• Journal of the Korean GEO-environmental Society
• /
• v.7 no.4
• /
• pp.43-52
• /
• 2006

There were huge damages of human beings and their properties in many areas of the basin of the Nak-Dong river by the unusual weather and the localized downpour recently. In this research against disasters, we want to know strength of the cemented sand that is mixed with cement and poor-graded sand, to estimate CSG(Cemented Sand and Gravel) method used coffer dam in Japan, which is the materials of riverbed in the basin of the Nak-Dong river for levee's construction. For that, we want to provide the fundamental data which need in the examination of adaptation of levee's material, design and analysis by investigating compressive strength by curing period and cement content, elastic modulus and stress by transformation from compaction test, CBR test, unconfined compression test and triaxial compression test as changing cement content from 2% to 8% at two sites in the basin of the Nak-Dong river.

• Journal of the Korean GEO-environmental Society
• /
• v.2 no.2
• /
• pp.33-39
• /
• 2001

In order to utilize mass of oyster shells for a partial substitute material for reclamation, the shear characteristics of two-phase mixture soil with oyster shells were investigated with $\overline{CU}$ test. From various experiments, it was found that the increase of mixed ratio of oyster shells causes the shear strength of mixed soil. And this phenomenon not only depends on friction due to confining pressure such as pure clay but also is influenced by shaping skeleton of oyster shells. Also, it was discovered that there were many influences by clay-oyster shell mixture from the study of the secant modulus and dilatancy characteristics of mixed soil. In addition, variation of oyster shell skeleton during shearing stage is examined applying modifying coefficient concept.

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.8
• /
• pp.51-58
• /
• 2014

In this research, the composite grounds including original clay and soil-cement were constructed for conducting uniaxial compression test. Strength and deformation properties were analysed using results of laboratory tests with variations of water content of clay, replacement ratio and cement content. Numerical simulation using 3D distinct element method was conducted for soil cement. For strength of composite ground that contains more than cement contents of 15 %, it is more effective to increase cement content than increase of replacement ratio. Strength and elastic modulus of composite ground could be predicted by regression equations using uniaxial compression strength of clay, cement content of soil cement and replacement ratio. For strength and elastic modulus of soil cement, which is most important things for predicting final strength and elastic modulus of composite ground, numerical simulation using the distinct element method adapted bonding model could be used to verify laboratory test, and predict strength and elastic modulus.

• Journal of Korea Water Resources Association
• /
• v.56 no.spc1
• /
• pp.1015-1026
• /
• 2023

The confluence of rivers, where rivers meet, is a place known for complex water mixing dynamics. Sometimes, these rivers flow downstream without mixing. While this non-mixing can pose challenges for water quality management, it also offers the potential for improved water extraction in nearby water intakes (Chilseo). In this study, we analyzed the mixing dynamics at the confluence of the Nakdong River and the Nam River using drone imagery, water quality indicators like Electrical Conductivity, and hydraulic factor Secondary Flow. We found that meandering effects hindered mixing, as shown by the comparison of Secondary Flow and Electrical Conductivity distributions. Additionally, the Chilseo Water Purification Plant downstream of the Nakdong River-Nam River confluence extracted unmixed Nam River water during certain periods.

• Journal of Energy Engineering
• /
• v.26 no.4
• /
• pp.1-6
• /
• 2017

This study evaluated hydrogen effect of metal and non-metallic materials used in the hydrogen blended natural gas vehicle. Hydrogen penetrated concentration of 34Cr-Mo steel(850MPa tensile strength) for winter driving conditions was measured 0.0018ppm and summer driving conditions was 5.3ppm. The critical hydrogen concentration of high strength metal used in this study was measured 1.03ppm by CLT. Therefore, 34CrMo steel cas cause problems in the 30% HCNG(25MPa) environment. In case of the test for non-metallic materials, all materials met the criteria of the gas resistance test, but Fluorocarbon Rubber material had a significant change in the volume. So if it is used, extra care is needed.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.1
• /
• pp.35-43
• /
• 2023

In this study, the mechanical properties of concrete mixed with non-sintered hwangto(NHT) as an alternate material for cement were evaluated, and the compressive strength prediction equation of concrete based on ultrasonic pulse velocity analysis was proposed. Cement replacement rates for mixed NHT were set to 0, 15, and 30%, and design compressive strength was set to 30 and 45MPa to evaluate the effect on the amount of cement and NHT powder. The mechanical properties items analyzed were compressive strength, ultrasonic pulse velocity, and elastic modulus, and were measured on days 1, 3, 7, and 28. As the replacement rate of NHT increased, the mechanical properties tended to decrease. In addition, as a result of analyzing the correlation between compressive strength and ultrasonic pulse velocity, the correlation coefficient(R²) showed a high relationship(R²=0.95) on concrete mixed with NHT.

• Cement
• /
• s.151
• /
• pp.44-54
• /
• 1999

• Resources Recycling
• /
• v.24 no.6
• /
• pp.61-68
• /
• 2015

In this study, the strength properties of NHL based mortar with blending basalt fiber were investigated. In the first step, it was evaluated that physical properties of NHL based mortar according to mixing method of four types of basalt fiber and then mixing method of one type was selected. As a result of assessment, it showed that the physical properties with mixing method of dry blending were better than that of wet blending and mixing method that basalt fiber pre-mixed with NHL for 5 min in a blender was selected and water and aggregate were finally added. Secondly, the investigation of blending fiber length on the compressive and flexural strength for basalt fiber reinforced NHL based mortars was carried out. The compressive strength was decreased with adding fiber, and the flexural strength was increased more than plain mortar. In the case of adding 6 mm fiber, the compressive and flexural strength were improved more than that of others.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.213-213
• /
• 2023

하천의 합류부는 두 하천이 만나 형성되는 지역으로 복잡한 혼합 거동을 보인다. 합류부에서는 실제로 수리 특성이 유황에 따라 다양하게 변화하고 수환경 특성도 함께 변화하며, 이로 인해 본류와 지류에 비해 다양한 생태학적인 종이 분포하는 등 환경적으로 중요구간 중 하나이다. 합류부의 혼합 거동을 이해하기 위해서는 다양한 유황에 따른 수체 혼합 거동을 2차류를 통해 분석하는 것이 중요하다. 해외의 경우 2차류의 패턴을 통해 합류부에서의 혼합 거동을 공간적으로 분석한바 있으나(Riley and Rhoads, 2012), 대부분의 연구들은 중·소규모의 하천을 대상으로 진행되어 대규모 하천에서의 확인은 미흡한 상태이다. 또한, 실제 현장에서 계측을 통한 데이터 획득과 후 처리의 어려움으로 인해 현재 국내에서는 2차류 패턴을 통해 대규모 하천 합류부의 혼합 거동을 확인한 사례는 전무한 실정이다. 따라서, 본 연구에서는 Sontek사의 ADCP를 통해 계측된 수리 데이터를 Rozovskii의 방법을 기반으로 한 2차류로 나타내 낙동강-금호강 합류부에서의 공간적인 수체 혼합을 확인하였다. 혼합거리를 판단하기 위해 합류 이후 혼합의 경계면(Shear Layer)에서 나타나는 2차류의 특이한 패턴(Helical motion)을 주요 지표(Index)로 사용하였다. 그리고, 수질 센서인 YSI EXO2의 수표면 전기전도도의 분포를 통해 합류부에서 본류와 지류의 혼합거리를 산정하였으며, 2차류의 패턴과 비교하였다. 분석 결과, 대규모 하천에서 2차류의 특이한 패턴이 존재함을 명확히 확인하였다. 본류와 지류의 모멘텀 비에 따라 서로 다른 패턴의 혼합양상을 2차류를 통해 확인할 수 있었으며, 2차류의 혼합 패턴과 전기전도도의 분포를 비교 분석하여 합류부에서의 혼합을 3차원적으로 해석하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.244-247
• /
• 2008

Based on ISL' S225 superdetonative mode ram accelerator, numerical simulation is conducted for strong mixture cases ($2H_2+O_2+3CO_2,\;2H_2+O_2+2.5CO_2$). For 3.0CO2 case, projectile is not acclerated, but 2.5CO2 case has sucessful acceleration. It shows that superdetonative mode ram accelerator can be operated when using mixture which strong enough to ignition.