Humyo(Study room in the front and Shirne in the back) type. 23 taxonomic group of arbor, 6 taxonomic group of shrub and 5 taxonomic group of flowers are planted high-densitily in limited flat surface. It can be classified into being planted by family and being planted through landscape redevelopement in 1980s. Korean traditional trees are planted in this area like Pinus densiflora, Juniperus chinensis L., Thuja orientalis L., Zelkova serrato Makino, Sophora japonica L., Lagerstroemia indica, Prunus mume include Ginkgo biloba which is old big tree and is registered in Jangsung-gun as protected trees. The tea tree in this area was introduced from wild tea plantation in Yonhwa moutain and was planted. From now on, we have to pay consideration a form management of planted trees in the historical area, rearrangement of plant density due to over planting, removal of alien trees like Pinus bungeana and Canna generalisa, prevention a dwarfishness of main area due to over planting in outside facilities, recovery a alienation among each planting area, and planting concept from plants drawings on wall of buildings can be suggested. The implications of this case study is that introduction of over planting can make more problems like losing sense of place. Therefore, we must do a actual state survey on traditional landscape area like Seowon from preservation point of view.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.25 no.1
• /
• pp.150-163
• /
• 2022

Recently, the gated community has been increasing due to various reasons such as demand for differentiated areas and security, but various problems have been raised, including regional conflicts, traffic restrictions and disconnection of surrounding areas. Therefore, this study empirically considered what kind of spatial effect the gated community has on the surrounding area by analyzing the vitality using floating population big data and analyzing pedestrian accessibility using network analysis and social network analysis. As a result, it was found that the overall vitality in the study area was greatly affected by the land use and the building use. However, focusing on apartment complexes, even in the same land use, when the form of the complex is open to the outside, there is a lot of floating population, so the vitality is high. In terms of accessibility, assuming that the gated community is open, it was found that as the physical connectivity improved, there were more roads for pedestrians to choose from, and the accessibility improved as traffic and exchanges occurred in the disconnected space. The value of improving property rights and residential environment is also precious, but it is necessary to review how to reflect the improvement of local permeability in enhancing the publicness of cities and the value and direction of communities that can coexist with the region.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.681-688
• /
• 2022

In this study, the process of drone photography, automatic volume calculation, total floor area conversion, and waste calculation was constructed as a QGIS plug-in to predict the demolition waste (DW) generated in an aged area where drawing information or building information is uncertain. Through a case study, the high consistency between the automatically calculated volume using the drone and the BIM volume based on the field measurement was confirmed. Field application was carried out for the planned demolition work site, and the consistency between the drone-based volume and the actual measurement-BIM-based volume was reconfirmed. The waste generation unit was applied and the amount of DW was calculated by setting the floor height and building type, and the entire process was completed within 6 hours. Although the difference between building information and building objects through drones occurred according to the setting of temporary structures, loads, and floor heights, it was found that the actual amount of DW was generated more than the initial estimate. It is expected that measures to improve the accuracy of volume and floor area conversion will be required through case studies in the future.

• Journal of Bio-Environment Control
• /
• v.31 no.4
• /
• pp.292-299
• /
• 2022

This study was conducted to analyze physical and chemical properties of horticultural substrates and response of hydroponically grown two cultivars of 'Namcheon' and 'Somirang' perilla by four different substrates: coir (chip:dust = 5:5), perlite, granular rockwool, and commercial mixed substrate (cocopeat:peatmoss:vermiculite:perlite: zeolite = 50:25:10:10:5). There were no significant differences in EC and pH according to substrates. Container capacity was the greatest in granular rockwool, and it showed appropriate levels in mixed substrate and coir. Air space was higher in coir and perlite than the other treatments. Bulky density reached a proper standard in all substrates excepting coir. The leaf length and width of 'Namcheon' indicated the most in mixed substrate, though the value of 'Somirang'was greatest in coir substrate. The leaf weight of both cultivars was highest in mixed substrate, and relatively low in coir and perlite. The total yield of leaves was separated by two groups: higher group, which are mixed substrate and granular rockwool, and lower group, which are coir and perlite. There was a large gap by 28% between these two groups. Therefore, this study suggests that substrates with high water holding capacity such as mixed substrate or granular rockwool are most suitable for the hydroponic cultivation of perilla, which require sufficient moisture supply to the root zone.