• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.12a
• /
• pp.65-68
• /
• 2000

본 논문에서는 평면상에 존재하는 물체까지의 거리를 카메라시스템을 이용하여 실제 거리를 계측하는 알고기즘을 제안하였다. 계측 시스템을 교정하기 위해, 우선 3차인 실세계 좌표계와 2차원의 카메라 좌표계의 관계를 해석하고, 카메라의 변수들을 포함하는 카메라 좌표계의 변수들을 구하였다. 한편, 3파원 공간에서 계측면을 평면으로 가정하고 평면의 방정식과 좌표계 변환 방정식으로부터 뉴턴-랩슨법을 이용하여 최소값에 대응하는 근사치를 구함으로써 물체까지의 거리 정보를 추출하였다. 실제의 계측 실험에서, 도로에 표준 물체인 Ca]ibration 시트를 두고 승용차의 백미러 위치에 카메라를 설치하고 영상을 획득하였다. 계측 거리는 4m부터 lOm까지는 1m간격으로 계측하고, 10m부터 30m까지는 10m간격으로 계측하였다. 그 결과 4m에서는 약 1.4mm의 오차가 발생하였고, 30m의 거리에서는 3.5m의 오차를 보였는데 계측 거리가 길어질수록 오차가 지수함수적으로 증가함을 알 수 있었다.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.571-574
• /
• 1997

항법장치의 핵심요소인 가속도센서와 자이로센서는 선형거리추측(Linear position estimation)과 각 변위 추측(orientation estimation)시 출력 데이터에 포함된 오차성분의 적분에 의하여 시간이 증가함에 따라 선형거리 오차와 각 변위 오차가 누적된다. 이에 따라 본 논문에서는 정밀한 항법을 위한 저가의 IMU (Inertial Measurement Unit)를 설계하고, 오차성분의 사전해석을 통하여 정확한 오차모델을 찾는데 그 목적이 있다.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.3
• /
• pp.324-334
• /
• 2024

The Wavefront Curvature Ranging (WCR) is an estimation method for a source range from the wavefront curvature of acoustic waves. The conventional method uses trigonometry to estimate the source range by assuming the sound speed as a constant. Because of this assumption, range error occurs in the ocean environment where the bottom reflection is clearly separated. In order to reduce the range error, Matched Wavefront Curvature Ranging (MWCR) was proposed applying the sound speed structure in the ocean environment and Maximum Likelihood Estimation (MLE). The range error was reduced in the results of the simulation on the proposed method. In the future, this method will be applicable to the sonar system if the reliability of ranging is confirmed by measured signal.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.25.5-26
• /
• 2011

이 연구에서는 네트워크 기반의 다중기준국을 이용하여 육상교통환경에서 항법위성의 궤도력에 따른 위치결정 성능향상의 정도를 분석하였다. 위성항법보정시스템(Differential Global Positioning System)을 활용하였을 경우 항법위성의 궤도력 오차정보가 소거되지 않는다는 가정 하에 방송궤도력이 아닌 International GNSS Service(IGS) 정밀궤도력중 신속궤도력(Ultra-Rapid)을 이용하여 궤도력 오차에 따라 위치결정 정확도가 향상됨을 확인하였다. 일반적으로 사용하는 위성항법보정시스템을 활용한 위치결정 방법은 기준국과 사용자의 거리에 따라서 그 성능이 달라진다. 이는 궤도 오차, 대류층 및 전리층 오차 등이 거리에 의존적이기 때문이다. 다중기준국을 활용하는 방법은 거리가 멀어짐에 따라 소거되지 않는 오차등을 극복하기 위한 기술이며 사용자 주변을 둘러싼 기준국들의 측정값을 조합하여 보상을 하거나 정확하게 모델링하여 사용자에게 오차정보를 보정정보로 전송하여 위치결정의 성능을 향상시키는 방법이다. 분석된 결과는 네트워크 기반의 다중기준국 환경에서 사용자와 기준국간의 거리에 따른 공간이격 오차정보 보정정보 생성 연구에 활용하며 이를 통해 육상교통 사용자의 위치결정 정확도 성능을 향상하는데 기여할 것으로 기대된다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.185-194
• /
• 2002

To extract relative ranges from LOS(line of sight) information, we propose a passive ranging filter which is suitable for anti-ship missiles in HOJ(home on jam) mode. The proposed filter is devised to cope with the case that a passive ranging filter may include a large initial range estimation error since modem jammers are capable of very long range jamming. In addition, under the assumption that the missile motion is dominant over the HOJ engagement situation, the engagement geometry is modeled by a second order system. A new passive ranging filter is proposed by constructing an extended Kalman filter(EKF) based on the model. And then a least square initial state error estimation algorithm is attached to the EKF. Simulation results show that the proposed filter has a good range estimation performance with small computational load.

• The Journal of the Acoustical Society of Korea
• /
• v.38 no.6
• /
• pp.630-636
• /
• 2019

Passive Ranging Sonar (PRS) is a type of passive sonar consisting of three sub-array on the port and starboard, and has a characteristic of detecting a target and calculating a bearing and a distance. The bearing and distance calculation requires physical sub-array position information, and the bearing and distance accuracy performance are deteriorated when the position information of the sub-array is inaccurate. In particular, it has a greater impact on distance accuracy performance using plus value of two time-delay than a bearing using average value of two time-delay. In order to improve this, a study on sub-array position error estimation and error compensation is needed. In this paper, We estimate the sub-array position error based on enetic algorithm, an optimization search technique, and propose a method to improve the performance of distance accuracy by compensating the time delay error caused by the position error. In addition, we will verify the proposed algorithm and its performance using the sea-going data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.3
• /
• pp.914-919
• /
• 2010

It is confirmed that as the distance measurements accuracy of the SDS-TWR(Symmetric Double-Sided Two-Way Ranging) based on CSS(Chirp Spread Spectrum) is considerably degraded due to frequency interference and it causes to severe errors in the localization applications. In this paper, the compensation algorithm based on error rate offset of distance measurement ($CA_d$) is proposed for the purpose to reduce the ranging errors due to by the SDS-TWR ranging problems. The $CA_d$ measures the distance values between two nodes by means of 1m interval about 1~25m distances in the SDS-TWR, and compensates the distance values using the parameters related to the distance compensation. From the experiments, it is analyzed that the $CA_d$. have reduced the distance error to average 95cm and maximum 526cm, and the distance error by the $CA_d$ was below about 60cm in the 25m distances. In particular, the performance of the distance measurements accuracy by the $CA_d$ is very high in LOS(Line Of Sight) environments.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1412-1413
• /
• 2008

본 연구에서는 산업용 거리 계측기에서 정밀한 측정에 요구되는 오차 보정 기법을 제시하였다. 제시한 기법은 본 연구에서는 산업용 거리 계측기에서 보다 정밀한 측정을 위한 방법으로 측정하고자 하는 기법을 전원회로에서의 잡음, 공급 전원의 잡음, 공통모드에서의 잡음, 중간주파수에 섞여 있는 잡음 및 비교기에서의 오차 저감 기법을 제시하고자 한다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.12
• /
• pp.105-113
• /
• 2008

In Ubiquitous Society, accurate Location Calculation of user's device is required to achieve the need of users. As the location calculation is processed by ranging between transceivers, if some obstacles exist between transceivers, NLoS(Non-line-of-Sight) components of received signal increase along with the reduction of LoS(Line-of-Sight) components. Therefore the location calculation error will increase due to the NLoS effect. The conventional location calculation algorithm has the original ranging error because there is no transformation of ranging information which degrades the ranging accuracy. The Iterative Calculation method which minimizes the location calculation error relys on accurately identifying NLoS or LoS condition of the tested channel. We employ Kurtosis, Mean Excess Delay and RMS Delay spread of the received signal to identify whether the tested channel is LoS or NLoS firstly. Thereafter, to minimize location calculation error, the proposed Iterative Calculation method iteratively select random range and finds the averaged target location which has high probability. The simulation results confirm the enhancement of the proposed method.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.3
• /
• pp.218-227
• /
• 2017

In this paper, an algorithm to calculate both bearing and distance error for target detection and localization is proposed using the Cramer Rao lower bound to estimate the minium variance of their error in DOA (Direction Of Arrival) estimation. The performance of arrays in detection and localization depends on the accuracy of DOA, which is affected by a variation of SNR (Signal to Noise Ratio). The SNR is determined by sonar parameters such as a SL (Source Level), TL (Transmission Loss), NL (Noise Level), array shape and beam steering angle. For verification of the suggested method, a Monte Carlo simulation was performed to probabilistically calculate the bearing and distance error according to the SNR which varies with the relative position of the target in space and noise level.