• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.6
• /
• pp.100-109
• /
• 2011

Recently, the concrete-steel hybrid extradosed bridge has been proposed as alternative bridge type at long span site. The hybrid extradosed bridge adopts light orthogonal deck girder instead of heavy concrete deck girder at the center span of bridge, and it enables to construct long-span bridge. And also, for this bridge type the decrease of self-weight of girder enables to reduce girder depth and side span length of extradosed bridge, so its type has more efficient structural behavior and makes it possible to perform optimal bridge design. Therefore, it is very important to set up the procedure and parameters of optimal design for concrete-steel hybrid extradosed bridge. In this study, the effects of design parameters (the variation of pylon height, bridge deck depth and orthogonal deck girder length) are discussed. And numerical analysis and sensitivity analysis are carried out according to these parameters. And design weight values about these parameters are quantitatively suggested to reflect characteristics of concrete-steel hybrid bridge.

• Korean Journal of Remote Sensing
• /
• v.16 no.1
• /
• pp.47-54
• /
• 2000

We compared the satellite observed temperature with the radiosonde observed temperature in the Korean Peninsula. The radiosonde observed data were obtained from four upper air observation stations in the Korean Peninsula from 1981 to 1998, and were compared with the satellite observed data of the channel-2 and channel-4 of microwave sounding unit(MSU) on board NOAA series of polar-orbiting satellites. The radiosonde data were reconstructed from radiosonde T$_b$ using MSU weighting function. The monthly climatology shows radiosonde T$_{b2}$ is higher than MSU T$_{b2}$ in summer. The correlation between MSU T$_{b2}$ and radiosonde T$_{b2}$ is 0.72-0.76 and 0.73-0.81 between MSU T$_{b4}$ and radiosonde T$_{b4}$. The T$_{b2}$ show a positive trend and the T$_{b4}$ has a negative trend during the 18 years.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.8
• /
• pp.370-374
• /
• 2006

Mel-frequency cepstral coefficients are widely used as the feature for speech recognition. In FMCC extraction process. the spectrum. obtained by Fourier transform of input speech signal is divided by met-frequency bands, and each band energy is extracted for the each frequency band. The coefficients are extracted by the discrete cosine transform of the obtained band energy. In this Paper. we calculate the output energy for each bandpass filter by taking the weighting function when applying met-frequency scaled bandpass filter. The weighting function is Gaussian distributed function whose center is at the formant frequency In the experiments, we can see the comparative performance with the standard MFCC in clean condition. and the better Performance in worse condition by the method proposed here.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.1
• /
• pp.36-42
• /
• 2006

A Principal component analysis (PCA)-based Mel-Frequency Discrete Wavelet Coefficients (MFDWC) feature Parameters for speaker verification system is Presented in this Paper In this method, we used the 1st-eigenvector obtained from PCA to calculate the energy of each node of level that was approximated by. met-scale. This eigenvector satisfies the constraint of general weighting function that the squared sum of each component of weighting function is unity and is considered to represent speaker's characteristic closely because the 1st-eigenvector of each speaker is fairly different from the others. For verification. we used Universal Background Model (UBM) approach that compares claimed speaker s model with UBM on frame-level. We performed experiments to test the effectiveness of PCA-based parameter and found that our Proposed Parameters could obtain improved average Performance of $0.80\%$compared to MFCC. $5.14\%$ to LPCC and 6.69 to existing MFDWC.

• The Korean Journal of Applied Statistics
• /
• v.29 no.7
• /
• pp.1155-1163
• /
• 2016

This paper deals with an estimation procedure of variance components in a mixed effects model by projections. Projections are used to obtain sums of squares instead of using reductions in sums of squares due to fitting both the assumed model and sub-models in the fitting constants method. A projection matrix can be obtained for the residual model at each step by a stepwise procedure to test the hypotheses. A weighted least squares method is used for the estimation of fixed effects. Satterthwaite's approximation is done for the confidence intervals for variance components.

• The KSFM Journal of Fluid Machinery
• /
• v.7 no.2 s.23
• /
• pp.7-13
• /
• 2004

In an attempt to solve multiobjective optimization problems, weighted sum method is most widely used for the advantage that a designer can consider the relative significance of each object functions by weight values but it can be highly sensitive to weight vector and occasionally yield a deviated optimum from the relative weighting values designer designated because the multiobjective function has the form of simple sum of the product of the weighting values and the object functions in traditional approach. To search the design solution agree well to the designer's weighting values, we proposed new multiobjective function which was the functional of each normalized objective functions and considered to find the design solution comparing the distance between the characteristic line and the ideal optimum. In this study, proposed multiobjective function was applied to design high efficiency and low noise axial flow fan and the result shows this approach is effective for the case that the quality of the design can be highly affected by the designer's subjectiveness represented as weighting values in multiobjective design optimization process.

• The Korean Journal of Financial Studies
• /
• v.6 no.1
• /
• pp.47-65
• /
• 2000

효율성은 산출물의 가치와 그 산출물을 창출해 내기 위해 생산과정에서 소비한 투입물 가치의 비율로 나타낸다 투입물이나 산출물의 시장가격이 존재하는 경우 이 값을 가중치로 이용하여 산출물과 투입물의 가치를 계산할 수 있다. 그러나 투입물과 산출물의 종류가 다양한 경우에는 투입물의 가치를 적절히 평가하기가 쉽지 않다. Data Envelopment Analysis(DEA)모형은 효율성을 여러 가지 투입물의 가중평균에 대한 여러 가지 산출요소의 가중평균의 비율로 표시하며, 특정 의사결정단위의 효율성 정도는 유사한 투입 산출구조를 가지는 준거집단과 비교하여 상대적으로 측정하고자 하는 방법이다. 본 논문에서는 DEA모형의 구조와 이론적 근거, 그리고 적용상의 장단점에 대해 알아 본 뒤 국내 일선우체국의 운영자료를 토대로 하여 공공적인 성격을 띠는 기관의 운영효율성 측정에의 적용사례를 제시하였다. 투입자료로는 '98년 우정사업자료를 중심으로 공통영업비, 우편영업비, 금융영업비, 직원수, 관할가구수, 관할면적, 고정자산 등 7개 변수와 우편영업수익, 금융영업수익, 보험수지차, 배달 및 중계 우편물량, 현금출납 취급건수, 연평잔실적의 6개 변수를 각각 투입물과 산출물 변수로 설정하여 모형을 구축하였다. 분석대상으로 삼은 64개 우체국 전체의 효율성 평균은 82.14%으로 나타났으며 DEA모형의 효율성결과와 기존에 이미 발표된 정보통신부 평가결과와의 상관관계는 0.46291로 강하지는 않지만 두 변수간에는 정(正)의 상관관계가 있음을 알 수 있었다.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.1
• /
• pp.83-89
• /
• 2000

Antenna arrays at base-stations can be used to transmit and receive information selectively in space by reducing the interference effects. In this paper, a new model of locally scattered signals in the vicinity of mobiles is proposed, and under this model the weights of the beamformer are obtained. Computer simulation results demonstrate that the proposed scheme shows an excellent performance and works well even in the urban environment where there exist many multipath propagations with wide angular spread.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.911-913
• /
• 2013

The user's context awareness is important to the reliability of sensors data. The sensor data is constantly change to external temp, internal& external environment and vibration. This noise environment is affecting that the data collected information from sensors. Of course this method of digital filter and inference algorithm specifically request for the use of ripple noise and action inference. In this paper, experiment was a comparison of the KF(Kalman Filter) and WMAF(Weight Moving Average Filter) for noise decrease and distortion prevention according to user behavior. And, we compared the EWDF(Extended Weight Dual Filter) with several filer. In an experiment, in contrast to other filter, the proposed filter is robust in a noise-environment.

• Survey Research
• /
• v.10 no.1
• /
• pp.169-186
• /
• 2009

The propensity score method is used to minimize the bias level in social survey, which comes from nonresponse. The theoretical concept and the background of the propensity score method is discussed first. The propensity score method was first applied in the epidemiology observational study. I have summarized the process of the three propensity score methods that were used to reduce estimation bias in this study. Matching by propensity score is applied to the relatively large control group. Subclassification has the advantage of using whole control group data and regression adjustment is applied to multiple covariates as well as propensity score of each unit is computable and usable. Lastly, the application procedures of propensity score method to reduce the nonresponse bias is suggested and its applicability to real situation is reviewed with the existing data.